Video

@@nataliebonsu2635 so gain structure on your PA really is going to be the main thing as well as the boardgame structure. The idea behind the philosophy is that both of those are set correctly. You shouldn’t have to run your faders at full tilt. So when you need more you have more headroom to push the faders up without pushing noise. If you dont have that ability either your PA is tuned wrong or your PA is not strong enough for your space. I have seen both. Does that help/make sense?

@@EnhanceDontDistract yes, that makes sense. So essentially it’s okay to not have your fader at unity but also shouldn’t be at a low level ?

@@nataliebonsu2635 correct. You want to have room to move up or down.

@@CalvinBergsma thanks. Really hope this is the case for most people to see Jesus from us.

@@ArashTaghavinik lost as to why an editor helps with likes on a platform

Honestly We have not really messed with it in a while. It is frustrating all of the money changes they have made

@@yourinspirationalnetwork513 what are you referring to?

Hey! This is Anthony. I consider all options when configuring customer systems, AMD and Intel, it just didn't seem to come up in this conversation, but I could talk about this topic literally all day. Since the Intel's switch to big.LITTLE architecture, I have really enjoyed the stability of Intel systems, but you are right the high end chips (like the 13900K and 14900K) have proven to be less stable lately. In the early days of Ryzen they were exceptionally sensitive to RAM choices and speed, and ran quite a bit slower with a lower clocked RAM modules, but crashed with higher clocked modules, so I stayed with Intel, until now with Intel's stability problems, AMD is more of a stable choice on my list. My next personal build is most likely going to be an AMD 8000 "AI" chip, which is what I use to validate higher end hardware for customer use. I am certainly not loyal to one company and choose what's best in the moment for customers. Such as ASUS, which I've stopped selling after they have proven to not stand behind their warranty program and when called out, they didn't have a good answer. So until they do, I won't be selling their motherboards.

@@Th3_ArCh0n I enjoyed your discussion. Very humble and knowledgeable. As with Windows, I believe AMD have come quite a long way, and although still a company that wants to make money and be successful (obviously) I think they're far smaller, and in many ways less evil or "greedy" versus Intel, Apple, nVidia etc. I am still unfortunately pushed to nVidia simply because, for certain apps, they're just better, and their driver team is far larger and therefore, generally their drivers are more solid.

@@damienlobb85 Thank you! I definitely only use nvidia for production systems, but like everything, I am open to AMD making a great product. I have also been testing Intel A380s for lower requirement systems, especially for OBS and streaming systems, as they are the cheapest way to get into AV1 encoding.

You should be able to toggle back-and-forth and so what I would do is go to your originals at the very beginning and make sure that they’re all synced up and then switch back to the proxies for the edit. Second, I would probably set everything to the same frame rate so that you don’t have the same issues and the same sample rate for audio

@@EnhanceDontDistract thanks you’re right it might be a frame rate issue

@@siskoandamikepodcast i have had it if the cameras are 24 and the atem is 30 it will drift over the length of the timeline. Same with audio if cameras are 48 and atem is 32 etc

Yeah I agree. I have had very little issues with very simple set ups with the 8gb mini but always suggest 16. Anthony is a pro at builds thats what I was trying to say as you can’t have just anyone build one. Thanks for watching

It depends on the system that is in place. I have had it and not it depends on the flow.

@@EnhanceDontDistract Thanks. Wasn't sure if there might be some other tips to address that, which might have been aware of. Your video has been very helpful.

@@jmsteuhl thanks. Your network will be the largest part of it. Next would be the computer sending then computer receiving. Also mind dropping a sub to the channel?

Get a USB-C cable plugged into your computer shows up as a black magic device once you download black magic video from black magic support website

We talk about that. We have also still had it force update on us

But I have also notice that Microsoft is putting some fail safes in if you turn windows update off.

Windows is 99.9% the same as the MacOS version of Pro7, but if you want that 0.1%, you want a Mac. Btw, something to correct. Pro6 WAS written 100% in house for Windows, BUT they used some libraries and other stuff that were 32-bit and so the whole thing had to stay that way. The Mac version of pro6 was 64-bit.

Of course, glad to help. Mind dropping a subscription

Legally, you are required to put the copyright information from Cc up for every song and put your license in the description. CZcams is not recognizing the license in the description anymore so you may still get flagged but at least you will not get shut down at this point.

