![Lukas Bißlich](/img/default-banner.jpg)
- 43
- 44 358
Lukas Bißlich
Registrace 16. 11. 2013
OMP M7 little fly around
OMP Hobby M7
Scorpion HK5-5024-535kv
Tribunus 200A
KST 12Volt HLS Combo
Bonka 6S 5200mAh 120C 2x
Rapid 700mm and 105mmAZ Pro
Vbar Neo
12Volt BEC
3S 700mAh Bufferpack
Scorpion HK5-5024-535kv
Tribunus 200A
KST 12Volt HLS Combo
Bonka 6S 5200mAh 120C 2x
Rapid 700mm and 105mmAZ Pro
Vbar Neo
12Volt BEC
3S 700mAh Bufferpack
zhlédnutí: 652
Video
104“ Extreme Flight NG 12Volt servos testflight
zhlédnutí 156Před 4 měsíci
This NG is powered by: KST SV6010-12 12Volt Servos 120ccm PK Gear (Ratio 2,727) Scorpion 5035-410kv Scorpion Tribunus 200A 4x 6S 5300mAh 50C OptiPower Ultra 12S2P Fiala 28x14 E Prop (wide)
E-Glogo 690 8min flight 1350RPM to 1880RPM
zhlédnutí 407Před 6 měsíci
This is a complete flight of my own build E-Glogo 690. it feels still a bit strange to fly with a Phone on my hat. But new construction will handle the next The Basic of it is a Mikado Glogo 690 Nitro. My Setup: -3x KST X20-7.4-M-830-1 HLS V8.0 -1x X20-1035 V1 (the first X20-1035 ever) -Scorpion Tribunus ll 12-80A - Scorpion 4525-380kv Mikado Edition -2x Optipower 6S 5300mAh -Rapid 690mm -Rotor...
OMP M4Max sunny vibes KST/ Scorpion/Optipower/Vbar
zhlédnutí 173Před 6 měsíci
Ein kleiner Sonntagsflug mit meinem meinem M4 Max auf dem Hause OMP. verbaut ist: 3x KST Servo DS215 1x KST Servo DS565X 1x Scorpion Tribunus 06-80A Vstabi Mini mit Satellite Optipower 6S 1800mAh
OMP M4 Max saturdayvibes funflight
zhlédnutí 282Před 6 měsíci
To be honest, it was cold….. 3x KST DS215 MG V3 OMP Servoarms 1x KST DS565X with Carbonspacer and KST Aluminum Servohorn Scorpion Tribunus 6S-80A Vbar Mini Vbar Satellite Optipower 6S 1800mAh OMP stock Blades RotorTech Ultimate 420mm Stock Tailblades Thank to all my Sponsors: KST High Performance Scorpion Power Systems Optipower Mikado Vbar
OMP M4 Max middle and lower RPM
zhlédnutí 471Před 6 měsíci
Hello everyone, this is my second try to fly the my phone on a Basecap. That is a bit strange feeling but the time I can deal with it. Take some time… But here my Setup: 3x KST DS215 MG V3 OMP Servoarms 1x KST DS565X with Carbonspacer and KST Aluminum Servohorn Scorpion Tribunus 6S-80A Vbar Mini Vbar Satellite Optipower 6S 1800mAh OMP stock Blades RotorTech Ultimate 420mm Stock Tailblades Thank...
OMP M4 Max relaxing flight
zhlédnutí 276Před 6 měsíci
Hello everyone, this is my first try to fly the my phone on a Basecap. That is a bit strange feeling but the time I can deal with it. Take some time… But here my Setup: 3x KST DS215 MG V3 OMP Servoarms 1x KST DS565X with Carbonspacer and KST Aluminum Servohorn Scorpion Tribunus 6S-80A Vbar Mini Vbar Satellite Optipower 6S 1800mAh OMP stock Blades RotorTech Ultimate 420mm Stock Tailblades This f...
