Video

Do u mean in the plastic corner trims? No I didn't might of helped me haha

Thank you so much 🙏

Well we have that in common now because I also love buses 😁 happy birthday for Friday mate. I look forward to seeing your bus one day

@@CoastinNOMADS Thank you! And It's great to hear that you also love buses.

Hahaha bro there rare you need a roof top deck to catch em.

Cheers bro

You're a legend thanks mate

Thank you 🙏

Aw I'd hate to find out why. But I do wish I installed it horizontally

Cheers man yeh iv herd about the little tool now. I'd prob just make up my own way of getting it out if I had to lol

Don't know about everyone else but thanks for thinking the mines so over the top 🙏

I like how the sink is sunk into the bench with the board over it, you could do the same with a dual burner gas cooker brom bcf, the kitchen benches in my house are only 450 mm deep sure it's a thinner bench but it's ok, and it looks like you've gone for a 600mm deep bench, in a bus i feel like everybit of space counts i personally wouldn't want to make it feel too cramped.

I seen another clip where someone had a fold up extra bit of bench that would set up over the step into the coaster, only poblem was it had dicky support they had to screw a legg in everytime in two places, they should have made a cavity on the bottom side of that piece of bench and recessed a triangle on a hinge so when it woulf fold down it sit nice and flush.

It's better to still make your own food instead of take away.

Yeh wishfull thinking but we will always have the videos now.

Haha yeh and I hadn't even ran that fast in 1.5 years 😅

Aw mate thanks so much 🙏 Can be hard to share sometimes but youtube is so positive and comments like yours make our day so thank you. I just uploaded a new video. And I finally have a new laptop and a lot if video ideas built up to start creating. I wanna show more of the bus as its so much further along now.

Awww thank you so so much that really means a lot 🙏 So many videos coming I just updated my laptop so nothing holding me back 🙃

Thank you so much. I have a lot of videos coming I just replaced my laptop haha. Yep we do same name. @caostin_nomads

Haha I have a shower curtain over it

Thank you 😊 🙏

Thanks mate really appreciate the comment. We are actually trying so hard to make more videos but having laptop problems all year. Haha thinking of just dropping all my money on a new one lol

@@CoastinNOMADS I can’t even fathom the time effort and knowledge needed to do the videos! So glad you do what you do.

Cheers mate really appreciate it

I did start on that, and then I felt like I was doing more damage and creating unnecessary work, so I ended up leaving the glue with minimal insulation and put the foil board over the top. 100% I treated every inch I could along the way with rust converter, primer, and also white top coat.

Thanks for the feed back mate.

Thanks mate 👍

Thank you 😊 Kinging it is the channel name of the Euro couple in bus.

Thank you. I did silicone around the piller but not the glass I have a neat shower curtain that runs under the ceiling board and hangs over the sill. Actually about to have my first shower in it this arvo haha

100% mate all legit.

Hey there thank you so much. We used 12mm Marine ply from bunnings and I hate it haha. Alot of them are bowed and warped I would go good quality 15mm or thicker for faces. You can get laminated ply I wish I did that. Then you don't have to paint and it's a way tougher surface. Our bus is almost done now. I'm gonna make a video on how I built everything like methods, thought process behind it all and products and materials i used that will be out in like 3 weeks or so

Ahhh see not a plumber haha but thanks for letting me know cause those fittings do ad up if you start wasting them.

Hey mate added a link. If your chasing the same size as mine I searched everywhere again even my email receipt and couldn't find anything to do with 7x9. I think you'll have to search there website. Let me know if ya need anything else.

Cheers big Pete ✌️

I don't think so but you don't really need it. It's easy enough to just measure and mark out. Just triple check the back side of what your cutting and where. Make sure you have you latches ready so you know what size and set back you need for them and also the pinch weld stuff. Allow 5-6mm for that as its on both sides.

Thanks mate. Bikes comin soon 🙌. So if you google bed lift bracket, there are heaps of options, even ebay or Amazon. I payed like 65 plus postage. And they were 60kg struts. I got them degased to 40kg. Now sorta wish I left it at 65 and just waited to see how they would go first. But they work fine at 40.

Shanks

Really?

Yes. Flexible fineliner in a drill. Stick a piece of mastic on the end rolled around the fineliner body. Then variable speed drill. And it pulls it off easily.

Butyl tape. Used for marine. Properly waterproof. A bit of work to get off, but there is a reason they use it; it works. Hopefully if you choose something other than butyl, you don't get leaks and ruin everything inside.

Thanks mate iv got a load of videos and heaps of progress on the bus to share but iv had some lap top troubles haha. Anyway congrats on the bus mate 👍 best thing you'll ever do. And yeh mate I was a chippy in a past life haha. Doesn't mean I know it all tho iv seen others absolutely kill it with there builds lol

Thanks mate yeh i love the fridge it looks so good now my fav feature in the bus by far 😀

The red top Hino engine or the Toyota (land cruiser) one

not the red top hino. It's a 15b fte, 4cyl 4L turbo diesel. Goes really well I'm stoked with the power. Did about 14-15Lp100 on a highway run.

awesome@@CoastinNOMADS

Aw nice good luck with your build mate its good fun and very rewarding when it all comes together. The lights I got off ebay and the exterior lights I think off Amazon I'll try find the links and pop them in description I linked a few other things in there too. I'm thinking of doing another video of how I built everything. Like walk through and just explain my methods.

Thanks so much 🙏. The little one sleeps in the big bed with us but sometimes I'll just jump onto the bench seat to get away when it's hot /annoying haha. We do have a diesel heater to go in when we get to dads house to continue the build. I'm going to run a vent into the shower to make it like a drying room for our wet clothes.

Aw thanks so much thats made our day 🙏. Haha glad you liked the skit with the kids in the first video. 😄

Cheers mate

👌

Thanks bro 🙏

Aw nice yours is very unique that's a lot like mine with the "Y" im Kayne. We spell it Kaia. I'm going to create a kids chanel for her this year I'll announce it on here when it's up.

G'day mate thanks for the comment we hav a cheap little fold out thing that you can put a bag in lol. but definitely the plan is stealthy street camps majority of the time so great tip mate thank you.

Aw nice thanks videos coming soon need to do a walk through of where it's at now

Ahhh so there is an iso switch on there and I used it but one of the old batteries were cooked. I'll have to make sure I keep using it is I plan to stop for more then a day. Thanks for the tip 🙏

Yeh now that I did it this way I could totally just done it myself. If your really crafty make the cradle sit on a slight angle for better access to the top. I think it's like 500 x 400 roughly. There's 2 ribs behind the body just stay between them

@@CoastinNOMADS Thanks for the info. Might give it a go this weekend.

Thanks bro 🙏

Wow thanks so much 🙏 made my day man.

Thanks mate. Yeh 💯 when you can you should.