Video

Senior

@@Denden-mx9gl check if you're using a custom IR, make sure it's loaded in the position marked on the User IR spot.

@@Denden-mx9gl You can join the community with the link in the description if that isn't the issue so u can share screenshots of what you see for better assistance

@@Denden-mx9gl Does the Valeton Software work normally? Sometimes if your USB-C cable is faulty, you might not get any audio output.

@@Denden-mx9gl Also make sure you assigned the right channel for your DAW recording 🎙️

@@calebcadainoo yes I have assigned the right input and channel for my DAW, it's weird I had to plug in a headset on the gp200 itself. But on the DAW and the gp200 app there's no sound.

Thanks a lot bro ♥️❤️ Massive appreciation for the support 🔥🎉

Big thanks @proximity0765 🙏

10,000% correct 🪂

My favorite Christian singer. Motown once recognized him as world's best trumpet player. I have seen him 6 times at local Churches dating back to 1985.

@@irishchopper9065 oh wow... amazing 🔥🔥

You checked like how I showed it in the video?

You're feeling the music 😉

You're feeling the music 😂

I don't have one yet. I record straight into the DAW without processing and use it in the videos

Try using a good USB-C cable and re-install the firmware. Watch any of the videos below 👇 to guide you. Firmware & Software Update ⚡️ Valeton GP200 czcams.com/video/M7nLVIDWScA/video.html Valeton Firmware & Software v1.5.0 Update czcams.com/video/NtANf1RuWjE/video.html

You're most welcome 🤗

Oh yes. It works with every DAW

Yes I use the Valeton GP200 as my sound card for my DAW to record

If your setup will accept multiple inputs of more than 1 you might have to get a sound card that can support your setup. Example: I record just my guitar 🎸 at a go In your case, if you will have let's say a band of 5 people where you would record guitar, bass, keys, drums, etc while they play together, a bigger soundcard will be the best for your case.

😂

Yes 1. Hammy (PRE & WAH Block) 2. Pitch (PRE Block) 3. P-Bend (PRE Block)

@@calebcadainoo thanks so much

im using a windows 10 pc and GP-200 Audio doesnt appear, as the drivers aren’t installed, but none of them work

@@lucarrr4811 install this and restart your PC bit.ly/Valeton-ASIO-Windows

@@lucarrr4811 you have to unzip the file before installation

@@calebcadainoo bro you are absolutely insane, thanks not only for answering me in so few minutes, but also for helping me out, well deserved subscription, thanks really❤️❤️❤️

@@lucarrr4811 you're welcome bro🤗 More videos coming

nevermiind found it later haha

Hahaha 😂

Obrigado 🤗

Awww thanks a lot bro much appreciated 🙌🙏

Can u explain further?

@@calebcadainoo sometime when I moved preset 1 to preset 2 suddenly the guitar sound disappeared and there was no signal in the valleton effect and guitar. It need to turn off and on again to normal. But sometime the problem occur again? Sorry for my bad english anyway

@@A_JimlySabda oh that issue. Which version of Valeton are you running? czcams.com/users/shortsrjw6kM5T9IQ?feature=share

@@calebcadainoo new version sir 1.5.2

@@A_JimlySabda wow that's strange. Which amps were u using in both presets?

You win comment of the week 😂😂

I try my best to explore as much as I can. You can join the community here: bit.ly/valetonwhatsappcommunity

Well I just got some 6 and 1/2-in monitors to run it through and a computer but I don't have it hooked up yet

@@Davidlovesmusic311 that sounds like an amazing setup in the making

I hope so. I'm a contractor so I work a lot so but I have the next 3 days off so I got some stuff to do put that computer desk together trying to get everything connected

You can assign it to a CTRL button When u press the CTRL button it can add the extra volume boost

@@calebcadainoo I tried that, but I don't know how to add volume, tried everything but is not working ☹️

@@moisesdiazmunoz4822 which Boost pedal and Amp did u use?

Why? Its way easier with the software

I'll make a separate video to show how

​@@billjoster1581Yes it's way way easier with the software. Especially when you need to load an IR, u can't do it without the software 🤗

Kindly join the group let me assist u better. bit.ly/valetonwhatsappcommunity

@@calebcadainoo enviei a solicitação estou aguardando aprovação

Okay ​@@andrearruda6751

It takes a lot of time and effort to properly craft a very good preset. Time is money

The best way to get some of these presets is to learn to create presets by ear yourself. A skill that doesn't come easy. ☺️

czcams.com/video/AbUboPTos-4/video.htmlsi=sS_1oY9PuUcrtUiT

No this has been there since the first release. I'm explaining what each effect does to make easier for beginners, intermediate and advanced users of the Valeton in Tone Creation. 🚀

By the way, Valeton released a new update today. They made some bug fixes. You can update your board with the new Firmware

@@calebcadainoo any idea what are the bugs they fixed on this recent update.

