Video

Dobry filmik ale miejsce ulokowania prysznica niewłaściwe. Powinno być po przeciwnej stronie niż strefa wypoczynku. Takim sposobem jak ty to zrobiłeś podczas brania prysznica będziesz miał kałużę lub błoto w miejscu gdzie rozkładasz cały majdan tj. krzesła i stoliki.

Hey guys, been following you for a bit and you are very helpful in passing on your tips and knowledge. Would you have a link for the 6ga. pin connectors for my dc to dc charger, I have the earlier model Orion-Tri Smart. Thank you for any and all help.

Those settings would be useful if the voltage reading of the bms was real, not 0.3-0.5V off which is critical. Already ordered JK bms , and will throw daly

Hopefully you can do a video on ways to add more VE direct cable options. The cerbo GX only has 3. I'm running 3 x 100/30 MPPTS, 1x Smart shunt, 1X Orion XS 50 DCDC, which all require VE direct. It's seems I need to purchase 2 x USB to VE direct from Victron, the expense keeps adding up. More VE DIRECT ports are needed in the cerbo. I see the octo GX may be the better option If I hadn't purchased the cerbo GX. Quote*. The Octo GX is a member of the GX Product family. The Octo GX is the best fit for installations that have many MPPT Solar Chargers, as it has 10 VE.Direct ports.

Thank you for your time, I wired up my multi with two Ac outputs to two different circuits and was perplexed why I had no ac on #2, Now I know. Great Work

They have issue none are perfect🤷

Hello. I can’t chance my battery, I have lipo but the only option that I can choose is the “Victron gel” when ik choose lipo everything stays light gray, so I can not save these settings. Can you tell me what I am doing wrong?

Thank you from Ukraine! Very useful video now in our country. Very competently and beautifully done, I will do the same myself, I also have 304A battery EVE but 8 cells.

how large is the water tank? this vid is so sick

Could you dab a bit of loctite on those small screws to give extra security? they are very small screws.

Thank you for your video! What kind of charger is that 70A charger? I've been looking for ages to buy a high powered 12V charger... THX

I’ve been looking at these, great clarity in your presentation

YOUR TEST IS STUPID!!! YOU TESTED 3 DEVICE. WHY VICTRON IS CHOSEN AS A REFERENCE?? THERE SHOULD BE SOME DEVICE THAT IS REFERENCE, NOT ONE OF TEST SUBJECTS!

LOOKS LIKE VICTRON IS GARBAGE. HOW CNA IT SHOW INCORECT SOC?? IF IT HAVE TOTAL CAPACITY OF BATTERY IN AH, AN DMEASURES HOW MUCH AH PUT INTO BATTERY AND HOW MUCH TAKEN... IT'S EASY MATH. CAPACITY - USAGE = SOC.

SUPERB NAME OF COMPANY - Junctek ... aka JUNKTECH :D

I'd like to have a case like that.

Does 3.65 volts mean 100% charge and 3.4 volts will charge the cell to 80%? Or are 3.65, 3.5, or 3.4 volts the charging speed of the cell?

Sad efeort, rawply wood, stupdmistake with battery, should have had portable battery box roll in abc charge, no reson for hiur mistake buy a clamp meter. No fikter and could have doubrsater available. Stupid full of excuses

I have a 48v 100ahm lithium battery. What battery ahm should I set?

Question: I've been looking at setting up a battery bank for my Campervan, Why is it everyone says you cant use a 20s JK BMS for 12 or 24v? Why can't I hook up say 16 cells (280ah) in a configuration of series and Parallel to make 12v at 1,120Ah Is it the configuration of series and parallel that the BMS can't read correctly? Would I then have to use 4x BMS's each connected to 4x Cells or is there another way to just use 1 BMS that controls the whole lot? Cheers for the information, love the content!

Thanks for the video. I have a JK BMS as well and use it for a LiFePO4 4S battery. When I compare it to my JBD BMS and leave it idle (only battery and jk bms) for about a month, I notice that I lose a significant amount of AH with the JK BMS, whereas I don't have this issue with the JBD BMS. The consumption of the JK BMS is dramatically high. Is there anything I can do about this? I have used two of them, and both have shown this problem.

