Video

I test, score and rank all earbuds for ANC.

😂

Both are available. I have reviewed them both.

Currently using OBS

Glad it was useful👍

I tried to do this for 3 hours until I found this video, very explanatory thank you

I found the video helpful so I subscribed and liked it.

Timelapse when setting up webcam I deleted ffmeg file How can I bring it back?

I liked and subscribed because I found the video helpful.

Thank you for the feedback, really appreciate it👍

Thank you for the feedback👍

Really appreciate the feedback, thank you!

Thank you very much for the feedback!

Exactly

Sure, you can share a new host directory with any docker container, even multiple containers at the same time. Just mount it as a volume in the docker-compose of each container you want to provide shared access to.

@LeoTechLab is that in the bottom portion of the docker-compse file?.where it says volumes: octoprint?

@vitaliydvorkin1342 exactly, just add a new line mapping a local host directory (your new drive, for example) to a directory inside your container. That way your container can access the new drive using that volume mount. You can refer to the docker manual on volumes for more information. But this really depends on what exactly you are trying to achieve...

@LeoTechLab pretty much just add more storage options. I tried moving a container but I ended up deleting it and making a new one somewhere else and that didn't add new data. I even changed the volume from the original octoprint:/octoprint to the mount point of the ssd and the new instance octoprint still only had 32 gb max

That's because that specific octoprint docker image was probably created with that allocated space to begin with. I think you can override that setting, look it up in the docker documentation.

Thank you for the feedback👍

Muito obrigado pelo feedback, ainda bem que foi útil! Relativamente ao agendamento via task scheduler, ele só executa quando o sistema é reinicializado porque estou a usar o trigger "at startup", que literalmente significa "no arranque do sistema", ou seja, quando o mesmo é reiniciado. Para outro cenário de arranque automatizado é mudar o trigger para o pretendido👍 Atenção que se estiver a usar hibernação para desligar o computador, ele na verdade nunca vai executar a task, porque não fez um reboot, manteve o estado anterior do sistema operativo. Aí a solução é desligar a hibernação ou então mudar o evento para "resume from hibernation". Eu recomendo desligar a hibernação, porque dessa forma temos uma só regra e o mesmo evento de "at startup" funciona para os dois cenários: reboot e desligar/ligar.

@@LeoTechLab Oi Leo, fiz uma pesquisa para poder executar o arquivo.bat na inicialização e encontrei uma solução mais certeira que faz a maquina inicar sempre que o windows é ligado e fui mais longe criando tambem um arquivo que é executado automaticamente quando se faz logout no windows. Devo confessar que esse ultimo acredito que funcione já que não tenho comosaber ao certo. Fiz o teste diversas vezes e correu tudo bem em todas. Abaixo passo o procedimento para caso tenha interesse, mas imaginando que pra voce isso não é nenhuma novidade, rsrsrs. Peço desculpaspela ousadia que querer ensinar a missa ao vigário, mas fiquei tão setisfeito com suas aulas que me senti obrigado a retribuir, mesmo sendo de forma tão simples, obrigado! Para executar um arquivo .bat na inicialização do Windows sem que a janela do CMD apareça, você pode usar um script em VBScript. Aqui estão os passos: Crie um arquivo .vbs: Abra o Bloco de Notas. Copie e cole o seguinte código: Set WshShell = CreateObject("WScript.Shell") WshShell.Run chr(34) & "C:\caminho\para\seuarquivo.bat" & Chr(34), 0 Set WshShell = Nothing Substitua C:\caminho\para\seuarquivo.bat pelo caminho do seu arquivo .bat. Salve o arquivo com a extensão .vbs, por exemplo, iniciar_oculto.vbs. Adicione o script à inicialização: Pressione Windows + R, digite shell:startup e pressione Enter. Copie o arquivo .vbs que você criou para a pasta que abriu. Para executar um arquivo .bat antes de desligar o Windows de maneira oculta e com um atraso de 40 segundos, você pode seguir estes passos: Crie um arquivo .bat: Abra o Bloco de Notas. Copie e cole o seguinte código: @echo off vmrun -t player stop "C:\VMs\Ubuntu Server\Ubuntu 64-bit.vmx" soft timeout /t 40 Salve o arquivo com a extensão .bat, por exemplo, executar_antes_desligar.bat. Crie um arquivo .vbs para ocultar a execução: Abra o Bloco de Notas novamente. Copie e cole o seguinte código: Set WshShell = CreateObject("WScript.Shell") WshShell.Run chr(34) & "C:\caminho\para\executar_antes_desligar.bat" & Chr(34), 0 Set WshShell = Nothing Substitua C:\caminho\para\executar_antes_desligar.bat pelo caminho do seu arquivo .bat criado no passo anterior. Salve o arquivo com a extensão .vbs, por exemplo, executar_oculto.vbs. Configure o Agendador de Tarefas: Pressione Windows + R, digite taskschd.msc e pressione Enter para abrir o Agendador de Tarefas. Clique em “Criar Tarefa”. Na aba “Geral”, dê um nome para a tarefa, por exemplo, “Executar BAT antes de desligar”. Marque a opção “Executar estando o usuário conectado ou não” e “Executar com privilégios mais altos”. Vá para a aba “Disparadores” e clique em “Novo”. Em “Iniciar tarefa”, selecione “Em um evento”. Em “Log”, selecione “Sistema”. Em “Origem”, selecione “User32”. Em “Id. do Evento”, digite “1074”. Vá para a aba “Ações” e clique em “Novo”. Em “Ação”, selecione “Iniciar um programa”. Em “Programa/script”, navegue até o arquivo .vbs que você criou. Clique em “OK” para salvar a tarefa.

