Video

they are factory 4 x 4 Nissan hardbody fender flares, they fit the contour of the fenders, though I don't think they would fit a ranger, but if you ever come across a set it might be worth a try!

thanks man!!😎🤙🏼

The Lamborghini Gallardo was beautiful!

thanks man I really appreciate it! ots always fun talking about the cars! Sometimes you just learn as you go to!

i know it hahahaha, hopefully it won't be long before the trucks on the road now!

y sad lol?

thanks man! The parking garage was a really cool location for a meet! Looking forward to the next one!

this is a super old video, I've sent this video chassis swap the truck and now it sits real low over the wheels and it's also a convertible! It's a really long way!!

I would totally lower it down, I have videos on how to do it and it's really simple, you just need some 4 inch lowering blocks, that's about $50 and then you can just crank down your torsion bars but then you have to get a front end alignment but it'll make the truck handle so much much better and just look so much better, there's many ways to go about your exhaust, this truck is basically straight pipe with the cherry bomb, it was a friends truck wich was sold a few years back, if you want some of my other videos or especially on my Instagram of my purple truck, I have headers, 2 1/4 inch exhaust piping, a vibrant resonator and manaflow muffler and it sounds very clean and deep tone, also I don't know what your states tent laws are as I am in Maine

thanks man! and of course! that thing is awesome!

@@JapaneseMinitruckthanks man! Love the mini truck see it all the time !

😎😎

for sure man! it's a really cool build!!

So sick you found the video! both cars are beautiful, I met your friend with a golf!! there was so many cars, it was a great show!

no it was my starter.

😂😂😂

unfortunately, it was my friends car and it had ended up getting totaled, but it's been a really long time so I don't remember exactly where, I do think that he may have gotten them off of eBay. I would check there first!

That's super cool!!😎🤙🏼

I 100% agree, I just filmed a video right before this one on the Toyota AE 86 and riding in these old Toyotas are so much fun! Definitely the golden Era of Japanese cars!!

I just removed the comment, I don't let the negativity get to me, it's my friends car. He's proud of it, and so am I! they're real three-piece wheels, and he worked hard to build his car, It's all good though homie, everybody has there own style 😎🤙🏼

@@JapaneseMinitruck Yeah it was my bad, I can’t really be talking shit cuz I don’t even have car. Glad we could resolve this.

unfortunately, this is the most detailed write up of the car currently, i wish i had some more info on it!

for real man😅😅

We are 18 so we don’t know like a lot about these things but we wanna do it cause it’s a family truck and it will be his first truck and vehicle so we want to keep the shell

so in all honesty, I actually have a whole series where I tried to lower a 4 x 4, and the suspension just does not work with it, and it causes a lot of problems, the rule of thumb is two wheel drives get lowered in the four-wheel-drive get lifted, with that being said, you could probably raise it maybe an inch or two without having to worry about any major problems, you could swap his shell onto a four-wheel-drive frame, but it has to be another extended cab frame and you can't use the transmission because the transmission does not have a case for the four-wheel-drive components, so you'll be able to use your truck there's not much of a point in swapping it unless the engine on the other truck is blown, motivation though! There's no point in the 2 Wheel Dr. as a 2 Wheel Dr. unless building some sort of pre-runner style truck!

in the best way to put it, it would be a ton cheaper and weeks worth of work easier to lift a four-wheel-drive and then just keep the 2 Wheel Dr. is and then you would have two trucks, I only did the swap because these trucks are super slim where I am and they're always rotted, my 4 x 4 frame was completely rotted, and I wanted to build a lowrider so it worked out to frame swap it!

Lastly, I'm not shooting down the idea either, I just wanted to point out some of the harder points in doing it!

@@JapaneseMinitruck we want it to be a mudding truck so perfect bro appricate it and the cab that’s on the truck is his grandpas old truck before he passed so the cab means a lot to him but it’s a 2WD and gets stuck in the clay out here in FL 😂

hahahaha, thanks man!! this was from our cruise after bentleys yesterday!!

yo man, I love to hear that! Even I have had the black truck that's on my channel since I was 15 and I just chassis swapped it and I started going really crazy on it but I am 23 now and just aspire to keep the truck for forever, I even have another truck with some similar stories that I've had for a little over six years now which is my purple truck and again, i just plan to keep it indefinitely, that color sounds so sick. I'm gonna have to look it up!!

