Video

Yes! Without a problem! 😎

Yep! I printed a 24” x 15 sticker on this printer and I used my Silhouette Cameo 4 pro (24”) to cut it out. It prints the registration marks without an issue. 🌸 I just set my work area or cutting mat to 24” x 24” on my silhouette studio software.

Oooo! Interesting idea. Never heard of it printing on magnetic paper! How thick would that be? I know that I can print on 300gsm paper which is pretty thick cardstock- but my only concern would be the print finish on the glossy side. Since this printer is Inkjet. When I printed on poster board paper, the paper had a slight gloss/wax feel to it which caused the print to come out slightly wet. But I set it aside and let it dry, and problem solved. Now, how big are you looking to make the car signs? Because if anything, you can always go the sublimation route. They have an F series that strictly for sublimation and it goes up to 24” wide… but that’s something you may have to really think about. It’s pretty simple to sublimate onto magnetic sheets- but you’ll then Have to worry about buying a bigger heat press machine which equals more money- which is probably the opposite of what you want to do. Lol I’d do more research. But that is a brilliant idea!! I’ve heard UV printers are pretty great with printing on anything- including acrylic sheets, glass, plastic, etc. DEFINITELY HOLD ON TO THAT IDEA, it’s a great one.

Unable to see them in description

It’s a GlowForge Plus laser cutting machine

Maybe I will one day… 🌸

Great idea! Maybe one day!!! Do you mean like every piece?

Thank you beautiful! Much appreciated. 🌸😊

Yes it does! The specific canvas it prints on is polyester canvas. The one I used I got from Amazon. Heres a link to a video i made after 'Test printing on 5 paper types" -- The canvas test print was included here. Hope this helps: czcams.com/video/G-6xto_ibek/video.htmlsi=3AaA2E23DEvoZ4vF

​@TheFreckledCraftsStudio thanks, is that Canvas durable? I want to get into the printing and selling not sure if this is good approach. Any thought?

@@michaelgyimah9731 in my opinion it is. Its a great quality from what I've seen. Its great when I fold and staple onto the canvas frame. But when you say durable, what do you mean? If it smudges, rips or stretches? I recommend doing some more research on 'large format printer canvas rolls'-- They may have different canvas rolls that may be exactly what you want. It also depends on the kind of printer you have.

Yep!! Although this machine doesn’t specifically wind it on, you can put it on manually. 🌸

Which image? The floral or the stand? I sell the stand and the floral design svg file on my website. www.thefreckledcraftsstudio.com/shop/The-Chapel-File-p601076395

😂😂😂 girllll!

Depende de lo que estés imprimiendo. Cuando compré la impresora por primera vez, venía con cartuchos de tinta y me duró 1 mes, solo porque registrar la tinta fuera de la caja hizo que la impresora usara aproximadamente el 50% de la tinta. Después de ese registro de tinta, la tinta me duró aproximadamente un mes completo y no imprimí con tanta frecuencia. Recientemente reemplacé los cartuchos por otros nuevos y estoy haciendo un seguimiento de los niveles de tinta. Hasta ahora he impreso algunos carteles de 2'x3' (en color) y un par de stickers de 24" por 24", mis niveles de tinta no se han movido ni un poco. Todavía lo sigo siguiendo. Entonces no puedo darte una respuesta concisa. Espero que esto ayude.

Thanks! Great question. I’m 50/50 on that one because firstly, I’ve never tried it and secondly, grease proof paper, which contains some wax- may not hold the ink too well. But!!!!!! Maybe try taping a piece of wax paper to regular printing paper, try printing and allow it some time to dry. Maybe that’ll work. I can try it here and let you know how it goes!

Thank you!!! 😊

Hey!!! I used this one: amzn.to/45y8hS9 - got it on Amazon. I’ll definitely make more vids for this printer! Stay tuned 🥰

You are so welcome! I’m glad it was helpful 🌸

Thank you! I’m glad you found it informative. So, I’ve only had this printer for a few months now. When I first unboxed it, the printer came with ink cartridges- and I used those cartridges for the whole “ink registration” process at the beginning. After the ink registered, I was left with less than 50% of the ink (all 4 cartridges) - So for that first round of ink, it only lasted me 2 months (I barely printed with it)… I recently bought new ink, and I’ve been keeping track so that I can have that information for myself and let you guys know too. So far, I’ve printed for a few weeks and my cartridges are still full. I hope that helps, but I definitely will keep you posted.

@@TheFreckledCraftsStudio Thank you so much for the detailed response!

You’re very welcome ☺️

Hey! So I recently made a “how to” video for another neon sign (which is part of my collection) called “Heroes and Villains.” I go into detail on how I made it showing a step by step process. Here’s the link for that video: How to Make a Tabletop Neon Sign | Home Decor | The Freckled Buildher czcams.com/video/jIV1LjLsHds/video.html

@@TheFreckledCraftsStudio great thanks 👍

You’re welcome! Let me know if you have any questions. Just ask it under the other video. 🌸

Hey! Thank you so much. I bought these from a friends website but she no longer sells them. You can find these wires on Alie Express. They’re called: Silver Color Enameled wire LED Neon Light Welding Wire. Here’s the direct link for them: www.aliexpress.us/item/3256804701519289.html?spm=a2g0n.productlist.0.0.e27a207bUKuHZ2&browser_id=aaded899068e4aa5b68ed9f2fd1cc593&aff_platform=msite&m_page_id=zgnyhqiglycawqhz190126555f61af23e961e8b003&gclid=&pdp_npi=4%40dis%21USD%214.86%210.99%21%21%214.86%210.99%21%402103080517182955539018403e2663%2112000037397250474%21sea%21US%210%21AB&algo_pvid=2ccd9d0a-4941-4484-a84c-8237ca1e54d9&_universallink=1&m_page_id=zgnyhqiglycawqhz190126555f61af23e961e8b003

@@TheFreckledCraftsStudio Thanks so much!!