Thanks he does voice overs for a ton of people. Drop a sub if you dont mind

Thank you and you’re welcome

Nice

Check NDI viewer and see what the ndi feed is showing

@@EnhanceDontDistract I am seeing the camera with the NDI QR code.

Also what should the Alpha type be set to? Single or Pre multiplied?

I found out why the QR code. Its the code to remote view NDI. The PP NDI source isnt showing. I guess I need to figure that out.

@@dannyhackworth8575 i would burn it to the ground and start over. I would also use a straight alpha

Check NDI viewer to see if you can see the NDI stream coming from pro presenter

@@EnhanceDontDistract hahaha I worked it out. Silly me. I didn't realize the order of sources in a scene in OBS mattered. I had the video capture first followed by the propresenter NDI source. I swapped them around having the NDI source on top and now it's working!

@@bobturla good to hear!!!

Mind subscribing?

What kind of songs?

@@EnhanceDontDistract hi, thanks for your quick reply, I'm looking for Christian songs , Hillsong, JESUS culture, charity gayle, kari jobe Michael W Smith, Israel, Darlene zschech, ETC

@@sharonlima700 you wont find one for for those type of music I would suggest something long lines of like sound stripe or artist to get some really good on lyric audio for your videos. They do have some “”house of worship music “” that sounds very Christian for your online video stuff.

Thanks again for quick reply, I'm new to this so I don't know what you mean, I will keep praying about it , as I wanted to use Christian songs to do longer viedo rather an 1 minute shorts on youtube, but thanks again and GOD BLESS

Im not sure. Would need to check the audio profile. They are (rode) pretty slow to update things

Alright, thanks for the quick reply!@@EnhanceDontDistract

@@112spotterhaaglanden8 of course. Mind subscribing?

No, check your drive and cable if yours does

You can get a usbc to ethernet adapter

Im confused by the question.

@@EnhanceDontDistract how is the road after and atem mini pro iso connected ? I see you demonstrated into the mic 1 input on the back of atem mini.. what input slot on the back of the rodecaster pro are connected to?

@@jKHAHN215PA there is tr outs of the road so i have a dual tr to 3.5mm trs on the atem in split mode for true stereo

No we have pocket cameras full size hdmi

So all the outs send the same information. So when you tell the converter what camera it is the software sprays that to all sdi outs (minus aux outs and program) for the control.

@@EnhanceDontDistract I said before "I had no idea" when it was suppose to say "you have no idea" lol I was so excited I didn't pay attention to what I was typing... this video solved a major headache with our 2 M/E Constellation switcher

@@MiguelReyes-sx1vs all good man glad to help. Hit subscribe if you don’t mind

Not sure

How many cables have you tried? I have had bad brand new cables. I would get a dual mono 1/4 to 3.5m trs cable and split the audio to left right in the atem as well

I had the same problem the first time I bought my atem. Audio for me is as important as video. Those atem 3.5mm inputs are just not it. My setup includes all my routing audio through a dedicated sound interface (Zoom in my case). No fuss; it just works. I know it’s another layer to keep an eye on but if rather do more and get exceptional results that ask for comfort at the expense of bad sound.

@@ahajonathan yeah we multi tracked the audio on the rode an synced again after but it made it easier to have the audio embedded on the video

@@EnhanceDontDistract I'm having exact the same issue, audio from the RCP coming trough a split LR cable wich is 1/4 in one side and 3,5 in the other, only one side is usable of the embeded audio recording. new cable, new hardware, everything. What solved in your case?

@@paulojbudny when you say one side is usable, do you mean like only audio comes down one side or one side is bad and one side is good and one side is bad?

I stick with the belkin thunderbolt 3 as it handles all the speed and is universal for usb c and thunderbolt devices

Yes, gain is first thing you do.

Setting gain have been told to shoot for 0 is that a good umbet or should be little lower?

@@raycarroll9664 analog zero I believe is -17 on the sq series. Just below zero. I think if you are in between -17 and 0 you are in a good spot.

Thanks

@@raycarroll9664 of course. Mind subscribing?

I got you one

Yessss thank you @@EnhanceDontDistract

What do you mean?

You need a server for what?

For the rodecaster its 3.5 to 1/4trs