![Tony Fleming](/img/default-banner.jpg)
- 176
- 178 584
Tony Fleming
United States
Registrace 5. 09. 2013
Repairs of anything, Arduino stuff, Oscilloscopes like Tektronix fix, Digital Stuff, weird videos from my attempts to fix stuff....
My videos are not edited, feel free to skip boring parts!
Thank you for seeing my videos!
My videos are not edited, feel free to skip boring parts!
Thank you for seeing my videos!
Do you need 3D printed hand? Please contact me if you can make it to Lincoln, NE!
I can print and assemble 3D printed hand and I'm looking for people who need a prosthetic hand. If I make you a hand, it is for materials only, usually $60 that includes the parts I can't manufacture. I'm just trying to help, that is all. Seeing someone with a new 3D printed hand is when I'll get paid!
Please contact me by replying here with an a email address or phone number, so we can setup a meeting.
Please contact me by replying here with an a email address or phone number, so we can setup a meeting.
zhlédnutí: 67
Video
Printed on Bambu X1C - Engine Model Components Kit-005! It looks like a Harley motor!
zhlédnutí 44Před 19 hodinami
It took 2 days of printing and couple hrs assembly, on my X1C Bambu printer. Looks fantastic! And you can see inside the engine including pistons! Don't know if other printers, made by other manufactures, can download and print this model. Here are some videos, where you can see assembly.... and where to purchase the kit. czcams.com/video/6hGced_aZto/video.html us.store.bambulab.com/products/en...
Prosthetic Hand & I need you to tell me where I can find kids who need a prosthetic hand!
zhlédnutí 43Před dnem
I'm looking for information on where to find the kids that need a prosthetic hand! If you have an idea or know someone who needs a prosthetic hand, please let me know! Any information would be greatly appreciated! I will donate my time and equipment to create a prosthetic hand, based on specific need 4 the child. The only cost will be the parts or kit that has all the rubberized parts I can't m...
What happen to my previous video??? Play this video to find out!
zhlédnutí 6Před 14 dny
If you play this video: czcams.com/video/ZeFL3Zefd2c/video.html You will see what I turned it into!
LASER CUT IRIS BOX and how to put it together - revision!
zhlédnutí 52Před 14 dny
I'm uploading this video not because it works, but because it doesn't work and why. Download this from: www.thingiverse.com/thing:2704046 REVISION: Please go here and your Iris Box will work! : www.instructables.com/Carters-Lasercut-Iris-Box-V2/ What happen to this project? I made something new with it: czcams.com/video/7TLr2IT-g2M/video.html
Bambu X1C prints - it is the best 3D printer ever!!!
zhlédnutí 1,3KPřed 14 dny
Several prints from my newest 3D printer. By far it is the best 3D printer I ever seen or now own! The accuracy and speed it is an awesome printer!
How to solve KHUN PHAN puzzle
zhlédnutí 16Před 21 dnem
I have this puzzle for sometimes but I don't remember making a video about it. So here is how to solve this nice puzzle. You can also download it here: cults3d.com/en/3d-model/game/khun-phaen-puzzle More info here: tingtonggames.de/index.php/en/solutions-rules/2d-puzzle-solutions/ttp-001-l-khun-pan-large-the-solution-for-the-escape-puzzle Have fun!
Tesseract cube decoration printed on Bambu X1C
zhlédnutí 81Před 28 dny
The last attempt looks the best, but it isn't perfect. I hope someone will give me a hint how to make it perfect! I used support on first two prints, and no support on the last one. The Bambu Studio never asked for support! I also left to front glass door open, but on the previous 2 attempts the front glass was closed. Download it from here: www.thingiverse.com/thing:6683756
Great spool adapter for small spools to a regular size, like for my AMS, on my Bambu X1C. Under $2.!
