Mines 3ed clip less then a 1/2 ON AIR DOING 36 with 41 dose that sounds right stills whats to sceem hi whin poll in cluch do i need to go biger on air and mine???
Spark plugs fuel flow dry jetting Magneto cutting out CDI cutting out there's a number of things that could be the audio wasn't good enough for me to tell anything and generally I can't tell anything unless I'm on the bike myself and I don't want you doing any parts chasing first thing I would do change the Magneto
Thanks for the long ride along brother I didn't hear it cutting out at wot just when you were coming to a stop sounded like it wanted to stall on you. When we're you going wot I only seen you get up to 33 mph mine is just getting going at that point and if I wot mine when we're doing 30 mph you'll be going around 50 mph quickly but I didn't here it cutting out ride safe brother
Hey bro this Ken what's up brother yes I got the real vm 20 I started out with the knock off pipe just would not hit but now that I put the vm on when the pipe hits you better be holding on omg
Why do you still have stock phantom Motor why don't you get a smolik performance chopped cylinder head from smolik performance and put a racing performance head on it
She's looking SWEET did you get the vm20 carburetor from Gomax as well looks awesome brother I'll be watching for your ride video I told you Gomax had a great exhust mz65 minaralli expansion chamber pipe sounds awesome like a dirt bike ride safe brother
And yes it feels balanced I got a hold of them and they assured me that they are indeed balanced I was only doing about 35 but they're was no vibration they said they balance them with out drilling holes
@@Putamotoronit1971 Cool beans brother cause I didn't want to have to take it apart cause I have a balanced crank not being used I just didn't want to break the engine down to swap them out. So what do you think I like the take off power on my phantom but I like the speed and power when you get on the minaralli I'm glad your enjoying it ride safe brother
Cool beans Ken glad you got her going again thanks for the shout out appreciat it yeah its not balanced on the mz65 pipe you can get a good 1 from Gomax is where I got mine but I heard that mz Miami sells them as well direct bolt on Gomax even sells the belly pipe version glad your phantom is running again I know you are to ride safe brother
Hey bro don't know but I could see that it only had two holes on the crank and I've only had it up to maybe 6 grand im waiting on a pipe from gomax and a bigger cooling head I'm sure I'm going to have to balance the crank because I will be moving up to the Athena
Ken she was running great what happened I don't bring tools neither but you took it in stride was even singing lol your good guy brother I hope it was something simple
Ken what do you think about the minaralli from California engines reason I'm asking because my son Bought me one for Father's day and I have 1 all ready but from Gomax the engine came just like yours but I noticed that the crank wasn't balanced all the ports were smaller and not cleaned up when I asked him about it just ignored me the only plus point of this engine is it comes with 8mm studs other than that Gomax lot better quality and it's only 19 bucks more but your getting a vm20 carburetor and air filter with It I asked someone else about there's and they said it vibrated so bad it cracked the frame of his bicycle was seeing if you were experiencing some of the same thing which means crank is not balanced I recognized it because the crank only had 2 holes on each side a balanced crank has 4 holes on each side
Don't know yet haven't went that fast waiting on a pipe from gomax there was only two holes in the crank so I'm sure I will have to balance because I will be getting the Athena
what happened? choked?
Set up looking good. Carb, carb...and or electrical. Thanks for the ride.
Looks clean. Thanks for sharing.
Did you try no air filter
Mines 3ed clip less then a 1/2 ON AIR DOING 36 with 41 dose that sounds right stills whats to sceem hi whin poll in cluch do i need to go biger on air and mine???
I love watch your videos, your entertainin & can learn from your videos!! Ride 🚲 On Kenny & keep the videos coming buddy!! 🤟
Spark plugs fuel flow dry jetting Magneto cutting out CDI cutting out there's a number of things that could be the audio wasn't good enough for me to tell anything and generally I can't tell anything unless I'm on the bike myself and I don't want you doing any parts chasing first thing I would do change the Magneto
Hey Kev thanks man it was my spark plug boot the inners were coming loose thanks bro now I can open her up and really see what's she's got
Thanks for the long ride along brother I didn't hear it cutting out at wot just when you were coming to a stop sounded like it wanted to stall on you. When we're you going wot I only seen you get up to 33 mph mine is just getting going at that point and if I wot mine when we're doing 30 mph you'll be going around 50 mph quickly but I didn't here it cutting out ride safe brother
You sound girgly girgly
Heck yeah bro can't wait to hear it
Bike looks awesome
Your good rider bro good control that phantom goes fast
It definitely is a nice build brother. Keep it on two wheels🤙🏻 🚴🏻♂️💨✨ ✨🇺🇲✨✝️🙏🏻✝️✨🇺🇲✨
Runs great 😃👍
nice brother👍👍👍
Sweet I told you you'd like the minaralli glad it's working out for you ride safe brother
Nice and working from too rich going leaner is the way to go 👍 no damage
Hey bro this Ken what's up brother yes I got the real vm 20 I started out with the knock off pipe just would not hit but now that I put the vm on when the pipe hits you better be holding on omg
Right on Ken. Keep going. Thanks for the ride.