I mean a pretty much go over everything, it's a 20 minute video about doors, what are you struggling with figuring out? it wasn't really much of a how to install. It was just me putting new doors on my truck.

Hey, how's it going man, unfortunately, I do not remember what size I had gotten :(

you as well man!!

i'm not too sure, you can send him a message on insta though, his @ is @endlezz_ls400

thank you man! There was a lot of diversity in the cars this year compared to when I made it down two years ago! A lot of high-quality cars, I'll be looking forward to next years!!

thanks man!! 😎🤙🏼

Jaguar was definitely a beautiful car to see in person, the camera doesn't do it justice, but when he started it, It was insanely loud!! thanks for watching!!

thanks man!! I have a bunch of videos on this and my covertibke lowrider project d21 as well!!

if is a super nice color scheme! I have to make another video on this car sometime in the future, it had a bunch of really nice bolt on performance modifications installed, and it just handles like an entirely different!

these are 15 x 10! I do have to say though I highly recommend 15 x 8 you still have to do a little fender rolling but the 15 by tens will destroy your wheel wells unless you don't care hahaha , unfortunately I'm not sure what the exact offset was

@@JapaneseMinitruck lol ok well truck looks good! I ll be lowering mine soon once I can find some nice wheels for it 😅

I believe my friend called the manufacturer and had ordered his through there. It's from Volk racing!

thanks man!! it's an older production for sure! i've learned alot since this vid!

😂😂😂

Do not do this, I repeat do not do this, this was a video series converting my four-wheel-drive to 2 Wheel Dr., if you set your tie rod ends up like this, you will get bumps to go through tires like crazy and the vehicle will be on drivable, get the proper end for the pathfinder and do them right it's super easy! this video was just going over seeing if it's sensibly possible to lower down a 4 x 4 and it is not worth the time at all. It is a much better idea just too chassis swap to 2 Wheel Dr. and make things work properly.

@@JapaneseMinitruck oh yeah I’m just learning to do simple maintenance. They didn’t have many options for 1990 pathfinder tie rods on rock auto, I got 2 tie rod assemblies and then 2 inner and 2 outer tie rod ends from a different brand. As well at center link and idler arm. Gonna do the strut rod bushings and wheel bearings while I’m at it

so I believe these are American racing center lines, these were a 15 x 10 I think it had 225/50/15s all around, if you plan on lowering your truck, though I wouldn't go with 10 wides. I think eight is like the max you want to go with a little fender rolling or it will destroy your wheel wells unless you're all for that lol, if you look at some of my recent videos I had like 7 1/2 inch center lines with less offset on a different black truck before I put the wire wheels on it, the black truck in this video was a friends though and it got sold a while back!

@@JapaneseMinitruck dude! Thanks so much. You're a G. I'm keeping stock height - just feel unsafe with my baby tires 😂 your blogs recently have been sick. Best wishes man

of course, thanks for watching man! Also, the jaguar was a different Bentley cruise night, this video has two or three different cruise nights in it!

The fender flares are factory, 4 x 4, Nissan, hardbody fender flares! The only way to get them is off of a parts truck or too find a set online somebody has for sale!

@@JapaneseMinitruck solid man thank you🤙🏽

Man that would be so sick!!!

someday man!! they come up cheap every so often!!

thanks so much man! I'm always learning something, but I try my best!!

it's called vag fair and it's at Thomas point Campground in Brunswick Maine, it happens once a year, there's also one in Pennsylvania too!

it's my friend liam S4Passat on insta! it has a supercharged V6 in it!!

Of course! The RX7 Was Sick, I would've done a walk around on it, but I only caught it last second!😅

I actually have a CZcams video where I replace a speedometer cable on my purple truck, it's pretty simple. Just follow the cable to the transmission. Remove the bolt. Remove the bolt on the firewall and then you have to take out the gauge cluster and just feed it through the firewall, I think 95 to 97 is electronic