@@RickBel1996 Obrigado pela partilha! Informação é poder, e partilhar a mesma é essencial para podermos todos aprender uns com os outros para evoluirmos em conjunto ;)

Hi! Glad it was useful ;) Regarding your gcode directory, I'll start by asking if you already added the [virtual_sdcard] section to your printer config file? If not, please do so and point it to "/opt/printer_data/gcodes". If the problem persists, please read the rest ;) Just to be clear, given that this is using docker, the "/opt/printer_data/gcodes" only exist inside the docker volume "gcode", accessible by both klipper and moonraker. I'm not sure how your slicer is configured to interact with klipper, but if it is using the Moonraker APIs directly, it shouldn't have any problems uploading the gcode file to klipper. If, on the other hand, it is trying to access the file system directly, it won't find the "/opt/printer_data/gcodes" folder on the host system, because it does not exist in it. As I already said, it is a docker volume that is only accessible directly by docker containers that request it, such as klipper and moonraker. You can try and manually upload the file using fluidd or mainsail directly. If that works fine, I would say the problem is probably in the integration between the slicer and klipper. If by any chance this integration is the problem, and if you want to continue using the slicer integration, you can always try to switch the docker volume for a docker bind mount and mount a physical directory on your host system. Maybe that will help the slicer integration. Just change the all the volume mappings from "gcode:/opt/printer_data/gcodes" in the docker-compose.yaml of prind to "/opt/printer_data/gcodes:/opt/printer_data/gcodes", and ensure that you also create the "/opt/printer_data/gcodes" directory in your host system. This will bind mount this host directory to the virtual directory with the same name inside the docker containers. Hope this helps.

For mic alone, Liberty 4 are the best of those 3.

@@LeoTechLab can you rank them ?

@gggffffccc6951 I already did. You have the rankings in my excel spreadsheet, it's referenced in the description of all my earbuds videos.

Não testei nenhum deles, mas gostei imenso dos realme buds Air 5 Pro, e pelo que percebi quase nada mudou para a versão 6.

@@LeoTechLab faz a comparação do redmi buds 5 pro por favor

@VídeosOnline-d7t Talvez um dia se proporcione😉

Thank you for the feedback, really appreciate it!

Thank you for the feedback, glad it was useful👍

Thank you for the feedback! Yes, these do edge out the Liberty 4 NC in terms of sound quality, especially for their dual driver setup, in my opinion.

@@LeoTechLab Thank you so much! I bought the Realme for 60 euros 😃 im just a bit worried for the bad reviews about the battery life, and some reviews that talks about one of the earbud stop working.. this last problem its the one i need to avoid the most cause it already happened two times forbother wireless buds..

