Video

music is so distracting

Great, now try with the door stop in.

Excellent! Nothing I found easier and better to make mortise on the installed door frame.

I thought the builder was 7ft tall😢

please ditch the music

how do you fix architrave around the door closer?

Omg that music again, Cant be bothered

Can't watch, turn that music off

That was an excellent tutorial fella, Good on ya. Thanks.

The Music is a joke you can't hear him properly !

Background so-called music made me switch off after a minute.

Do you have a video of the jig

Perfect work and great clear guide. Just out of interest, why do you have the bouble nukel hinge on the door frame

What is that noise all about?

Great video - thanks

Ditch the annoying music. Too loud and obnoxious.

Sorry mate, we are in the 21st century and your assembly techniques (quality and execution time) are from the 1970s.

Probably outside of this subject, but do you know if the door does not have a label present if that would fail a fire risk inspection?

You confuseing so top hinge is 200mm from top then 200mm from the center of top hinge to center of the next hinge. Then you said 200mm from the top of the door to center

Why add loud, abrasive music over vocals on an informational video? It's so hard to follow or listen to

I don't see how that intumescent pad is going to help as it is now buried under the hinge, may be it should be stuck to the exposed side of the hinge after the screws have been screwed down. Also when you made the rebate for the hinge did you allow for the thickness of the intumescent pad?

In some buildings there is no need for such an elaborate emphasis on Fire Door requirement, (just my opinion) if occupants of the building can easily escape through a second door leading to an outside safe area, particularly on ground floor rooms, with a second door leading to garden, with elaborate fire alarm and smoke detectors in each room all linked and mains powered with rechargeable lithium ion batteries, a fire breaking out in any part of a building would alert all occupants and each one would leave the building safely through secondary doors, or windows, if rooms were on a upper floor of a two story building they too can escape of there was an extension roof below a window, or if there was no extension roof, an emergency ladder can be supplied to the occupants who could use that and escape. I also found that self closing box if fitted as according to manufacturer's recommended template, the door was very hard to open, some occupants were sick of this and wedged the door open all the time, the remedy was to lower the tension, but there was no tension adjustment so the box was moved closer towards the hinges by 100mm, this resolved the stiff door opening, and the door still shuts properly despite some friction from the smoke seal being air tight.

You never showed the hardest parts how to mark up and recess for hinges, and how deep etc, nor did you show how to trim say a quarter inch off door sides, how to ensure door is matched to a slightly wonky frame

Thanks so much for the background rock music. I would have found the video very difficult to follow without it.

I just finished building the handrail on my deck czcams.com/users/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!

ditch the gloves !

Interesting and informative videos however, why do you have the annoying music in the background, there's no need!

Good job, dose all mortice locks have to be 5 lever to have the box part on the keep to cover fire door regs?

Turn the music off please

Why do the hinges have to be close together if you have a closer

My fire oficer in Manchester told me you can't have a key hole in a fire door, on your video you have a key hole.

I made it with Woodglut plans!

can i hang 35mm door in to 40mm frame using intumescent strip ? Thanks

Interesting video but I wish you would get rid of that irritating "music" in the background.

Very nice thanks

Ahh English English. Absolutely top hole.

0:27 yes but which is which? You don't say.

Song title: "Don't Stop". All I could think was "Please Stop!". Thanks for the video. Ditch the music.

Excellent tutorial

Hi, can just stick intumescent to the frame if there is no grove on the frame?

Good video and demonstration but just leave the packer/spacer in place until you’ve finished cutting out with the router.

Good video. Recommend you lose the music.

why are the hinges placed in those specific locations? Aesthetically is rare

A nice installation instruction video, well dome. Shouldn't the hinge location match that on the fire door certificate? If the door has not been tested with two hinges at the top and one at the bottom, it will not be certified.