Not so sure yet. I'm yet to find out

With vocals, you have to connect: 1. Your microphone 🎤🎙️ to the INPUT Jack port 2. Choose a blank preset/turn off all effects in the signal chain czcams.com/users/shorts0BHvp-01bcw?feature=share 3. Connect the board to the computer via the USB-C cable. 4. If you are on Windows, install the ASIO driver of Valeton from their website by downloading and installing. 5. Set the channel you want to record your vocal. 6. Choose the mode as in either MONO or STEREO NB: Channels 1 - 4 will record exactly what comes through the INPUT the 5 - 6 will record everything on the DAW + the INPUT Signal

I've attached links to the manual. bit.ly/valetonmanual Watch this video to see where to find the other links for Firmware czcams.com/video/4Eamborf1bI/video.html I use virtual DAW

First you have to know the type of patch/preset you want to create either Clean, Overdrive or Distortion. 🚀 If clean, choose a clean-based amp eg. JC-120 or Dark Twin (Fender Twin). 1. Adjust the volume of the CAB 2. Set the knobs as u deem fit...the Bass, Mid and Treble 3. Add a Dynamic effect like Compressor in front of the amp if u deem it fit. czcams.com/users/shortsE9rqp8BnvrA?si=o7-EsLlbJm3-QPdl 4. Add Modulation effects like Chorus or Phaser after the CAB 5. Add Delay and Reverb 6. Save it with a Name And you wud have a patch/preset

Amps for Overdrive and Distortion EVH5150, SLO-100, Bogner RedV, etc

Gibson destroyed it because it said there were some defects on that specific model of guitar 🎸. They called back all of them and destroyed them.

You can try turning off and on the board. Also you have to click or press the PARA knob to enter menus

Olá, tem como resetar sem apertar no botão paramétrico, porque e justamente ele que está com defeito após a atualização, fiz um comentário em inglês aqui no seu vídeo.

​@@andrearruda6751 The reset option is under the *Global Button*

​@@andrearruda6751you need to press the Global button on the board itself then you use the PARA knob to scroll through the options and click to choose the options you want. You can join the WhatsApp community. So u can share pictures of what I mean so I better assist you. bit.ly/valetonwhatsappcommunity

Your board can do more than you think 🤗

My studio monitors came today. Sending the tascam back.

I prefer not to make a decision for you. But go through all the videos I have on the Valeton GP200 and see if it would be the best device for what you want to achieve 🤗

I am a rookie at digital so I think I'm going to return the tascam mixer and get my money back and use it on other things that I might need

Do you use other pedals besides what you what's inside the GP200 external pedals I should say?

I just ordered a few pedals but I haven't used any yet no

​@@Davidlovesmusic311 For me, the Valeton is all I use as my guitar effect

Sounds interesting

Do u think the tascam 12 was not needed, because I can return it for full refund. I've always used tube amps and sick of buying over priced pedals. I have a new Lenovo desktop icore 15

I don't even have the valet on go 200 connected yet. I ordered some kali 6.5 monitors. I also have a powered Laney left 112 cab

@@Davidlovesmusic311 The Valeton GP200 has basically everything you need. The only thing you may have to buy separately is a good Wah Pedal because the wah that comes with the GP200 isn't that great sounding.

@@Davidlovesmusic311 Watch this video I go into detail what just the PRE block comes with. czcams.com/video/WAjR5dyvTQ4/video.htmlsi=WrO_pNdEIKu1tag7

At this point I think I'm lost 😂 I would be glad if you could explain in simple terms what you mean.