zhlédnutí 65Před 28 dny
Just purchased Sunday one of these adapters that work well for my needs! I'm printing a second set, since I'll need at least 2 of these! Get it here: cults3d.com/en/3d-model/tool/small-spool-adapter
Marble Machine that can be mounted on the wall!
zhlédnutí 49Před měsícem
OK, last Marble Machine for today! Download here: cults3d.com/en/3d-model/art/the-wall-mounted-marble-coaster
AMAZING gears in color, changing shapes!
zhlédnutí 61Před měsícem
You can download this here: makerworld.com/en/models/523227#profileId-439912
Astronaut Golfer by my Bambu X1C printer!
zhlédnutí 41Před měsícem
I'm not sure if this is one that I had to purchase the STL files, sorry. It is 6 parts put together, just by pressing the parts into each other. No glue needed or screws.... just the parts. Download here: cults3d.com/en/3d-model/game/astronaute-golfeur
Marble machine printed on my Bambu X1C printer!
zhlédnutí 404Před měsícem
I love Marble Machines, so does my new printer X1C from Bambu! The colors, quality and speed is just out of this world! If I had to buy 3D printer, it would be Bambu X1C!!! Download: cults3d.com/en/3d-model/art/the-gravity-well
Marble machine that has interchangeable on the receiving end.
zhlédnutí 11Před měsícem
I had this one for sometimes, but this is the first time I swapped the receiving end.
Puzzles and tolerance test for my 3D printer.
zhlédnutí 71Před měsícem
I love this Impossible Puzzle! You can download it here: www.thingiverse.com/thing:6542259 It is just one part, to make the puzzle work, print 4 of them and the puzzle is to assemble and than take it apart! The tolerance test STL file can be purchased here: makersmuse.gumroad.com/l/OxKwn He is a fantastic guy who has videos how to .... with 3D printers.
Bambu X1C printer - fantastic results! I'm having so much fun with this printer!
zhlédnutí 339Před měsícem
Bambu X1C printer - fantastic results! I'm having so much fun with this printer!
First experience with Bambu X1C and samples that I printed.
zhlédnutí 503Před měsícem
First experience with Bambu X1C and samples that I printed.
Self Driving 4WD with Arduino Uno and Motor Driver Shield! Easy to make with all the files U need.
zhlédnutí 94Před 2 měsíci
Self Driving 4WD with Arduino Uno and Motor Driver Shield! Easy to make with all the files U need.
Expand your Motor Driver Module - Shield by soldering extra headers!
zhlédnutí 25Před 2 měsíci
Expand your Motor Driver Module - Shield by soldering extra headers!
COKOINO ROBOT ckk0014. Video, how to connect WIFI to this robot without downloading WIFI scanner
zhlédnutí 42Před 2 měsíci
COKOINO ROBOT ckk0014. Video, how to connect WIFI to this robot without downloading WIFI scanner
ELEGOO TUMBLLER ROBOT - THE BEST SELF BALANCING ROBOT !!!
zhlédnutí 61Před 2 měsíci
ELEGOO TUMBLLER ROBOT - THE BEST SELF BALANCING ROBOT !!!
MECANUM WHEEL CAR SPINNING ON A DIME!
zhlédnutí 142Před 2 měsíci
MECANUM WHEEL CAR SPINNING ON A DIME!
MakeShift had a Robot Competition and you can see more: https://www.facebook.com/makeshiftlincoln.
zhlédnutí 28Před 3 měsíci
MakeShift had a Robot Competition and you can see more: makeshiftlincoln.
COKOINO CKK0014 and driving with WIFI on my phone.
zhlédnutí 122Před 3 měsíci
COKOINO CKK0014 and driving with WIFI on my phone.
Step by step how to control COKOINO robot with your phone!
zhlédnutí 18Před 3 měsíci
Step by step how to control COKOINO robot with your phone!
How to install and run Cokoino-CKK0014 WiFi APK !
zhlédnutí 42Před 3 měsíci
How to install and run Cokoino-CKK0014 WiFi APK !