Is that 2000va not kw?

does the image works for Raspberry pi 3b+? thank you.

Have Gen2 and original router made to 12 volt. Litium battery and solar panels, never had a problem since 12 month It is on my boat and always in flat position.

Для подключения к телефону запрашивает пароль который я не знаю как мне быть? Можете помочь?

August 1st lithium batteries, inverters, and solar panels have 25-50% tariffs added

Good simple vid. How would you install it on an isolated version of the DCDC charger

Multiple buy AT docan . Every Time get full capacity .

I bought a 12 12 30 isolated Victron for my Land Rover. However i want to enable the victron to be bipassed when winching so i can get max amps from my two batteries. I used to have a VSR relay wired via a switch to enable this and it also enabled jump starting of the main battery in emergency. Is it possible to have such a set up with the Victron as i do like the fact its topping up my second battery much faster than the VSR did. Thank you

what is modify pwd in time ?

Thank you

Gen2 dishys take allot of Amps on boot. You might want to experiment with a desktop PSU and set to 13.3V and vary Amp as they seem to need more than 5A to boot and stay on.

Looks like the 280ah cells you tested are ESS Rept cells while the 230ah cells are EVE cells. Please confirm

Use a transfer pump for oil, much easier and quick.

New diff seal used? If not, trouble for later.

but that is still expansive , i mean if those 4 battery for a price less than 250 $ , i think it worth the efforts

That's normal for them to swell they all do it, The electrons move under between the plates making expand then as cell discharges it gets narrow again, nothing can stop that you could squeeze them together but when it charges back up it expands again so why bother squeezing them just made more cell movement.

What if the BMS shows up as an option to pair device, but won't actually connect? It does not show up in the SmartBMS app, either. Full disclosure: I misunderstood what I was looking at for instructions, and connected both big leads from the BMS to the + and - of my battery pack, which would typically be a short circuit, but it did absolutely nothing. Or so it would appear after two weeks of it connected that way. Now, with the big leads going where they should, I'm having trouble connecting the bluetooth module...

Nice, but you do realise that Victron actually recommend not to use ferrules on there MPPT's.

before you have to get through all this rambling about nothing....the simple answer is NO you dont need a DC to DC charger. In reality the answer is YES. Your car alernator will not output the 14.2-14.6 volt needed to completely charge your lithium battery. In most cases you can use the 12v source of your trailer plug if you stay under about 20 amp of charging current. If you want to run a 40 amp or higher output for charging you have to make sure that your alternator will support said load. You also have to run cable directly from the alternator if you want to use more than 20 amp. Victron has a 12/12/18 charger that works perfect. Your battery also needs a Shunt. You also should consider that the dc charger will get very hot during operation, even more so the 40 amp units.

Replacing my Renogy 60A one with this Orion XS 50A. I already have 2 AWG wires - can it fit or do I need to hook that wire to a bus bar and then an 4AWG from the bus bar to the charger?

Can you please test the Bluetooth range and post a result in a comment here?

I have the screws that touch the rotor and i have bad noise!😢

You need to qualify the amp hour calculation for newbies. If you put batteries in series, you don't add the Amp hours you add the Voltage. If you put batteries in parallel you add the amp hours. In the example in the video a 12.8V (4P) system is 1120Ah, a 25.6V system (2S2P) is 560Ah and a 51.2V (4S) system is 280Ah.

3.0v is too low for balance start. That will overwork the balance circuitry and potentially cause a large imbalance or other issues. 3.375v should be the minimum.

in my short Microcamper the 4' run from my starter into the charger will be 4awg copper, but okay to use existing 8awg copper OUT of the charger to the house lithium for a 7' run?

Did he say he went to discharge the pack down to zero? Wouldn't that damage the cells? Bottom voltage for lifepo4 is what 3v? 2.8v? 3.2v?

Which male to female HDMI CORDS are known to work well with the touch 50? A certain grade or gold plates, branded ?

Very good! Thanks.

Very good! No mention of the earthing? Isolated/non Iso..Thanks