You’re very welcome.

In a week or so 🥰🌸

Do you mean that instead of stamping with rubber, you’d be stamping with acrylic?? That actually sounds interesting, would be interesting to see how that would turn out. I don’t think it would work as good as the rubber, but you may still get a similar shape (stamp) when pressed. Also, the acrylic may not hold the ink as good as the rubber does because acrylic has a slight shine to it which causes ink/paint to not completely cover it … I’m actually going to try that! You may be on to something! 😂😆

Hi!! Yes you can. I’ve printed on Cardstock with this printer. I have not tried printing on 300 gsm, the highest I tried printing on was 230gsm. But yes, You can. This printer can print on a variety of materials!

@@TheFreckledCraftsStudio Thats helpful.. thanks 😊

@@HARSHINI243 You're very welcome!😁

Hi!! Yes you can. I’ve printed on Cardstock with this printer. I have not tried printing on 300 gsm, the highest I tried printing on was 230gsm. But yes, You can. This printer can print on a variety of materials!

No. I used my 24” silhouette vinyl cutter to cut that shape. But that would be cool if it could do that 😆

@@TheFreckledCraftsStudio I didn’t know the silhouette have that big size cutter I have the regular cricut, no the venture …. Thanks for answering me

You’re very welcome ☺️ It’s called the Silhouette Cameo Pro

Hey girlie!!! The printer was a gift from my husband-- he bought it directly from Amazon. I LOVE this printer. It's a pretty great printer once you learn your way around it. my only "con" is that it doesn't do borderless printing, but it's not a deal breaker for me. The majority of the stuff I print are slightly smaller that 24" any way, so I usually end up cutting off the edges. Other than that, the printer is awesome! The vividness and quality of the colors/print are top notch. I don't have any complaints. It prints on many types of papers. brochure paper, regular copy paper, poster paper, vinyl, banner paper, canvas, scrim-- thickness can go from 20lb paper (copy paper) to about 300 gsm... and the fact that it holds 17" to 24" wide rolls, is also great. Thats my honest take on this printer. Let me know if you have any other questions.

Tha ks for responding. I appreciate you

@@mrsphenomenalcreations1343 My pleasure 🌸

You're very welcome! I’m glad it was helpful 🥰🌸

Thanks friend! & Yep, it does. To protect your print, laminating it would be the way. What are you making?

@TheFreckledCraftsStudio I'm interested in making posters & and printing pictures on canvas, but I'm considering this printer or an eco solvent printer. I just love the quality of Epson printers

@@alvarohernandezEVO Nice. Yea, as for quality with this printer, SUPERB! Great quality on canvas, as you saw in the video. Sticker paper, scrim vinyl, poster paper, and a couple more. I love it. Hope you find what you’re looking for. 😊👍🏽

Thank you! Keep it up, you're doing a good job

You’re very welcome! & thank you, I truly appreciate that 🌸

Glad it helped! You’re very welcome ☺️

Yep!! It can. They actually sell scrim vinyl rolls for these printers. FastPlot Outdoor Scrim Vinyl Banner- Waterproof 15 mil 400g - 24inch x 60ft Roll - 2inch core

@@TheFreckledCraftsStudio welp that just sealed the deal for me I’m buying it❤️❤️❤️

The cutter is built into the printer. Theres no separate cutter. Prior to printing, you can check the “auto cut” box to have the printer cut after printing.

I responded on your other comment, take a look. 🌸

Hmm good question. So far I have only printed on 90-170gsm. So I’m not too sure. I did some research and found that this specific printers may print on poster paper that’s 300 gsm

@@TheFreckledCraftsStudio thank you so much. On its spec is says .27mm which is normally around 250-260gsm depending on the paper. But if upto 300gsm, that would be amazing! I will mainly be trying the weight within its spec anyway. But it’s great to have the option. You are a star! ⭐️

@@meejay100 you’re very welcome! Keep me posted. 🌸

Lol! The editing for this video took me soooo long! 😂 I’m surprised I still have hair. Also, I’ve been uploading more shorts than these tutorials. I appreciate you! 🌸

I used the 3m command strips. Link: amzn.to/3xeGc5e … held it up until I finally took it down- about a year or two.

Yes. The paper settings should be changed on the touch screen as well.

@@TheFreckledCraftsStudioThank you for your quick response!

Glad it was helpful!

It takes me back to simpler days lol

Yes, absolutely! It can be adjusted to fit a 17” roll 👍🏽

Most welcome friend! 👍🏽

Sorry you had that experience- it wasn’t my experience. Maybe they sent you a faulty or refurbished product?

Thank you! Cheers!

It took longer to cure, but it eventually did. With these weaker light strips, it took 3 full days to cure.

Also, if you’re going to do jewelry, I highly recommend getting a nail uv lamp. They work really good. I use them for small jewelry.

If I’m not mistaken, yes. I’ll actually try it out to see. I’ll keep you posted.

Well, I have an older video on here making my very first tiara. Since then, I have kinda perfected it and haven’t made an updated version of the tutorial.

I lovvvve these! Too cute 🌸

Thanks! 😊

Thank you so much! Really appreciate it!

Hey! All the links for the papers used in this video are in the description box. Thanks

Hey! Sure, I can clarify. So I designed it on the ‘Silhouette Studio software’ (font, swirls and word placements) then printed that design out with my sublimation printer (Epson eco-tank)

Sorry about that confusion, just rewatched the video and saw where I made the mistake. So both “Procreate & Silhouette Studio) are softwares I use to create designs. I use Silhouette Studio when printing. I was supposed to say “Silhouette Studio” instead of “silhouette” … did that help?