COKOINO ROBOT ckk0014. The best $50.00 robot!!!
zhlédnutí 99Před 3 měsíci
COKOINO ROBOT ckk0014. The best $50.00 robot!!!
Self Balancing Robot ZYC0049 from Aliexpress
zhlédnutí 120Před 4 měsíci
Self Balancing Robot ZYC0049 from Aliexpress
2WD Robot with many sensors a KIT from Amazon. By far the nicest KIT I've put together!
zhlédnutí 161Před 4 měsíci
2WD Robot with many sensors a KIT from Amazon. By far the nicest KIT I've put together!
hi mate can i use this device for my ultra capacitor bank rating 64 volts 125 farad with EHS of 9.6 mohms.
Voltage:10-1000V Quick Discharge:(100U/400V, ≈5S)
Sir i need a circuit diagram for 1 coil
Can u reply quickly plzz i am making this project for exhibition and i need your guidance
Go see my video here: czcams.com/video/Qvo9CcLnl5Y/video.html
overpriced and the build plate is to small. i've had 5 ender 3 pro's, a ender 3 v2, 2 xyz davinci 1.0a's, and my currant printers are 2 elegoo neptune 3 max's. i can buy 3 elegoo neptune 3 max's for the same price as 1 bambu printer. the bambu prints do the exact same thing as every other fdm printer. also the filament changing machine is super loud.
Not everyone has needs like yours, based on all the printers you had and have. But for the money, my Bambu X1C is the perfect printer, and I'm very happy with it. None of my other printers can do what my Bambu printer does in resolution, quality, strength, speed .... and simplicity is included! I'm not thinking that my choices are perfect for everyone! I'm just telling my story and leaving peoples decisions on their shoulder. I wish you a great day!
shout out man, good work, this is great stuff
What's the name of the port on the speaker?
If you hold the board so you are looking at the PCB and the ESP32 chip is facing to the left side, then the SPEAK(er) connector, the smallest one that has 2 pins only, is on the bottom. Hope that answers your question.
@@tonysfun That does! I have another question, If I connect my ESP32-2432S028R with a phone charger to a home common socket would it work?
@@tonysfun Keep up with the good work!!
@@koliller I do not know. I had my friend Hari write the program, since I'm not a programmer, sorry. Hope you can find answer by going to the GITHUB and research some of the places you can find there.
I would say its the second best end user fdm 3d printer, best would go to the prusia xl with 5 toolheads witch obviously is more expensive. Also any Powder laser printer is way way way better but obviously not for end users.
I agree. For the money also X1C is a great deal!
@@tonysfun its a over priced desktop printer. bambu has zero large scale printers on the market in 2024.
@@honda-s2k It isn't for everyone, that's for sure! I have 2 other printers and one of them is CR Ender 5 PLUS. I found out that a huge majority of my prints are smaller than the bed on Bambu. It is also enclosed and it is reliable! To me, my Bambu X1C is a perfect printer and it is fast, so I can actually make stuff and not loose interest before my other printers slowly print stuff. You have a great day!
Thanks or taking the time to explain how to put them together!
0:19 wrong The shunts (by norm insulated laminated tabs) are not there to limit current across the output but rather to make the whole transformer operate more efficiently when under load by reducing (if not completly) eddy current losses. So ideally if possible you wuld leave them in there, aslo fow spot welders of this sort (I'm currently working on one) One would need to have a minium of 3 to 5 turns for maximum performance and the wire gauge used should between 25 to 35mm2 . Good luck I hope you succeed and find my comment useful for the future.
Thank you for that information! Based on research I did, they took the shunts out, so I used their visdome. I have it working, but I agree it needs one or 1.5 more turns. The cable is so thick, that I wounded in there as much as I could. No room even for a half a turn.
Thanks for this. I just got one of these and an Anker 240W PD 3.1 charger so I can properly test laptops that come in for repair with charging/power issues. The tester seems to have a few features I don't know yet so this video is useful! Cheers.
