You sir are a GENIUS. You saved me time and money. Garage wanted 200 with parts to charge it out. Parts cost me 24 and took me about 15 mins. AFTER watching you video
He took a separate wire, stripped the ends. Jammed em in the relay and fuse. They end up feeding power to eachother. I just did it and it worked, I am so shocked. 10/10 hack
The repair cost to properly fix the cluster is reasonable. I'm assuming that bypassing the accessory delay relay only keeps the radio and power windows going, but the cluster itself still powers down? Does the radio shut off with key-off?
Mine needs fixed also, I have watched several of these videos and can't figure out why in every video I watched everyone was avoiding pulling the headlights by cutting them, I had my taillights out about 4 times, they come out in just a minute or 2 with only 2 screws
Yep. Take off the front wheels and inner fender well. There is a box the lights are housed in. You need a special tool to take the screws out. The bulb is in there. Take it out, put in new one. Put everything back together. Or pay a shop $150 and replace both at the same time.
So did you pull the power for the winch from under the steering wheel/dash area inside or from the power solenoid under the hood? I didn’t see anything running from your battery.
Now can we address that got dam dinging??
You sir are a GENIUS. You saved me time and money. Garage wanted 200 with parts to charge it out. Parts cost me 24 and took me about 15 mins. AFTER watching you video
can you make a step by step? or did u just cut the wire from the top of the cluster and move it down?
He took a separate wire, stripped the ends. Jammed em in the relay and fuse. They end up feeding power to eachother. I just did it and it worked, I am so shocked. 10/10 hack
The repair cost to properly fix the cluster is reasonable. I'm assuming that bypassing the accessory delay relay only keeps the radio and power windows going, but the cluster itself still powers down? Does the radio shut off with key-off?
Youre awesome !!!! Went ahead and subscribed anyways 😀
Thank you
You are a genius - simple and fast.
Thank you!
Mine needs fixed also, I have watched several of these videos and can't figure out why in every video I watched everyone was avoiding pulling the headlights by cutting them, I had my taillights out about 4 times, they come out in just a minute or 2 with only 2 screws
Hello, good video, do you know , how i can to change the bulb (front lights) for Cadillac srx 2008 ths
Yep. Take off the front wheels and inner fender well. There is a box the lights are housed in. You need a special tool to take the screws out. The bulb is in there. Take it out, put in new one. Put everything back together. Or pay a shop $150 and replace both at the same time.
THANK YOU! saved me tons of time and it worked perfect
Good video. I have a 2019 with a winch, but the winch cable has been pulled into the spool too much and I cannot get it to release out. Any thoughts?
Went from a job I was dreading to a in and out chore! Thanks!
So did you pull the power for the winch from under the steering wheel/dash area inside or from the power solenoid under the hood? I didn’t see anything running from your battery.
My brother!!...The EPITOME of working smarter vs working harder!
How do u like the 2 piece windshield? I'm looking to buy a full windshield but I want wind also. Does it do good during trailering?
It’s a really good low budget windshield, but the rain does come through the cracks.