Mikado Glogo 690 by Lukas Bisslich KST X20-1806 in test
zhlédnutí 405Před rokem
Glogo 690 🚁💨 The pure fun of Nitro Thank you Kyle Dahl for this amazing Heli My setup: KST X20-1806 Swash KST X20-1806 Throttle KST X20-1035 Tail OS 91HZ Hatorie Pipe 16% Fuel Optipower 2S 3500mAh Optiguard Align Governorsensor Align 3-Way Fuel Filter Vbar Neo Pro Version with Vbar Control Rob Dampers Pichler Glow ✅ KST High Performance Servos Scorpion Power System co., ltd. OptiGlobal Mikado M...
How To F3P Vortex 67gr all about and Flight. Englisch version
zhlédnutí 10KPřed 2 lety
This is a Video about my Vortex F3P and i am very Happy with all. Thanks for watching
How to F3P Höhenruderservo einbauen / Elevatorservo F3P
zhlédnutí 1,7KPřed 2 lety
How to F3P Höhenruderservo einbauen / Elevatorservo F3P
How to F3P Finest Composite Indoor Extra 330LC
zhlédnutí 5KPřed 2 lety
How to F3P Finest Composite Indoor Extra 330LC
How to F3P Vorstellung Vortex F3P und fräsen von Depron
zhlédnutí 6KPřed 2 lety
How to F3P Vorstellung Vortex F3P und fräsen von Depron
E-Glogo 690 build and manufacturing by Lukas Bißlich
zhlédnutí 245Před 3 lety
E-Glogo 690 build and manufacturing by Lukas Bißlich
Whiplash 700 Gasser V2 2019 testing Prototype Mainblades
zhlédnutí 415Před 4 lety
Whiplash 700 Gasser V2 2019 testing Prototype Mainblades
Whiplash 700 Nitro V2 from Miniature Aircraft
zhlédnutí 486Před 5 lety
Whiplash 700 Nitro V2 from Miniature Aircraft
Whiplash 700 Electric V2 Prototype by Marcel Schimanski at Kirberg 2018
zhlédnutí 438Před 5 lety
Whiplash 700 Electric V2 Prototype by Marcel Schimanski at Kirberg 2018
Whiplash 700 Electric V2 Prototype by Marcel Schimanski
zhlédnutí 64Před 5 lety
Whiplash 700 Electric V2 Prototype by Marcel Schimanski
Henrik Clausen Extreme Flight MXS 104"
zhlédnutí 378Před 6 lety
Henrik Clausen Extreme Flight MXS 104"
Miniature Aircraft Furion 6 on 6S Sundaymorning Flight
zhlédnutí 161Před 6 lety
Miniature Aircraft Furion 6 on 6S Sundaymorning Flight
Furion 6 on 6S eveningflight @Habo Helimeeting
zhlédnutí 106Před 7 lety
Furion 6 on 6S eveningflight @Habo Helimeeting
Xcell Furion 6 6S by Lukas Bißlich Team Miniature Aircraft
zhlédnutí 196Před 7 lety
Xcell Furion 6 6S by Lukas Bißlich Team Miniature Aircraft
Miniature Aircraft Furion 6 on 6S by Lukas Bißlich easy Eveningflight
zhlédnutí 136Před 7 lety
Miniature Aircraft Furion 6 on 6S by Lukas Bißlich easy Eveningflight
Beautiful flying field!
Sauber 👍
บินได้ยอดเยี่ยมมากๆ
gut gelenkt
Dankeschön 🙏
Moin, sag mal welche Spacer und welches Servohorn verwendest du genau auf dem Heckservo?
Moin, das ist eine 2mm CFK Platte mit dem selben Lochbild wie das Servo hat. Gibt es z.B. vom Oxy5. Ich hab es selber gefräst. Kann man aber auch von Hand herstellen 😉. Aber die Stoppmutter passt dann nicht mehr auf den Hebel. Das muss dann mit Locktit eingesetzt werden.