I'm glad that this video helped you. I had, before I retired, a computer business and I wish I had something like this many years ago! One item I have now, but did not have, until almost end of my business, is a power loader tester, my model is RIGOL DL3021A, but you can find others or a better model. RIGOL is a great brand and they have a supper service, compared to other reasonably priced equipments. If you get any deeper in repairs, some good brand Oscilloscope (I have 2 and 4 channel) so you can see what is happening in the world of microseconds... ha ha ha The youtube is full of great repair videos and you could also ask for help, I've had good luck with that also. Lastly, having a very MultiMeter kike Fluke 289 is great for testing, but if you buy the software with the USB kit, you can connect it to a computer and do more troubleshooting PC's. 289 has also built in a program, where you can watch a power supply over a long period of time, and it creates a report on what was happening in past several hours or a day with a power delivery or power fluctuation! Have a great day and good luck with your business!
@@tonysfun thanks, I appreciate it and also thanks for the in-depth response!
I had to purchase the STL files, that is why I don't have for you the shortcut to download for yourselves.
Напишите. ЕСть ли новая прошивка для данного прибора?
Don't know, sorry. Have a great day!
@@tonysfun Спасибо. Понятно. Я не могу найти. Если будет, то напиши.
@@alexpol1958 The updates for these kind of meters aren't being made. What I do, every other year I buy one of these and I'll keep the old version and or give it to someone..... Have a great day!
Remember the rule, the USB connector always goes in on the third attempt 🤔🤓
You probably messed up when you pushed the rocker while pulling the tester out because I am sure that both results should be a lot higher, somewhere between 90 and 200 mOhm
Not the way I've tested the cables. I practice with the USB tester and I went thru many, many cables so I knew what cable was reading before I made the video. You can make a video demonstrating your view and if I can repeat your findings here, I'll give you the credit you deserve. (I hope this isn't coming out as defensive gesture, because I'm not vested in anything I do or make or test...). have a great weekend!
@tonysfun I have been testing usb cables for years now with AVHzY, Witrn, Power-Z and Fnirsi testers and no matter how expensive, I never had one with lower than 60 mOhm. There are countless videos on CZcams, you will not find another one with such low resistance.
@@FransvandeKamp Same here and my son who is also big in testing.... was surprised that his most expensive USB cables 100W was not his best cable! Sometimes the way the wires are shielded and connected - I'm sure you know that there are many standards and even badly made cables .... - so the results can be far apart. I can't solve your experience and results you've measured, but I can tell you that my son (who is in Czech Republic and is in computers and electronics repairs...., and who is dealing with government and very large companies....) did the testing together with me over WhatsApp. I know my son well and he knows me, so we do a lots of learning and testing..... We would never purchase or recommend cables that aren't safe and the best we can get. Inexpensive cables are good for individuals but not for people who depend on them, in this case, great USB cables. What did you measured as the lowest resistence values? The results in the best cables you have tested? Have you tried to use exactly the same setup, like in my video? If you like we can use the Internet to communicate with each other and run some tests - you can tell me how you did it and I'll try to duplicate it here. What do you say? Send me an email to blbcisem@gmail.com if you like and I'll reply to you with details. Have a great weekend!
@tonysfun Well the resistance of copper wire per meter is: awg 20 - 33 mOhm awg 22 - 52 mOhm awg 24 - 84 mOhm Typical resistance of a usb connector is 30 mOhm All of this you can check online. So unless you cable is made of some yet unknown material with next to zero resistance, you can see that your cable can never have 11 mOhm resistance.
I hope to have as much fun as you are lol, and I think I will! Those look great! Wonderful job, and thanks for showing!
Glad you like my 3D prints. Just started my printer again and later I'll print a box for spare parts and tools. In my past 3D printing, some of my prints took almost 3 days! The longest print on X1C printer was under 12 hrs. I'll post more videos later on, so please come back again. Did you see some of my other videos? Thank you and have a great day!
