Video

Apparently even sensor safe slime needs to be cleaned off the sensor as soon a practically possible and cleaned off the inside of the tire when it is patched properly at a shop or if you can manage at home. Sensors are expensive and smog law now or something. Yeah, warn the tire guys about the slime. I have seen youtube of a really cool tire explosion. Must still be out there somewhere.

Quick question..does anyone know if you can buy gaskets for the front ..or must use RTV?

Thank you!!!! Owe you a cold beer or 2!!

Excellent !!! Thank you...owe you a cold beer!!

Thanks for taking the time to do this video. I have to reseal mine and this is very helpful

Helped me a lot, thanks.

how long did you wait from the time you replied the RTV change the time you put it on the housing and what are you estimate the torque that you applied to the bolts with the gun was?? nice video man thanks

Sick!

What a shitty video. List the tools needed.

What turbo you running

So when your ac was not blowing cold air, and the system was full of refrigerant, was your fan turning on when you turn on the ac from inside the car? I’m currently getting warm air, tons of pressure/freon, but the fan doesnt turn on when you turn on the ac and the ac clutch doesnt engage. The clutch was replaced two years ago, so i don’t think that’s the problem. I added an additional resistor to the low speed fan and scotch clipped it to the high speed fan wire (the high speed worked), but the fan still will not turn on when i turn on the ac. Could the problem be the compressor even though the fan wont turn on?

Looks like those liners were cut

Cual color de cable envia los 12 volts? Cual envia la tierra y cual envia los 5 volts?

I am about to tackle this myself. Ended up with an 01 Silverado that was lifted. Has a few little issues. Leaking front diff and 230k miles. Figure it is time for a rebuild. Also need to tackle the transfer case.

I can smell it from here.

I have fuel leaking somewhere on a mower I got for cheap. It's not in the gas lane so I'm guessing it's in the carburetor bulb. Thanks for the tutorial on how to change out the carburetor. 7 years later and you're still helping people with this video

I'm sure it is a great video, but the only problem is I went to sleep after the first 2 minutes. Zzzzz!

Where did you buy your parts brother? Great video but where did you buy all your stuff from?

Where can you find a kit like this to add hydraulics?

Where did you get your hydraulic pump re?Built, but I'm trying to get the whole hydraulic system.Rebuilt.So where can I send?Who can I send it to you get it rebuilt

Where you get your rear and front wheels?

Where did you order the seat cover replacement?

Video was interesting, but for some reason, I don’t see it as being as effective as a battery operated air cleaner for inside of the truck. The set up is much easier just turn it on no drilling holes no modifications needed .

I work on cars and try to my mowers. But guess I don't know too much. I have the same mower except no bag and the throttle is old style on the right with the cable connecting near air filter. And mine has springs on top of carb. This one seems to have none. I am trying to find out how they hook up and how many. And ideas?

Seal part numbers and where did you buy them?

Thanks man. Think I'm gonna give this a go on my Pilot. Great video.

Don't I need to bleed the brakes after replacement??

I have a 2018 Tahoe. The driver side stub axle has a bit of wobble and play to it. More then half of what I’ve found online says it’s normal. Even my local transmission repair shop said it’s normal when I called to inquire. It doesn’t feel normal. I saw someone say the “nut” that holds the bearing on the driver side can be adjusted once the tab is removed. Is this what you would recommend? Along with replacing the beedle bearing and seal? I hope this makes it to you. If there’s an expert in front diffs. It’s you. Thank you.

What is the name of a black piece that looks like a 90? 

If you have part number as few are different they cost 38 thru 50 on Amazon I paid $39 total for mine they cost $185 at most auto parts stores. And yes they made by same company so save money

your video sucked!!!!

Hi, how long does the job take ? thx

Today Les Schwab told me I needed this on my 2004 Pilot…$874. …That sure seems like a lot of money 🤦‍♀️. It’s $232. Each arm …$280. Labor and $130. For an alignment …Wow. I’m hoping our mechanic can do it for less …unfortunately we don’t have a mechanic in the family 😢. Thanks for the video …I wanted to know what it entailed and it seems their labor is HIGH😳 Your video was Very helpful …Thanks again and God Bless 🤗

10 years this video has been helping people build their differentials. Excellent work!

Thanks for the information. This is very helpful. I would however like to take a brief moment to rant at gmc. What an incredibly fucking retarded method for resetting a sensor. I mean it's objectively stupid to have to inflate your tires to the appropriate and safe psi, and then let the fucking air pressure out of your tires to an unsafe operating level in order to reset the sensor. I feel a little better now😊

I saw another video where the guy warned that when you are ready to set the new number by hitting the reset button, DON’T press it more than once to lock it in. Each time you press “reset” to lock in the number it counts it as a recalibration and will subtract from your 6 to hours many times you hit it. I think the guy hit it several times and instead of having 5 left, he only had 2. 😮

Finally someone making a video of a before and after with some proof ... thank you for posting I'm going to get one now

Great video ? What area are you located. Thanks

counting all the sheep in the skyyyy..

everyones know that

Hello, where did you get the cushion?, I need the passenger side and ebay is not selling that seat... can you help me with the brando of yours? I just watch those instructions shows both sides.

so what would i need to replace if the short side has play? just the shaft or does it need tb rebuilt?

Hello my friend. I want you to help me. I have a 1964 Ford Thunderbird. Is it possible for me to find an automatic transmission? The engine size is 390.

Great video. Unfortunately I didn't change the belt immediately after buying the 2004 Pilot, and I paid the price for it afyer it sheared teeth off it driving down the road. Hard lesson.

How to change the motor oil pan for the jeep

your video was a life saver! thank you for posting

Can I ask what was wrong with your machine? I have one and can't get it to work I just get air to come out with no power. I can hear it running but nothing but air. Thank you.

Thanks a lot for the video, but I have a question, is it necessary to put a silicone before fixing the pump or the gasket will be enough?

Thankss

Muy buen trabajo no capto el inglés pero solo con ver el video es más que suficiente para aprende eres un gran maestro