Video

Should of put a 17t

Nice video, points to ponder are- 1. The K&N technical department when I questioned them directly said they did not claim engines make more power with their K&N air filters fitted, they then went on to emphasise the benefits of the filter being reusable on cost grounds. 2.Air filters are fitted to internal combustion engines to remove dust and grit that is suspended in or thrown into the induction airflow, K&N filters allow far more debris through than paper air filters, this debris then travels into the carb or throttle body and into the valves and combustion chambers, it causes wear. 3. If we are to believe that an air box or intake is restrictive then it’s restrictive effect would be most noticeable at wide open throttle, when the engine is demanding the most air, this points to the probability that at lesser throttle openings a standard filter and intake system provide more than enough air.

Where is the port???? What tool do i need to fix this????

I have a t100…….. and yea, check engine lights all came on

This is probably going to sound like a strange question, but after installation, was there a significant difference in speed?

Not sure why people are taking the front sprocket cover off. Just add some mechanics wire onto the old chain, pull it through. If you ordered a 98 teeth DID 420 chain, no need to break it. It fits.

A Monkey bike has neither the power nor the torque to cope with higher gearing. Yes, it might theoretically have a higher top speed downhill with the wind behind it but in general, everyday use it will feel lethargic and need far more gear hanging than before. Don’t waste your time and money doing this.

Did the rear boys tighten ok? Did you have to bed anything?

No useful information here but good effort.

Quick question, why to replace it?

Subscribed,,, your a normal dude taking on the challenges for us! Thank you for testing and showing how to put it all in!!! Love ya bro

What stand do you use for the bike ??

Are those dji v2 or dji v1? I have purchased the v2 set just waiting for them to arrive and will be using my rapidfire module with them too but i'm curious about something that few guys mention and is that once you lost signal from analog the goggles screen go black out and appear dji logo

Can you please send me the parts details?

What octane fuel do you use for this piston?

The ring is bigger when it's hott.

I can see your phone vibrating really badly, I see in another old video you were saying about the image stabilisation getting messed up on two phones, makes me think twice about getting a handlebar mount..

Where are the mirrors from?

Pretty unhappy with these, they worked with my 900 but not the 1200 xe. With the middle spacer, because I can’t get others to fit, no matter how much I tighten them they spin on the bar if I push them, don’t really seem designed for the bike, don’t waste your money

Even better with the volume turned right down! Why the sound of an angle grinder throughout the video?

You should sell the little bracket for the boosterplug. I would be a buyer.

Did you have to hone out the cylinder? I’ve got a grom I want to run this kit on but some people said I should hone the cylinder out cause the rings might not seat properly, mine only has 500 miles on it though.

The instructions from DHM say the top ring gap should be .007-.008, and the bottom ring should be .008-.009. I understand your logic behind the Wiseco recommendations and measuring the bore, but which would be the better route? Using the DHM provided recommendation, or measuring and using the chart?

I just bought shocks from MNNTHBX the inexpensive ones and they are so much superior to the stock shocks that are not adjustable. Not spending $700 for shocks. Problem with those bushings there is no way to keep them lubricated.

This literally happened to me yesterday when I swapped a replacement clutch lever didn’t take into account the tab on the oem lever for the clutch safety switch. I had to swap the oem lever with the tab to the replacement lever to fix the issue now I just need to clear the code as I got the same code P0704

I originally subbed for the Scrambler content. Great bike, but just too big for what I need. Then I traded it just the other day for a T100 and a set of heated grips. This video was a huge help on the install. Thanks!

I'm curious as to why you used both. DYK that 67 Designs is the original designer/manufacturer of these products and made in the USA (unlike the other ones)?

I just ordered it just now but still think I did a mistake, I don’t plan to mods my monkey other then the rear suspension but just tough about running too lean without a tune , make me regret my decision now

Hire a real video professional (redo this entire thing). The shaky video, short clip segments, unnecessary shots and terrible music won't sell any products. If other people are like me, I came here to figure out what Goose Gear is actually selling (their website does a poor job of describing the product), but the video isn't much help either. Rather disappointing.

First of all, congratulations on your videos, and thanks for responding everyone. I just bought a Yoshimura rs3 for the Monkey, the sound is beautiful, but it's too loud. My question is if you can drive with the spark arrester without getting a headache, if you notice a difference. thank you so much

hello, we are thinking of getting a roof rack and chief products seem to do the job. What size of water system did u install and what size of awning fit on yours. we wanted the 8ft room awning.

So the brake caliper doesnt come off like a normal bike

Hi, are you just using the Rode RX without the TX connected to the camera in this set up?

What was the set up you were using to put the bike on the center stand to take the back tire off? What’s it called…where’d you get it at?

how much oil do you put into the oil cooler including the 1qt crankcase? 1.2qts?

Are you going to wear that engine out essentially turning 3rd into top gear?

unfortunately the linked handlebar is sold out. do you have another link? I love how you drive your monkey through the landscape in Colorado. Are you having a monkey again?

Nice. What is the quad you using in this video.

Did you still like the bars ? After some miles

1 dollar watch. History

I have the arrow exhaust on my xe. Not sure yet on weather that was the right way to go but it is more responsive, just not sure if I like the way it sounds. Been looking at TECs 2 into one,really like the way it looks.

This bike is sick.. Would u be up to sell it?

Very nice. Thank you!

Very nice. Thank you. "You meet the nicest people on a Honda".

Great video! I'm putting some grips and mirrors on my 2023 Bonneville T120 right now. This is very helpful.

You want to sell one of your old intakes:) cheers man really enjoying your channel subbed.

I came across your thread "Grover Build" on jeep garage and I was watching all your videos and then they just stopped. Sometime in 2021 as far as I could tell. I immediately thought "shit, covid got him." So I started searching youtube and found this, I'm glad you made it out. Hope you're doing well. I had stopped my overland build on my f150 around the same time due to lockdowns and loss of job, and then never got back to it. We just sold the truck this week and bought a WK2 summit. Hoping to get back into some light exploring and camping.

How about a ebike dirt bike the moto tec is slow ten tooth 18 mph if i add 1 do you think it would go about 20 mph from 18 I know it ain't much but I'm just asking if anybody would know how much faster they think it would go give me of thoughts guys

Which handlebar do u have on your Monkey and where do u bought it? Greetings from Germany