@tonysfun yes I have, I also subscribed and did all notifications lol so hopefully yt will actually let me know when you upload 🤦
@@alphaomegasurvivalsupply6548 Thank you very much! As you can see from my other videos is that when get motivated and or get something new, I have hard time to do something else.... ha ha ha But I have several projects, including printing storage boxes for the extra stuff and tools. Than I'll try this big and complicated marble machine that I found, but not sooner than my large order of filament! I'm for now buying filament from Bambu, but www.matterhackers.com/s/store?q=bambu has filament and refills, so as soon I'll need filament, it is gonna be a refill - saving about $3 or so! Have a great day!
@tonysfun that sounds awesome! You have a great day as well!
I just ordered a P1S with AMS for my first printer, and I can't wait for it to get here! I've wanted one for a while now and finally took the leap 🤣.
Thank you very much for your comment, and I'm happy for you, because it is a great printer!!! We can help each other and or share our experiences! I'm gonna upload a video I just finished, so check back in 1/2 Hr. It shows how fantastic results you can achieve! Have a great day!
@tonysfun going to look now 🤣 and thank you very much!
@@alphaomegasurvivalsupply6548 Let me know when you get yours! I'm very happy for you!
Beautiful prints. Gorgeous vases!
It would have been better if you had included showing how the device will actually give the watt rating of the cable [PD 100W, for example] as well. Knowing whether a cable is rated for 140W or 100W is arguably more important than just knowing if a cable is overly resistive. Also, please make another video where you explain how to accurately measure power bank capacity by using the device, calulating to Wh and compensating from the nominal 3.7V battery to the 5V usb current. There arent any good videos that are solely a tutorial on calculating power bank capacity with the FNIRSI FNB58.
I don't know when I'll have time to record another video 4 U. But as the video stated, the 100W cable was the best cable I have. For my needs this FNB58 does exactly what I purchased it for. It does much more, but I move quickly to new ideas and I don't have any cable that is 140W, sorry. Why don't you buy this useful tool and make a video, please send me where the video is, so I can learn something from you. FNB58 is on sale: fnirsistore.com/product/fnirsi-fnb58-usb-tester-voltmeter-ammeter/ Even less here: www.amazon.com/Voltmeter-Ammeter-Protocol-Trigger-Voltage/dp/B0CNXJBLHP/ref=sr_1_7?crid=P2RV9BKFME5P&dib=eyJ2IjoiMSJ9.rqIXBILoZAtkrJ-yUk1UgCgq-wB7vsgGWgrmqbmPpGdRRQ33TqH7CqtlmM4VhF-9JwCW4EltTb6J9_l7Ft119b7w508Lmj8VDx0J5lFQqS6z2_D45ORLGjxv0CuNl7AH0352FFlvsqaSoNGe53hCgQfIQaHQyFZBCe-uzrxvAGfdGbpNtUO5QCoIkWFoy6yh.F9fKxDPHwn6Qfcd3InzELeYono85nIi7Fe7IW8XMwKo&dib_tag=se&keywords=FNIRSI+FNB58+USB&qid=1719327635&sprefix=fnirsi+fnb58+usb%2Caps%2C251&sr=8-7 You have a great day!
just in case if anybody sees this comment and might benefit from this i found multiple vidoes about this topic this is for A to type C : czcams.com/video/nkp-A8vuI8s/video.html and there is also a way to check type C to type C cable also : czcams.com/video/pVAIrZrZYu8/video.html
Thanks for this. It will come in useful in my repair shop.
great video .. i gotta ask tough .. why is it necessary to put a resistor on the right side ? there has to be a simpler way than this right?