@@lukasbisslich Okay verstehe. Der ist nur zum Überbrücken der Höhe damit der Original Servo Halter passt? Und welchen KST Servo Arm benutzt du bzw. in welchem Abstand hängst du das Gestänge ein? Ich hab das Problem, dass ich bei meinem mit der Anlenkung gegen den Servo selber stoße.
@@R3v0101 genau, damit das Servo nicht ans CFK kommt. Am einfahren ist es natürlich mit einem 12mm Servo. Hatte das 565x noch übrig. Dann kann man es ja auch unterlegen das es passt . Als Hebel nutze ich den MW-5009 von kst-servo-shop.de und am kleinsten eingehangen und am Heckrotor weit Außen. Einfach sonst kurz bei RC-Heli im Forum anmelden und im Thread von dem OMP M4 Max ein Foto vom Problem posten 😊
Vielen Dank für die Info. Ich hatte noch ein X15-755 rumfliegen und hab das mit selbstgedrehten Messing Buchsen verbaut. Das Gestänge passt aber auch nur auf eine einzige Art und Weise so rein ohne anzuecken. Leichtes Heckwackeln hab ich trotzdem noch. Aber vielleicht bestelle ich noch ein 12mm Servo. Versuche mich seit Tagen im RC-Heli Forum anzumelden aber die Moderatoren haben meinen Account noch nicht frei gegeben.
Nice flight
Thanks mate, for a „after long week“ flight sense to be okay 😉
Sauber
Danke 🙂👍
Sehr Geil 😊
Sehr schönes Video. Diese Extra habe ich auch gerade auf meinem Bautisch liegen. Sonntag in einer Woche ist wieder Hallenfliegen. Bis dahin muss das Teil fertig sein. Ich bin gespannt. 😉
how much does it weigh?
RTF 67gr
that is light. when i built balsa wood flying kit planes as a boy i remember weight was always a problem but i used to fly some of them with the small cox glow plug engines 60 years ago. what you're doing is way different and very interesting.@@lukasbisslich
Lieber Friend, is it possible get or buy the plans off beautiful plane. Where can I buy the motor and propellor?
Fantastic. Perhaps a split rudder could be used to help slowdown the vertical descent?
geil , das ding mus her , welchen regler und latte hast de denn dran????und was für servos kann ich denn einbauen,
hi, was nehmt ihr denn für Bespannung des Gerippes? Handelsübliche Frischhaltefolie.? sollte das nicht glatt sein oder ist die UNREGELmäßigkeit gut für die Strömung ? 😀😀
Hallo kannst Du mir sagen welcher Motor verbaut wurde
Hallo, ein Pichler Pulsar 2204/2200kv
Hey Lukas. Great video, I was wondering what you settings were especially on the elevator and mainly the expert settings. I know they are transferrable but interesting to get a feel. Thanks
What its the cost of A kit?
www.rc-network.de/threads/vorstellung-vortex-f3p-aufwind-für-den-indoorsport.11884332/page-3 there you can find the Files 🤗
@@lukasbisslich yes I know, you already send them to me. It is me Yme Schrichte
Pdf please friend
Hi, what about pushrod wiring
Hi, what kind of glue did you use? Usually when I try to build one F3P it melt the foam
For building UhuPor for the Foamyparts than Ponal PUR Glue for the Carbonrods
@@lukasbisslich thank you
what motor?
Beautiful!
Gratuliere👍😎 der Aufwand hat sich gelohnt 😎 Gruß Rolf
Danke für die Blumen, definitiv ja 😅🙌
Vorsicht und Ruhe 🤣🤣🤣 wie geht das🤣 freu mich auf das nächste Video 👍👍😎
Qual o nome deste material que parece depron que é flexível????
Flexi Foam
Hallo Lukas, coole Sache, wird es den Plan des Vortex als free Download geben? Grüße, Bernhard
Hallo Bernhard. Ich will die Daten erst einmal nicht frei geben. Aber ich habe noch einen Depronsatz über 😊
@@lukasbisslich Alles klar, danke dir für die Antwort. Bin auf deine weiteren Vid. gespannt.
