- 8
- 705 239
ConStruct++
Registrace 10. 12. 2013
Welcome to ConStruct++
This CZcams channel has been created by Dr Lampros Koutas, an Assistant Professor at the Department of Civil Engineering, University of Thessaly, Greece.
The scope of the channel is to provide useful insights into structural engineering aspects. The focus will be on reinforced concrete (RC) structures.
Channel's icon: www.flaticon.com/free-icons/cement-truck
Banner: Background Vectors by Vecteezy www.vecteezy.com/free-vector/background
This CZcams channel has been created by Dr Lampros Koutas, an Assistant Professor at the Department of Civil Engineering, University of Thessaly, Greece.
The scope of the channel is to provide useful insights into structural engineering aspects. The focus will be on reinforced concrete (RC) structures.
Channel's icon: www.flaticon.com/free-icons/cement-truck
Banner: Background Vectors by Vecteezy www.vecteezy.com/free-vector/background
RC Column | reinforcement | RCC column | rebar detailing | building construction | 3D animation
3D visualization of steel rebar configuration in ten typical sections of reinforced concrete columns. The stirrups arrangement is typical for sections with ductility requirements. The longitudinal reinforcement provided is the minimum required based on the stirrups configuration. The quantity of longitudinal rebars may vary depending on the design demands. Spacing between stirrups may also vary (e.g. stirrups may be denser particularly at the column's ends).
The animation was created with SketchUp Make 2017.
© Lampros Koutas
The animation was created with SketchUp Make 2017.
© Lampros Koutas
zhlédnutí: 1 264
Video
Two way RC solid slabs | beams | columns | rebar placement | reinforcement details - 3D animation
zhlédnutí 537KPřed rokem
3D visualization of rebar placement in orthogonal two-way RC solid slabs of typical dimensions. The animation was created with SketchUp Make 2017. © Lampros Koutas
RC beam testing - Flexural versus Shear failure (w. subtitles)
zhlédnutí 1,9KPřed rokem
Reinforced concrete beam testing: flexural versus shear failure Κάμψη δοκού οπλισμένου σκυροδέματος: καReinforced concrete beam testing: flexural versus shear failureμπτική & διατμητική αστοχία Σκοπός του βίντεο είναι η κατανόηση της επιρροής της όπλισης στοιχείων ΟΣ στη συμπεριφορά τους, όταν υπόκεινται σε κάμψη. Παρουσιάζονται βίντεο από δύο δοκούς ΟΣ οι οποίες αστοχούν με διαφορετικό τρόπο: ...
One way reinforced concrete slab (RCC slab) - | Rebar placement | Animation
zhlédnutí 142KPřed 4 lety
This video presents a 3D visualization of rebar placement in orthogonal one-way RC slabs with cantilever (typical dimensions). It actually visualizes the results of an example solved in the class - Undergraduate Module: "Reinforced Concrete Design II" (Dept. of Civil Engineering, University of Thessaly, Greece - www.civ.uth.gr) Note: The animation does not include bar anchorage details or bar o...
Reinforced Concrete Design - Lab tests on RC beams
zhlédnutí 7KPřed 5 lety
Department of Civil Engineering - University of Thessaly - Greece Concrete Technology and Reinforced Concrete Structures Lab (contest.civ.uth.gr) As part of the undergraduate module "Reinforced Concrete Design I", two RC beams were tested at the Concrete Technology and Structures Lab. One beam was designed to fail in flexure, whereas the other one was designed to fail in shear. Tests were perfo...
Continuous RC beam | rebar placement | reinforcement details - 3D animation
zhlédnutí 13KPřed 5 lety
This video presents a 3D visualization of rebar placement in typical rectangular-section continuous RC beams. It actually visualizes the results of an example solved in the class - Undergraduate Module: "Reinforced Concrete I" (Dept. of Civil Engineering, University of Thessaly, Greece - www.civ.uth.gr) Note: The animation does not include bar anchorage details or bar overlaps The animation was...
Crank alternately provide karte hain consecutive nahi
What software did you use to make this movie?
The 3D model and the animation were made using SketchUp Make, while the final video file was made using Filmora.
Galt ha😊😊😊😊
Good
good luck
Qual a dimensão dessa maquete
Nice one
Thanks for watching
❤😮 Gasujok
Good jobs building❤❤🎉🎉 nice
Thank you for the positive comment
অসাধারণ
Nice video
Ke apps
Ek hi bar ki donon taraf crank Laga sakte hain
Keren Banget
Nice animation. Really helpful 👍
Glad it was helpful!
Thanks vertical:
I really want to know how to make this video, help teach❤ Nice video
💯💯
❤
how to calculate strain from this experiment? pls explain i haave a presentation this week
Hi! I am afraid I will disappoint you. I am not here to give general answers to students unless they are strictly related to what the video presented. Please advise your books, lectures and available literature. If you are still in doubt, do not hesitate to reach your professors.
Nice video 😢😮😮😅😅😅😊
Exelent❤❤
What's the name of this software please
It's SketchUp
what plugin? @@ConStruct_plus
👍
Thank you
μα οταν δεν εχει συνδετηρες στις στηριξεις τι να περιμενουμε στη δοκο shear! Δεν ειναι σωστα οπλισμενη, γιατι συγκρινουμε μια σωστα οπλισμενη δοκο με μια λαθος!?
Οι δοκιμές αυτές έγιναν για εκπαιδευτικούς σκοπούς, ακριβώς για να γίνει κατανοητό το πόσο μεγάλο ρόλο παίζει η όπλιση μιας δοκού στον τρόπο αστοχίας της. Θα μπορούσαμε να έχουμε διατμητική αστοχία ακόμη και με συνδετήρες αλλά ανεπαρκείς σε σχέση με την τέμνουσα που θα μπορούσε να αναπτυχθεί. Στις συγκεκριμένες δοκιμές επιλέξαμε να μην τοποθετήσουμε καθόλου συνδετήρες στο διατμητικό άνοιγμα της δοκού SHEAR, ώστε να είμαστε 100% βέβαιοι ότι θα λάβουμε διατμητική αστοχία (είχαν προηγηθεί βεβαίως εκτιμήσεις μέσω υπολογισμών).
@@ConStruct_plus Το καταλαβαίνω απλά η σύγκριση με την άλλη ορθως οπλισμενη δοκο με παραξενεψε. Ευχαριστω!
Hii can you help me
Hi, how can I hel you?
I like wanted SketchUp file of your video and to make friends share knowledge etc
@@structuralchannel2507 Please contact me via email with more details on your request (koutasciv@gmail.com)
جيد شكرا
Do you have a table to shown lab test result vs design cal ?
I am afraid not. The test was done for educational purposes to demonstrate the different failure modes.
Why extra reinformnet at support
because there is tension there
Which software is used to make that beam ....
Nice video.. I've learned something
Nice
Very nice construction
Συγχαρητηρια για τη δουλεια σας!
Nice video 😊