My son found this part somewhere on the net and we plaid with the bad "how to" and found that the best calibration was to use a resistor between 25 to 100 Ohms.
just in case if anybody sees this comment and might benefit from this i found multiple videos about this topic this is for A to type C : czcams.com/video/nkp-A8vuI8s/video.html and there is also a way to check type C to type C cable also : czcams.com/video/pVAIrZrZYu8/video.html by the way didn't you say it was an 8 ohm resistor the one that you chose in this video ? and what was the gauge of the wire that you soldered to the usb connector? again great video and thank you for the quick reply !!
I'm looking for a working APP for my phone that would operate this robot! I've downloaded many other versions - same looking robots sold under other brand names - but I can't find any apps that work. I get to connect just fine, but none of the buttons do anything! If any of you out there have a solution, please let me know. Thanks!
Would have been nice to see the other side of the pcb also.
Excellent Tony , I liked really. Show it how runs in the terrain . . .
I'll try to make a video later on.
All your videos are bullshit. You don't keep track of focus and blame it on your camera?! Who is the boss in your place?
Great job Tony!
Hello, I have a problem with the LCR T7, when I turn it on, it gives me zenor 13.6v without connecting anything to it.
Did you charge the LCR? Also, try to put a 1Kohm resistor before you turn LCR on?
Hello, I have a problem with the T7, when I turn it on, it gives me zenor 13.6v without connecting anything to it.
Charge the LCR first and put 1Kohm resistor between pins 1 and 2, than turn the LCR on. And the same after 1Kohm between pins 2 and 3 and also pins 1 and 3.
@@tonysfun Thank you, my friend. I will try tomorrow and update you on everything
@@paris9786 Sounds good.
Hello, I tried the experiment and it is as follows. Firstly, 1-2 gave me the resistance value of 1K. Secondly, 2-3 gave me the zener AK. Thirdly, 1-3 gave me the zener AK. How can I solve this problem?
@@paris9786 Did you measure something like a capacitor and your problems started right after that? If yes, you forgot to completely discharge the capacitor! For that, you have no fix and just buy a new one. Please also see this video, before you buy something else: czcams.com/video/q4P-Bedhkz4/video.html&ab_channel=TonyFleming
I tried releasing the clips which is successful BUT the case won't come apart as there's a black, oval object that is preventing the case from removing completely. It will not pull off either. Very tricky to work out.
Try to see all 4 videos. You might find solution there. See my comments below.
@@tonysfun Hey, I tried but cannot see in any of your videos how you remove the bottom from the top.
@@LandersWorkshop I know that the videos are several years ago, so I don't remember all the details, but there is enough info, so watch them all, because I wasn't at the time very organize in my videos - sorry.
@@tonysfun Unfortunately this part that is on mine is not on yours so I think it is a slightly different version.
@@LandersWorkshop Sorry, but if I can speculate, look for a screw or one more clip? I remember that sometimes the clips you pushed to open snap back to a locked position!? What is the model number? Is it newer model?
Excelente video. Gracias por compartir.
Mine turns on when connected to the battery and connect K to the negative but after a few seconds it shuts off
You need to put a small pushbutton switch, like in my video, because the "K" on the PCB is looking for 1CLICK or 2 CLICKS! If you wire the K to MINUS it will get confused! Hope that you can make it work!
Thanks, Tony! Your creations are always very neat and clean. I'm still wishing for a laser cutter of my own.
Hi, can you write down resistors value on the board? They all must have the same value.
hola me podrías ayudar con la resistencia R2, se me ah perdido en una caída y le falta la R2 :(, quisiera saber el código para reemplazarlo. estaría muy agradecido :)
Sorry do not know your language. Try to translate to English.
The CERAMIC resistor is 10W 8 ohms. I hope that is what you needed. Have a great day.
Ваш тестер не калибруется перемычкой у вас подделка на чипе М644 . Который дешовая копия не начто неспособна.
What should a good heating element read and what should a bad one read on a multimeter ?
I cloned 200 go to 500 go takes 5 mins but from 500 to 1tb take forever Is that normal?
