Video

Hi.mate, could you please let me.know what am part number is that? I need to replace mine. Cheers

Good evening John, I have an oil pressure light that comes on after about 20 mins at idle, if I give it revs it goes out, as soon as no revs it comes back, I have changed the oil pressure sensor, new oil and filter, have taken the sump off, no sludge etc, oil strainer seems fine, could it possibly be the spring you mention in the oil filter housing? If so can I take it out to clean it? Many thanks

I've got the same problem with my astra 2019 1.6 cdti changed oil and filter now 4 miles of driving says oil pressure low turn the engine off . And a rattling noise started . What could it be ? Thanks

John. Do you still fix PCB’s?

H This Bord price ?

Thank you, this is brilliant. It is very helpful. I am studying pre vocational electrical. I need all the help I can get.

We just got alto ts315. I'd be very interested to see what these "2000w" speakers have under the hood and what you'd have to say about it compared to the EV.

Our same EV speakers over heat. Not touchable. What to do? We have 3 subbase and 6 heads ( tweeter -mid)

Hi John, I don't have this kind of programmer and I wonder if it could be done with Digilent Waveforms software? There and SPI protocol and looks like made with purpose. Or is it better with Arduino? Thanks in advance,

Hi John...thanks for great videos! I have a EV 15P with a electronic buzz from speaker not mechanical...any ideas? sounds a bit digitalish...caps?...regulators etc as I havent even looked at this amp yet...TIA...another John ;-)

Great video😬

Unplug these scopes from the power socket when not in use, the power supplies on these models are notorious for burning up the main filter capacitor as they have 4 2W resistors right beneath the DC filter cap on the smps, over a period of time this cap dries out and the power supply goes up in smoke and costs over 1000 GBP. Good option is to replace the capacitor perodically say 2 years cycle.

on mine sud the Power button doesn't have Auto mode, wtf.. just On and Off

Hi, someone have part number for Opel Corsa E X15 2017? 1.3 CDTI

Hi man, my DBR10 volume knob is broken, do you know where or how I could replace it? Would appreciate any tips and advice, thanks man

Using a relay as fuse is novel, indeed. In the case your noise is perfectly random, you can average the readings over, say, ten measurements or so and get very good results.

lexia3 pp2000 is your friend

hi Johm. do you know a replacement for irs2156s? best regards!

Hi John, Where are you based and would you be prepared to take a look and repair my mackie subs? Thanks

You know more than 99 percent of qualified mechanics about this. 😂

i just received another unit zlx12p, no power as usual, all the resistor burned. Replaced the resistors, burned diodes, mosfet and the chip as well. Fired up, still no power, checked at rectifier and mosfet, 300+v present. Any idea what could be wrong? Thanking in advance.

thanks a lot you help me out and now mys is working 👍

Great

Should I also replace my resistors, the four with the two large capacitors next to them and which ones should these be? 7:15

Hi sir, Your videos helped me to learn. sir, It is possible to interface 32gb SD card. and same procedure need to follow or different procedure need to follow?

Hi, John. Currently I'm experimenting onthe same si4703 board. My controller is NodeMCU. My problem is I can't break out of the SEEK or TUNE cycles. Datasheet says when tuned to a channel or seek finds a channel STC and/or SF/BL bits goes high. But they never goes high! The code segment is below: //Poll to see if STC is set while(1) { readRegisters(); if((si4703_registers[STATUSRSSI] & (1<<STC)) != 0) { break; //Tuning complete! <==== Never reaches here! } } Considering you've spend enough time on this chip, can you spot what I'm doing wrong?

6:19 you mentioned .1 ohm resistor but i cant find these anywhere

Do you repair for anyone? I have 2 swa15 amps that's in need of a repair? I love in Norway, but if shipping the amps to You would be OK?

Gracias por tu video desde españa

Is it possible to leave it in just one color, like red?

