Video

Thank You 🙏!

Good handwork but : 1) magnet air gap not cleaned? 2) would it be better if ferro fluid was added?

😂😂😂😂😂😂😂

sanki büyük orta yollu bir hooperlörden dönüşmüş bu tweteer gibi geldi bana.

🤗👍💯🔥

Sicuramente non sarà uguale il suono, e anche l'impedenza, la cupola originale è rigida, mentre la sostituta è morbida

awsome job i redid a foam surround and suceeded.i think i can do a tweeter i have one blown out on my pioneer ARIA 50.

Good job

How u charge for this repair. I have same tweeters that needs repair.

hi can you tel me size of coil in mm ? best regards

Зачем же нужно было так потрошить пищалку.Я более 50ти пар восстановил таких высокочастотников и у самого имеются Technics sb-7000.czcams.com/video/7dtuvAvxnvM/video.html

Тоже мне мастер, убил пищалку 🤣🤣🤣

Hi, I would like to ask a question: I have a poorly repaired tweeter. They removed fewer copper coils, they can make it sound 4db - it should be rewound, would it sound like before? happy to hear your response, thanks

Hi, I would like to ask a question: I have a poorly repaired tweeter. They removed fewer copper coils, they can make it sound 4db - it should be rewound, would it sound like before? happy to hear your response, thanks

Sorry but this one has ferrofluid ??

If you would have measure the travel @ 90 top to 270 at bottom, add that sum and divided by 2. Then 180 to 0 left add the sum divided 2 you would have found the centers for the voice coil eastly . Sum1 + Sum /2= center

It would have been nice it you would have let us know about the glue and cleaners used instead taping the bottle.

Nice job!!!

good evening, can anyone explain to me how to open the midrange of the ar90 code 200028

I have a pair of SB-7000 but they are missing the tweeters, is there any replacement for these tweeters which works with original crossover? Thanks!

When he lowers on the dust cover with tape 📐🔬🧪

What would it cost to have one repaired?

Isn’t beryllium toxic to work with?

What a light touch. I have damaged the surrounds on multiple pairs of speakers just being a clutz. I admire your fine touch.

Perfection in work ..Very good ..

I have jbl l100 speaker .. Wanted to refoam speakers and location is India , mumbai .. how i can connect with you ..

Great video. Thank you! I just acquired a pair of AR18s and one of the tweets need some work. I've never done a tweeter before. What did you use the release the adhesive on the cone and soften the ferro fluid? Did you replace the ferro fluid?

❤

Молодец, мужик катушку перемотал, вот когда мотаешь транс с двухполюсный с шестью обмотками примерно таких же размеров, вот там прикольно. Но дядьке респект!

Is there a benefit in not replacing ferrofluid? I noted the old ferrofluid was removed but no new fluid was put in

What black sealer did you use on the dome?

Do a 3a midrange please

Done 6 and the sound pretty good for the cost. It is tricky to center. I used a slow tack white adhesive. Is ferrofluid a bad idea?

Hello, did you glue the spider on the coil and on the magnet? It's not obvious on the video. Thank you a lot for your reply.

Great Video👌! Thank You😁!

Хотел написать про рукожопого мастера, но опоздал

Where can I get the tape

Do the focal berylliums have a unique sound signature? What makes them so expensive and popular besides the name and material used? I have Paradigm with the GPAL tweeters. Curious.

Can advise how to repair the silver colour dome? Any video to show how it dismantle from the speaker?

Hello, did ou get the repair kit yet?

OK, here we go again! What the hell is the blue stuff?!

What is the setup for this video? What is wrong with the driver, to start with? We can hear a mic, how about *speaking* and letting us know the background? As is, it is a complete mystery why you took that driver apart......sorry.

Hello, where can you get the foam and spiders?

professionalism my friend.. I have a question .. is it harmful if you play a damaged car beryliium tweeter .. or do you have to replace it immediately?

It appears after 9:40 the tweeter surface appears to have been damaged towards the bottom portion of the dome near the 'beryllium' text. I think maybe pressing the dome outward with the finger may have caused the adhesive that was still remaining on the rim to pull and deform the beryllium edge. I recently had an accident with the tweeter grille cover on a focal alpha 80 evo in which the strong magnet in the tweeter pulled the grille from my fingers towards the aluminum inverted dome and created a small dent that has had no audible effect as far as I can assess, and I've done extensive nearfield listening. I ordered a new tweeter assembly from my local Focal dealer because the cost was reasonable and the speaker is brand new. Thank you for posting by the way, not often you see such a masterfully made piece of start of the art technology and the small tolerances in which it operates.

Do they sound the same after the replacement? How do you un-glue the dome without damaging it?

Fantastic work my ones needs this rapier but i can't even try to many tools involved. Thanks.

Yay, you saved it. Just a thought - maybe you can use the faceplate to center the coil.

I dropped my DQ-10 midrange off to be fixed because of the same problem showed in your video. I know you know what you are doing. But, every time you used those tweezers I was screaming NNNOOOOO. I could not of done this fix myself. Good job.

Jimi Hendrix's favorite speaker I understand. Used to blow them out regularly apparently.