Video

By far the best video I’ve seen for anything ever to do with a car repair/maintenance.

Mine has no power going to the dis fuse?

Do you know where I can get a brush guard like yours? I saw only 2 on ebay, one doesn't ship (you have to pick it up). The other is $1000 and used. I'll take used, but I was hoping for a little less in price with minimal rust.

Is it the same for 2017 2.0?

I have a 1998 Deville and I am trying to do this recharge of the AC system. I thought it would be easy as the video is exactly my engine. I ordered a gauge from Amazon and it did not have that blue color but a brass end. When I went to attach it - supposed to be a fool proof attachment. Well my end was too big and did not attach. The provider did send other attachments and my question is....could I use a adjustable wrench to take off the nipple that is on the low side and replace it with one that fits. I don't want to attempt it before knowing if I will damage that aluminum tubing. Not sure how I can attach a couple of pictures.

Make it easy 🎉

Great video!!! Thanks👍

The ground is the most overlooked aspect of issues

in the video you mention a video and link in the upper R corner to replace the thermostat and I don't see that video anywhere for 2000-2006 Yukon?

This is a great video. It was super informative and very helpful. I followed every step of the way and it worked!!!!! Thank you thank you. 🎉

One last thing, as all of my hamsters are now running in the same direction in my head LOL please please check your tires and especially your spare tire to make sure the dot date is less than 10 years old. If you are in an accident involving injuries most investigators will check the condition of your tires and the dot date as part of establishing liability and cause of accident. Now this probably involves things such as condition of your tread because you slid or the tire exploded or something like that but it also leads them to want to see the date and look at the dry rot on the side of the tire and things of that nature. Again this mainly deals with bad accidents not just because you need to get towed or you need a tire change. Bottom line is, when an investigator is establishing fault and the parameters and conditions that participated in the accident they will go to the tires as well as the driving data that is stored in the computer of your car. This establishes braking, & speed.. have a good day

Another slightly cheaper alternative is, if you have a 150 watt inverter or something close to that, you can connect it to the DC outlet or clamp it to your battery and just use an electric drill to quickly take off your lugs and put them back on, and you can still use a breaker bar to break the lug and cinch the lug down. If you fail to plan you plan to fail

I have one more little thing to add, consider going to Harbor Freight and getting yourself one of those silver tire inflators with the coiled yellow hose. I have a suburban and I caught a nail on 95 coming back from Disney world, on the driver side rear tire, and my TPMS warning signal came on. I can hear the tire hissing. I put the compressor on and blew it up to 40 and then hustled to my next exit and stopped on a flat surface which I think was a gas station parking lot. If you're handy, these are definitely the things you want to carry. Slip-on suit gloves, a small prescription bottle filled with Gojo, a quart of water & towels, an impact wrench 3/8 paddle bit for lowering your spare tire, the proper lug socket, a piece of flat wood about 18 inches by 18 inches. I have actually made all of my kids who are in their 20's, go out and change the tires on their car two or three times in the driveway for practice. It was 104 degrees last week, and AAA told me they are very busy it would be about an hour and a half for a simple Tire change service. I said screw that and did it myself. Unless you had a catastrophic tire failure, that mini compressor is an awesome way to keep blowing up your tire and getting you down the road until you can get to an exit, or a very very wide pullover Lane. If people are stupid enough to drive into the back of a state police vehicle on the side of the road, what do you think they will do to you when you're trying to change a tire and your 3 inches away from the right lane? Now if you have a pull off plus 10 or 15 ft of grass, good luck trying to Jack car up if it's on the passenger side and it's on the grass and you don't have that wood.

Hey,thanks again . I appreciate you and your how to videos C'ya, Ricky

Thank you

Where is part 2

When do u change the wires and is it snap in

Thanks, the DIY video was clear and concise!!!!

This helped me big time after a year no cigarette lighter

That's so interesting and informative. Never knew it existed. Would this work for a 2016 Chevy Silverado?

hey what size turn buckle did you use

Pozdrowienia z Polski ;) Twoje filmy to super pomoc.

Thanks homie

Where is fuse located for reverse lights

Thank you kindly. That was my issue but this is the 2nd time it has blown in the last month. They put a 30A fuse in it🤦🏽‍♂️.

I have a 2000 gmc yukon denali with no sound but there are 2 fuse boxes, 1 under the hood and one to the left of the steering wheel. Which fuse should i check?

Is this the same process for a 2002 Denali with the 6.0?

Great video, thanks for sharing. Helped out a lot.

I said hi

Question. You removed what looks like an aftermarket motor. (White fan) and installed a factory oem fan? I see you cleaned the back plate with the three fins and installed the back plate. Was that correct? Reason i ask is my dads 1994 deville with a 4.9 deville has a problem, and the fan stays on with the key out of the ignition. The car has 50 ,000 miles. I have been looking to replace the fan, but everyone says the original is best, with less noise and lasts. I can not find one but only aftermarket .iIwas wondering if i should try this and clean the 3 contact blades . If that does not work, what fan with module do you recommend? Thanks!

Do you know where you can buy that charging hose with gauge ?

What happened to the spark plug wires heat shield?

How long are these spark plug wires?

What is it for

I have a gage temperature. On the lower left hand side of the dashboard

do the temp level suppose to be straight up at on the dash

This job sucks. I’m attempting it on my 04. As it turns out the bottom nut was seized and the whole bolt started spinning after it ripped through the bumper underneath. So I took the bumper cover off (which should’ve been easy but it’s 95 degrees out here right now) so I could get to the nut which is a fuckin torque! Bent my torque drive trying to loosen it. I’ve just given up. I’m about to cut the damn thing out.

That’s pre gap already… you just messed it up😂

This is very bad, and wrong way. First you need to remove air and humidity from that hose. You better don't put the can upside down because you put liquid instead of gas in the low side. Is not good to add gas without checking high side.

Большое спасибо.Очень детальное видео.❤

Does that apply to a 2019 Chevy Tahoe my AC compressor does not turn on is the the fuse is in the same spot

Thanks i wanted figure out a secure spot to put jack stands to rotate tires this helps

How come when I unscrewed the tensioner it didn’t remove any tension at all?

My 04 escalade esv side mirrors not staying adjusted..... After I program them for driver 1 they go to another setting next time I start the vehicle

2 minutes of useful information crammed into a 10 minute video

Sir, whats your take on upgrading to a 2011 unit on a 2006 Tahoe 5.3. All the upgrades videos I saw were for duramax trucks, wondering if it will fit a 2006 Tahoe/yukon 5.3 or 6.0 ?

Thanks, 👍. This gives me an idea of how my neighbors GMC spark plugs replacement will be. I was asked today if i could help do it and it looks fairly simple. Although, she has the 2004 year. I probably going to buy myself the spark plug boot puller, i don't have one and definitely need one because I'm always having trouble pulling my plug boots and slamming my knuckles into metal everytime i do my '05 ford explorer.thanks again 👍.

THANK YOU! This is what I needed when I typed in "how to use wood putty". Instead I got videos that were for more advanced folks. Or some guy just blabbing on and on. Thank you for having a simple video for people who just want to see someone else use the stuff so we can learn how to use wood putty. Lol you're awesome man

I can't seem to get my mirrors to fold in to reset them . Any suggestions

I replaced my thermostat and water pump and it's still over heating at idle