Ive always wondered why they sound so underpowered , i have 2 ev zlx 12 p and 2 alto ts212, and they have always sounded underpowered compared to the altos. But with this new knowledge im willing to bet that the altos are also using the same scheme. Credit to EV they are much more reliable rhan the altos never had any issues, but I've had an undesirable experience with Alto they keep on breaking, they're on their 3rd pair of tweeters second pair of preamps and now going in for thier 3rd pair of preamps. The altos are never pushed hard they are only used for stage monitors Im not a fan of the EVs, i hate them even more, but i do agree with some of the comments, they really do sound nice.

I have Astra 1.7 cdti...had same case of oil level indicator turned on on low rpm after oil and oil filter change. After seeing this video I opened oil filter housing, only on this car it's a bit different. Didn' t find anything inside, although I would say that plastic central cage is partialy broken. Then I remembered that old filter didn't came off too easy, but new one came on with no pressure. At that time I didn't think it was important. But it is. I mounted back old filter and everything is fine now. Apparently it has to be tight so no air can come through, than it can build up the pressure. Gonna have to do some precision measuring before bying next new filter. Hope this helps someone.

My C48 is damaged with a burnt track on it. what's C48's value?

Thanks a lot for this video. It is the only source I could find to fix my issue. Lost oil pressure after oil change and found the valve I did not know exiated with broken legs and dislodged so all oil was going down the drain. Now I am waiting for replacement part and running with the broken to plug the hole. My cam adjusters make slight knocking noise when hot. Could I have damaged them while starting the engine with no oil (at least 10 times).

In having similar problem. Cleaned the sump and strainer still giving a tapping sound once it warms up think I'll clean up the oil filter housing .new filter again and new oil .

Hello John! I have been looking at your video now after having 2 of my v2 speakers go out on me, just found 1 problem om each amp just looking at it, was just going to ask for your opinion on them if thats okey? On the first one i have CapXon 100v 470uF blown, can not see anything ells thats broken on that one, the amp was smoking alot when this happend, should i be worried that somthing ells is broken in this case? Second one, i just noticed that C227 just right to the CapXon is blown, nothing ells. Great videos showing problems on amp to someone like me that just started looking at devices like this! All the best! //Erik

Thank you for the information.

What is best 15 power speaker to buy my Ev ZLX went out

nice work sir

Thanks John, great to see a pro at work! Cheers to you. ps I gave a titan15 on its way to me

Hi john can you explain how you remove this amplifier casing,i have same sub and im struggling to remove amplifier casing can you please tell me how to remove upper metal casing thank you

Thank you for this. I had the same problem which took a month to find because one day the heating came on and another day it wouldn't. It seemed so random. Hot water always came on. I didn't find out what was happening until I turned the hot water off and the heating switched on! The valves looked OK. The boiler was serviced and it worked because hot water wasn't being demanded. It's one of those problems that can make you go bonkers. In the end, a two minute job to replace the st9400c and it all worked again! So annoying.....

Can I get the PDF

Hi can u tell me the npn and pnp 3 legs transistor full name nd value which u changed in that..plz

Great video. Noticed your R32 looked a bit warm. I have just been looking at one of ours, we think repaired before, R32 had been replaced and burnt again. Was replaced, but the speaker failed after about 20mins on Friday night. Ex tv engineer, retired, so I get lost with these new psu's!

I got retrofit cruise control on my 207, year 2007. Everything went well at the work shop, until the program started to complain about temperatures being too high! Apparently you can't install cruise control if the motor temp is higher than 30 celsius. :D Even the mechanic was baffled and didn't know what to do and the installation failed, even when the motor cooled down. The program still complained about temperatures. Do you have any ideas what could be the issue? My dash just says "cruise control impossible." I don't find anyone online having similar problem...

Why did you choose STF15NM65N transistors for replacement?

Hello, i have a problem on my ELX118P because at 30% it makes sound cuts. I swapped the power supply and the pair of small amplifier modules with the ELX112P preamp card, I can go up to 100% of the power, so it's the ELX118P preamp card that is defective? Which component would do power limiting?

Took the panel off today and the 'cut around' tip you gave saved me drilling a rivet out. Managed to reattach the window to the clip. Many tha👍

What engine was this on please.