Why do you still have stock phantom Motor why don't you get a smolik performance chopped cylinder head from smolik performance and put a racing performance head on it
Look it up menace 85 cylinder head also make sure you get caber piston rings 1.2mm x52 mm is what I did to my phantom Motor
been there quite a few times. i bet ya'll would love to see my fat ass do the walk of shame, lol. Next time i'ma call me an uber with a truck.
I like the chain around the gas cap that’s creative
She's looking SWEET did you get the vm20 carburetor from Gomax as well looks awesome brother I'll be watching for your ride video I told you Gomax had a great exhust mz65 minaralli expansion chamber pipe sounds awesome like a dirt bike ride safe brother
💪👀👍
She sounds awesome brother what happened when you were cutting out and did it feel like it's a balanced crank?
My spark plug boot was loose
And yes it feels balanced I got a hold of them and they assured me that they are indeed balanced I was only doing about 35 but they're was no vibration they said they balance them with out drilling holes
@@Putamotoronit1971 Cool beans brother cause I didn't want to have to take it apart cause I have a balanced crank not being used I just didn't want to break the engine down to swap them out. So what do you think I like the take off power on my phantom but I like the speed and power when you get on the minaralli I'm glad your enjoying it ride safe brother
👍👍
Any problems with your phantom?
Lol😊
Nice to see that running again 😊now leave it alone for a while and just ride , love ya Dad
She sounds awesome brother purrs like a kitten idling great job with it
Cool beans Ken glad you got her going again thanks for the shout out appreciat it yeah its not balanced on the mz65 pipe you can get a good 1 from Gomax is where I got mine but I heard that mz Miami sells them as well direct bolt on Gomax even sells the belly pipe version glad your phantom is running again I know you are to ride safe brother
👌👀👍
Got the phantom going again
Hey bro don't know but I could see that it only had two holes on the crank and I've only had it up to maybe 6 grand im waiting on a pipe from gomax and a bigger cooling head I'm sure I'm going to have to balance the crank because I will be moving up to the Athena
Ken she was running great what happened I don't bring tools neither but you took it in stride was even singing lol your good guy brother I hope it was something simple
Hey Now
I love ur vids bro keep up the good work . One day u will be the most popular.youtuber i now it keep up the good work bro.
Ken what do you think about the minaralli from California engines reason I'm asking because my son Bought me one for Father's day and I have 1 all ready but from Gomax the engine came just like yours but I noticed that the crank wasn't balanced all the ports were smaller and not cleaned up when I asked him about it just ignored me the only plus point of this engine is it comes with 8mm studs other than that Gomax lot better quality and it's only 19 bucks more but your getting a vm20 carburetor and air filter with It I asked someone else about there's and they said it vibrated so bad it cracked the frame of his bicycle was seeing if you were experiencing some of the same thing which means crank is not balanced I recognized it because the crank only had 2 holes on each side a balanced crank has 4 holes on each side
Don't know yet haven't went that fast waiting on a pipe from gomax there was only two holes in the crank so I'm sure I will have to balance because I will be getting the Athena
Chill on the go-go
Chill on the gogo
Ride 🚲 On, thanks for the cruise
Don't think too hard...and restrict your carburetor by cutting your carburetor...too long it will taint and disturb your return
Right on
Why revving so high at start? Thanks for the ride.
✌✌👀👀👍👍
Looking good. Sad that the saw didn't made it. We will be watching, a Minarelli is a Minarelli after all. Thanks for sharing.
👀👀🔥
✌✌👀👀👌👌
Congratulations on the 100 subscription may you get lots more
Well happy 100 ken may you get many more.😊