Video

This looks like a job for someone that knows what they doing

I start the fill with the drain still open and when the fluid runs clear i close it and fill it up.

Great vid. Thanks.

Sup brother thanks for the great content. I used your tear down of the LT1 for my Camaro maintenance. Appreciate you making videos like this for people.

This really needs closeups. If it makes longer to shoot and edit, so be it.

Good way to ruin your crankshaft and or new pulley… never ever put a ratchet strap on or with any pulley… good video, bad technique

Legend, very helpful!

I thought these cars had a pan or under side cover that covered all the underside??

Hahaha! Impact guns it on THEN tightens with a damn breaker bar AND Lock Tights it! Simpleton.

👍🏽

Is there any need to put a limited slip additive in them?

Is the frame shown from a 2WD? These won't work on a 2017 Ram 4x4. They hit the frame on passenger side. If only the frame was 1" out at that location. I stopped and did not check the driver side.

e- socket

Thanks for sharing ❤.

My Kong sets up the same, I also put a blanket on the back end so it more like a cave, my dog loved it and left the blanket alone.

Excellent vid ... best I've seen yet

What the torque you jused ? Thanks for video by the way :)

I find when I'm screwing it, it gets looser and looser 0:34

Thanks for comparing the difference between the old & new spark plug.

Your system is actually wet sump you have two oil plugs not 1

terrible video , you didn't explain your self you didn't show how to do anything

Thanks

Bad idea

What about that red clip?? Does it just pull off? I pulled mines off and hear a vacuum leak like it's sucking air.

Dude, you made this look so easy.. I thought I could duplicate .. Spent 4 hrs.. That "Front Clip" OMG... But I got the results ..

"Serpent Time" thanks for video

Great video. From pulling out the engine to new start up how long did it take you?

Are those torque specs Nissan specs or the lube locker gasket? Im gonna use rvt so I was just curious if it would be the same ft/lbs

The dog is a distraction

was super confused at first why you pulled the plate off on that last bit covering the spark plug area with no context or video of you doing it

was super confused at first why you pulled the plate off on that last bit covering the spark plug area with no context or video of you doing it

Thanks so much man ❤️

All this to change spark plugs. Ridiculous. I’d like to get my 81 Camaro back please. Could change plugs and wires without taking anything off.

What type and sizes of screwdrivers were needed to take it all apart? Thanks for the video!

Hawk thua

Appreciate the video. What is a good budget dashboard cam?

Will this deck still operate the 6 disc changer?

ALWAYS start by loosening the fill plug first. Reason being, if you drain out all the fluid first, and then you cannot open the fill plug opening , you have got yourself into a scenerio where you cannot refill it. If the seam where the cover mates with the differential housing is not leaking fluid, leave it alone. Popping off the cover may create a new leak path that you did not have before.

Your video is shit,

Hey ghostly. I've been going through your C7 videos. I'm sorry bud. I can appreciate your positive attitude, but maybe just scrap any parts associated with this used kit? Might be safer? I'm probably very late in discussing here. Been in the performance car world a while and I just would not trust one thing about any of this kit. I can only imagine the lack of any fitment on these parts as you try to install them. I also weld fairly decent. Just Damn. those welds remind me of the first day I picked up a MIG. I can't imagine they knew what a TIG was. I'm guessing Pro charger is just not the route you wanted to go? Turbos are awesome. just not much room in that C7 for one. (or two) without huge modification to most of the parts around the Motor itself. Well, I wish you better luck and happy experiences moving forward. You deserve it.

Thank you greatly appreciate 🙏🏽🙏🏽

Awesome. Thanks!

I wish I had seen your video 5 days ago, I just went to the shop someone else did it for my YJ Jeep. I got rid of code 46 but I still have code 41, "Alternator field control circuit open or shorted".

Started on the wrong wheel. Should of started at right rear move on to left rear then move on to front Right, and end with front left

You are a hero to many of us for making these videos. Thanks again.

What tool do u use to take off the first layer?

How do you put ir back im 😂 having trouble with that top clip

Terrible video

Good video. Is there an AC adapter included? My box does not include any cables, and from what I can tell it should include an AC adapter. It also seems to want me to connect a USB C cable to the TV but that’s not in your video? Is that not needed?

What size is it ?