@calebcadainoo okay. Use the tonex as a mini modeling amp. 3 channel. External controller for switching between preset banks and other stuff needed. The 4 ik multimedia gear x pedals. The x drive and such. These can be set up with their pre set options as various on and off pedal tones. The valeton works for always on pedals and entire chains of always on effects for various songs and such. Joyo zombie 2 mini head. The valeton I believe is one of the multi effects pedals with dual outs where one of the outs can have cab simulation always on and the other always off. Use both at once. Line switcher pedal like an AB pedal. Isp power amp. Attach to the guitar cab that's un powered. Harley benton verticle 2x12 as the normal guitar cab with the power amp. Line switcher there for the joyo as well. Meaning I can boost the 20w joyo by another 90w. Or have the tonex as a 90w amp without modeling or with going into the powered PA cab on the side. A full stack is 2 4x12 speaker cabs. My set up will be a mini stack. Dual 2x12 equivalents. Meaning stage sound is covered as well as direct to house via direct inject to sound guy. Or micing up either powered or unpowered cab. If a band mates rig isn't working. I can use the joyo plus the valeton by turning on the amps in the valeton. And let them use the tonex. Every x gear pedal gives me 3 button presses so a b c if I have the other 2 button controllers set up. Valeton with an external footswitch adds more options as well. Thousands of unique tones on the go. Using a makers board computer like a raspberry pi except a really powerful one called an udoo bolt v8 I can have under the board with the power supply for the other stuff. Using certain other pedals with all that makes it even more versatile and adds effects loops and options to switch the pedal routing and create more options. But joyo zombie 2 has a external channel foot switch. Add in the ab switches and the rest. I'll be able to do like high end modeling system level patches but even more versatile while also being able to trigger everything myself and still have stage volume. Recording writing and touring rig all in one pedal board. Zombie 2 is like 2 pounds. Isp stealth isn't heavy. I can physically attach those to the cab. Meaning carry 2 cabs. A pedal board and a few guitars at most and it's a whole touring rig that can fit inside a single travel case or broken up. Add in a strandberg or other small headless guitar. And half my rig is carry on and the stuff that isn't can be gotten quickly or suitable replacements. Using the actual pedal board platform itself. Gonna bolt all the external controllers to the front edge and sides not the top. Footswitch covers and toppers and the right pedal board design makes it easy to get to everything actual button heights will be different for each row. Wireless touch screen set up for the udoo bolt. Plus an entire interface added to the under side as well. Digitech drop pedal. Few other real pedals like a gate and comp. Line switcher stuff obviously. A single distortion pedal. Maybe an added tonex one. Anything the ik pedals can't do or the tonex one doesn't have enough controls for the valeton should work. Joyo and power amp and line switching makes it a full hybrid rig. Power amp and the rest also makes it like a more versatile Kemper while replacing amp and pedal board stuff you need aside from the Kemper. Fixes the slight issues with multi effects units. Makes it easy to create pre sets and patches on the go. And functions like most of 2 full rigs and can cover bass gear if needed. Plus has an interface under the board with a pc. Meaning recording side is handled easy. And every specific x gear pedal and tonex and valeton can all function as interfaces. Meaning even with 3 guitarists and a bass player I can still home brew some stuff. And in a few eq pedals at the right spots. Should be able to get any tone I want or so close you can't tell live. Have all the at hand functionality I want plus easy switching stuff around. Sound basically the same live on recorded. And more options then the fanciest analog pedal boards and amps at hand for less money. Plus ability to capture my own tones for presets to reduce the number of pedals to literally only ah this solo needs reverb boost delay. Or this intro needs clean. Or stuff like that. So that none of the settings can be easily messed with and its a simple digital file. So presets become like patch captures and rig captures for specific stuff. Even with just a tonex one. But one pedal board and amp rig set up that can function for multiple bands at multiple venue sizes and formats. From everyone gets amps cranked cause house show with acoustic drummer. Or needing to go direct Into a PA or hybrid. And if a bar PA is set up crap I can still provide some front of stage sound. And still get sustain feedback and stuff. Idea is carry the least gear possible to do anything and everything. In the lowest weight easiest to carry package. And everything almost like an all in one except still with the benefits of more analog rig as well. Plus having a pc at hand at all times. Band side video of shows. With real direct capture of performance. Blended with some room noise. Makes music videos easy to do and helps band marketing.

@calebcadainoo I know that's still a long explanation. Short version is. Essentially full hybrid rig that's a do everything and more rig. With ability to make it easier on formance stuff and switching settings for song to song stuff or band to band stuff. As well as emergency oh crap someone's stuff isn't working or missing. Fine here and save the day kinda rig. Each preset for a group of songs. Or even a single song with the external switches for everything and right at the front becomes easy to change stuff up. Prevents the shoegaze genre issues of having to stare at the pedal board. Given the number of presets available on each x gear pedal. Plus the amps on the tonex. I get 70 times like 1200 sound combos there. Add in the joyo zombie and there's 2 times 1200. With or without or both at the same time cab sim outputs with the valeton. 2x12 and powered PA speaker that recreates the look of the rock and metal band stack but smaller lighter weight and more versatile. And like amp switching channel switching and effects switching to ridiculous levels. And a single rig with enough options to basically function for multiple bands. Cover stuff and other genres I play outside my band. My bands stuff. And writing tools. Along with the ability to save everything as a chain already preset to how I want and make it more simple. And for certain shows I got 110w of half powered PA and half 2x12 cranked and can always get a 4x12 for those to add in. My guitars are gonna be similar idea. Gibson or fender or other scale length. But seymour duncan custom shop versions of p rails. P90s single coils in one that together function like a humbucker. Add in push push potentiometer and some dip switches. In phase or out of phase. In series or parallel wiring. 3 pick up types. And a switch letting you blend everything how you want with pick up section. P rail single p rail or 3 p rails. Trem system with a drop d lever. Plus the drop tune pedal. And then a hardtail for quick tuning changes. 3 guitars. 1 I can carry with me with my pedal board. 2 guitars and 2 speakers for the rest. My entire touring rig. I can carry everything except one speaker into a venue in a single trip. Faster set up and tear down. Lighter and less to carry. For most shows I don't even need the powered PA cab. And can run headphones or speakers for monitoring. Or both.

Yes it 100% possible to use the Valeton with other effects units. I did a brief explanation in this video: czcams.com/video/zTPGatJtXOo/video.html

Wow amazing

You're welcome bro 🤗

Wow

How do I know she loves me?

Thank you

What challenges are you experiencing?