Video

😂😂

Jshndjdjdjxi

Thanks for sharing. I will try building one based on your idea.

F off with this treachery and self-harm!

PRAYAG

Excuse me sir, what materials are you using for this project?

Module ka number kia he

Bhai yah ek botal se ban sakta hai aapane to teen botal use Kiya hai

BUDDY I AINT NO SCIENTIST TO CONNECT ALL THAT. IMA STICK TO MA STUCK AND POKE TATTOOS.

It make a copper

Bhaiya aama ke actor banae deben

Where did you buy the glue gun😊😊😊❤❤❤😘🤙🤟

What type of metal Did you use

I will be waiting bro

Your bro be faithful and if it really works thanks for letting know you are the best to all live long enough

❤

🎉🎉🎉👍🏻👍🏻👍🏻

Eso no dura 10 horas ni loco con una batería de 1 ah

Kiyada

Kiyada

আপনি মেশিনটা কোথা থেকে পেলেন ওইটা কি কিনতে পাওয়া যাবে

❤❤❤❤❤❤❤🎉🎉🎉🇷🇴🇷🇴👋🔥🔥🔥😘😘😘😘🥰🥰🫶

2:46 What is this? 😮

😂😂 bakwas he, nahi chalta paani aage, thodi der hi aata he bas

Op

Sandip kumar

that's OK papus: #define trigger 5 #define echo 4 #define Relay 6 float time=0,distance=0; void setup() { Serial.begin(9600); pinMode(trigger,OUTPUT); pinMode(echo,INPUT); pinMode(Relay,OUTPUT); delay(2000); } void loop() { measure_distance(); if(distance<5) { digitalWrite(Relay,LOW); } else { digitalWrite(Relay,HIGH); } delay(500); } void measure_distance() { digitalWrite(trigger,LOW); delayMicroseconds(2); digitalWrite(trigger,HIGH); delayMicroseconds(10); digitalWrite(trigger,LOW); delayMicroseconds(2); time=pulseIn(echo,HIGH); distance=time*200/20000; } just change the loop how they activate uwu

OE RCTMR TU CODIGO ESTA AL REVEZ >:v

Which diod is used

que medidas tiene lo de las beletas ?

😃😃

Khan befaaltu ke kaam karte rehta hi 🤪😜😜🤪

Nice

cool tank i wish you where selling it

গটওগপগওিহগতবহলহপহজৃকনকনকজংকহপবজনৃ🏎️🏎️🏎️

গাগতর ওআকবজবজব জজবলব নবকবজহআ 🏎️🏎️🏎️

Hola

❤❤❤❤😊😮it work and it so gooood

❤❤❤😂😂😂😂😂🎉🎉🎉😢😢😢😮😮😮😅😅😅😊😊😊nice

How to make the remote? or is there an alternative for it 😢 please tell

Tumne bahut hi achcha banaya hai nice bro

😮😮😮

😂🎉🎉😢😢😢😢😮😮😮😮😊😊😊😊😊😊😊😊मलास

FAKE VIDEO

Hamko ye kar bnana hai kya material lgega

1. Do not EVER solder to batteries, unless you wanna go out in fire or from poisonous gasses. If you miraculously survive, you'll end up with dry joints that will fall off easily. 2. Do not EVER use batteries that aren't PCB-protected for these kinds of projects. 3. Do not *EVER* try what this guy has done at home. You will literally burn your house.

Hey, can you put an image of the connected cables in the parts because they are not seen in the video?

❤🎉😢😅😅🎉😮shth DD

मरम😂😂😢🖕😂🤣😛🤯💩

मरम😂😂😢🖕😂🤣😛🤯💩