Great price on the realmes! So far mine have been working very well. Hope you like them! Enjoy👍

@@LeoTechLab Thank mate! I hope so! One last thing, i saw that the 60hz frequencies are not present in the eq, Does this aspect make it more complex to obtain the sound you want, or does it not create particular difficulties?

In my case, the "Nature Balance" preset is great, so I didn't have to use the eq.

Thank you for the feedback! In my opinion, the realme buds Air 5 Pro edge out the Liberty 4 NC in terms of sound quality, especially for their dual driver setup.

realme buds Air 5 Pro. You can watch my review on them, and you have my full listing of earbuds to compare mic quality as well in the video description.

@@LeoTechLab thanks gonna watch it now

@@LeoTechLab is realme buds air 5 pro same as redmi buds 5 pro?

No, different brand...

@@LeoTechLab ok but which is better ? realme looks more expensive tho

Although I currently don't use proxmox in my setup, I don't see why not. Proxmox is a type-1 hypervisor, so as long as you are able to configure the usb passthrough to the debian VM you want to create to make use of the 3d printer and webcam directly inside the VM, you should be ok👍

@@LeoTechLab Thanks I’ll try it later today

Thank you for the feedback! Hope it was useful!

When using two earbuds, usually they seem to cancel one of the mics to reduce wind noise. Common on most earbuds.

Thank you for the feedback. Glad it was useful!

Thank you so much for the feedback! Regarding the mono mode, I know I can do it at the operating system level, but that's not a good experience for me, given that I have to manually remember to keep switching between mono and stereo. I rather have the earbuds do the job on their own😋

Yes, they are really awesome for the price👍

for phone calls, these are the best I tried so far. Liberty 4 NC and realme buds Air 5 Pro are also excellent

@@LeoTechLab Thanks, I own them for about 1,5 years and don't know which ones chose next. Soundcore little slow this time releasing new stuff lol

I'm currently using the realme buds Air 5 Pro as my daily drivers, and I'm very happy with them👍

Com baterias de lítio o problema da degradação não é relevante neste tipo de aparelhos, na minha opinião. Pela minha experiência, é mais provável que os buds deixem de funcionar por alguma queda do que por problemas de bateria😋. Sempre que não estiverem a uso, é guardar na caixa e deixá-los a carregar e fazer a gestão da bateria eles mesmos, é o que eu recomendo.

Thank you very much for your feedback! It really means a lot👍

Muito obrigado pelo feedback, ainda bem que foi útil! Os air 6 pro parecem idênticos aos air 5 pro. Nas specs só reparei no rating IP diferente: IP55 vs IPX5. Em princípio deverão ser pelo menos tão bons como os air 5 pro, digo eu 😋

Glad it was useful 👍

Didn't know the 6 came out. Just took a brief look at the specs and they are nearly identical. The 6 seems to have better IP protection (55 vs X5), but that's about it... Other than that, I would have to test them personally.

@@LeoTechLab thanks

Thank you for the feedback! Hope it helps👍

Sim, pode flashar o firmware directamente por cabo USB, ou então experimentar outro cartão SD.

Obrigado pela rápida resposta, o leitor de cartão não está funcionando mesmo, poderia indicar algum tutorial ou guia para flashar por cabo USB?

Sim, o próprio Prind que eu usei no video permite flashar directamente a placa, é só seguir as instruções no github do Prind, aqui: github.com/mkuf/prind?tab=readme-ov-file#build-the-mcu-code

@@LeoTechLab Leo Obrigado pelo excelente trabalho e pela pronta ajuda, já estou aguardando os proximos video! Valeu!

@RickBel1996 Obrigado pelo feedback! Ainda bem que foi útil 👍

Thank you for the feedback! Enjoy 👍

Thank you for the feedback👍

thank you for the feedback, I really appreciate it👍

can't remember where I got it, really, but it's free background music.

Thank you for the feedback. For the GPU, I'm not sure. I think the hypervisor gives you access to a virtual GPU. For physical GPU access, I think you would need to have two GPUs, one for the host and one exclusive for the Guest OS, and the hypervisor would have to support it was well, but I'm just guessing at this point.

Good to know, thanks 👍

Thank you for the feedback 👍

No, I'm not. My daily drivers are the Realme air 5 pro and the Soundpeats engine 4, at the moment.

Really appreciate your feedback, thank you! Glad it was useful!