@@DrLowRPM die Daten kann ich sonst auch per Mail weiter leiten. Gerne einfach per Facebook anschreiben
www.rc-network.de/threads/vorstellung-vortex-f3p-aufwind-für-den-indoorsport.11884332/page-3 die Datei ist nun Online
eine menge Arbeit für ein bisschen Flieger 🤣🤣🤣 Depron hab ich schon einiges gefräst, eine MPCNC. ich benutze ein 1mm Fräser und das mit 1500mm in der Minute bei 12000 U-min an der Spindel. der Vakuum Tisch den du hast ist schon was tolles. bin gespannt wie es weiter geht 😎 Gruß Rolf
Ja das ist echt viel Arbeit die sich aber lohnt
Top 👌🏻
This is the most badass thing I've ever seen. What's the typical flight time? What's the flight characteristics compared to nitro and lipos? How different is flying it?
Wow! This seems comparable to a very powerful electric heli!
great flight!
Great flying.
Wow !!! Nice flight !! And such a cool helicopter.
Surpriced to see it holds up in this kind of flying, i guess good pitch management is a big issue here but more power than i anticipated, great flying and pilot
Great Flt!!! question, how did you installed the Gov Sensor and can you show a pic. Also if its no problem explain a how to. Thanks
Wow! This is awesome. What was the motivation to make an electric conversion of the nitro model? Carbon frames?
FlyingPolak yes the reason why is to have a Carbonframe and the Aluminiumparts in the Chassie are Selfmade and i love the bigger Canopy of the Glogo. A Helipilot on Instagram startet the first E-Glogo and i was right in love. So i decided to creat one on my own 😅
Nice. Put a smile on my face.
Wow that is Dope as Hell! Never seen a turbine heli do 3d like that! Good flying!
Great flight! Most pilots treat a turbine with kid gloves; nice to see one do some smooth 3D.
Fantastic fly 💙💨
wow its strong
LOVE IT!!!..
Incredible flying and with a turbine!
That's insane...
Wow! It is so rare to see a turbine flown the way you demonstrated! And it took that beating with pleasure 🤣 awesome show Lukas!
Wow
Which pinion do you use? The battery would be 75c 4s pulse?
Hello Stock Pinion 11t with a 4S 1300mAh SLS Quantum Pack on a 4100kv Motor
Excellent flight friend, very good indeed! I am thinking of flying with to esc hw60a v4 pinion 15t lynx motor 4100kv still pulse 1350mah 4s 75c for an extreme flight :). Thank you for your attention.
Hallo Lukas , bin selber gerade am überlegen ob ich mir den Oxy3 holen soll 😊 Bist du mit dem zufrieden ? Such ein Trainer Heli hatte selber den Alzrc Devil 380 war aber damit leider nicht wirklich Glücklich ständig irgendwelche Probleme damit sei es das Heck oder Servo Zucken unter dem Fliegen . Und da verging mir die Lust am Heli fliegen. Man kann den ja soweit Zahm machen Drehzahl herunter und etwas Epo drauf sollte der doch soweit gut zum Steuern sein oder ? Gruß Andreas
Der Oxy ist wirklich ein klasse Übungsheli. Ich fliege mit ihm fast jeden Tag. Die Ersatzteile sind Konstengünstig und der Heli fliegt sich wirklich sehr Erwachsen. :-)
Lukas Bißlich Hallo Lukas, dank dir für deine Antwort 👍😉 Das mit dem Erwachsenen hört sich sehr gut an . Hab mir vor paar Tagen den XK K110 bestellt um wieder etwas rein zukommen ins Heli fliegen .Ich denke ich werde mir den Oxy mal gönnen 😉 Es gibt vom Oxy3 ein paar Versionen sollte man auf die neuste OXY3 Tareq Edition oder die einfachere mit den 255mm Main Blade ? Da bin ich noch am überlegen 🤔 hast da evtl. paar Infos für mich ? Danke dir im Voraus schon mal . Gruß Andreas
i have the same Motor esc combo , mine get super hot.