Yes, it is a very slow duplicator!
That looks like fun Tony. Now if we can do it in 3D Printing i'll make one.
Join a Maker's Club or find a friend with laser cutter and download the files. Or you can design the box in a free version using Fusion 360.
disassembled this tester. The microcontroller is a Chinese clone of Atmega 328 / LGT8F328.ESR, it shows sometimes no. And that’s not correct. Schottky diodes are identified as a resistor. Maybe the firmware is normal, but the controller is crap. It needs to be replaced with an Atmega 328
@@tonysfun I only found your video on CZcams. There are no firmware or circuit diagrams for this tester. I haven’t changed the controller yet. I’m just examining the board Maybe you have an original controller on the board, that’s why it works normally. I don’t have an inscription on the controller, it’s worn out. I'll try to change the controller, maybe I can fix it so it works correctly My translation may not be very good. I’m just from Ukraine
I understand your English just fine. I hope your country end the war and Rusha leaves! I do not know if my tester has the original or a copy board, but in China they copy everything including from other China manufactures and just rename it.... I'm not gonna disassemble my tester to find out what board is in mine. What is wrong with your tester?
@@tonysfun I bought this. This meter MTT-V1 detects a 3.3V Zener diode as two diodes. It detects an inductor but overestimates the value 2-3 times. This is not an ATMega-based tester,
Do you know where we can purchase this heating element at ? I’ve been trying to find one similar but can’t seem to find any online
4.5 billion years of spinning and they asked why? I love how this all ended. Im glad everyone got to see the true meaning of a Halo 😇 (Solar System).
just ordered myself one. cheaper and more capable than the "C2C caberQU". thanks!!
What tester did you get? Have you seen FNISRI? czcams.com/video/k9R5IX4Mkes/video.html&ab_channel=TonyFleming
@@tonysfunnah too expensive 4 my needs.. got the treedix one for data pins, also have type-c volt/ampere meter for the charging test. covers most of my use cases. anyway thanks for the heads up
Появилась ли новая прошивка? Firmware????
Sorry, but I can't read your question. If you are asking how to update the firmware? I do not know how to do that.
I did not know you had a channel. Cool video!
Thank you for the video, Is there a pre-made consists load, I can buy from Aliexpress? Thank you
Nothing to buy but a resistor as seen in the video.
Here is where the SCHEMA is at: czcams.com/video/qfmv-rHK_RU/video.html Use ScreenShot or PRT SCN button on your keyboard to copy the screen and paste it into word or other editor, print it and there is your schema.
do you have the circuit for sale
Hello. Could you write me link fo Android and Windows app for this meter? On official website i can't find app. Thanks
This is the website: drive.google.com/drive/folders/1hOv76usYlKQwLIst0oDn_zbYuPlt8iEE
@@tonysfun your Google drive is closed for me
@@medeo9813 I have no problem downloading all of the software and the manual.
@@tonysfun Got it. Appreciate
Kann der FNB58 mit aktueller Firmware nur 120 Watt? In den Spezifikationen steht maximal 120 Watt! Das schwächste PD3.1 Ladegerät kann 140 Watt! PD3.1 selbst geht bis 240 Watt.
Teste häufig über 140W mit original FW ohne Probleme
I just bought this tester and wanted to test a "26800mah" power bank I bought from Amazon. I don't quite understand how to read the results that's right in front of me. Lol. Is it a 9900mAh or 19600mAH capacity? Screen says the following: Battery CAP Calculation Group: 01 Time: 0 days 14:36:41 CAP: 9.92364 Ah NRG: 80.5495 Wh BAT Vol: 3.7V Conv Eff: 90% Results: 19.5931 Ah Thanks!
Good question. I do not know the answer. I tried to recreate what you did, but I'm not getting the same results you have.
Thanks so much Tony for this very helpful video. All the best
All the best also for you and your family.