Video

Hello, you mean that if you remove the reverse, the logo don't back to the "normal" position ? it stay open ?

you've probably tied them to the cable that powers the hazard red light when door is open

Hello, if you don't have blue/gray, you will have anoter color who must be the only gray cable. you can contact me on discord discord.gg/XaNeV7pP

Hello, for handle because i already have door handles light, i just take off the plastic from the new ambient light for keep only the LED and put between plastic handle and door panel, just next to the OEM door handles light. i didn't want to do hole or cut someting. and for connect you just need to connect on ambient light controller.

Hello, with this retrofit, unfortunately we can't manage the color from the OEM multimedia. Only with a smartphone app or with the button from the ambient light controller.

Hello, for Arteon take gray wire. 👍

Hello, after the installation, unfortunately no place for the spare wheel.

Hello, you can contact me on discord. discord.gg/GaraPpWE

Hello, muffler is missing. And the exhaust pipe is riveted on diffuser who is on bumper nothing more.

Hello yes you can send me the file. put it on google drive or other cloud and send me the link.

@@nocturneindustrie i have Kess but its look dangerous with Kess, i will order Ktag. Do you think its ok if i drive it without soft till i have the tools to copy the software? :)

Did you delete the DPF but did do the software? You can drive but you will have DTC and powerless. You have edc17cp14 before 2009 ? If yes you can do with kessv2 by OBD, with ktag more safe yes because you can save full backup but you need to open the ECU.

@@nocturneindustrie im waiting for the Ktag to copy to software and sebd it to you x.

Good 👌👌

Hello, Tell me with engine check light, do you have power loss ? On some model (seldom) you can have dpf off but still have DTC problem, it depend about the tuner who did the job, car model and ECu software. You need to delete this DTC, (not erase).

Where will the CANBUS be Audi A5 8T facelift on right hand drive?

@nocturneindustrie

Hello, if i understand good, you want to install the original active sound system with kufatec sound booster from Audi A7 4G to A5 8T facelift ? And you want to get the setting on your Audi A5 MMI 3G+ ?

On A5 8T canbus is on right side behind the glove compartment, And yes you can install OEM active sound on Audi A5 but you need also Audi drive select on your Audi A5.

@@nocturneindustrie yes. Correct. I have got the original OEM Eberspacher (active silence) muffler with speaker, the audi Khunke black sound module (4G model not 8T) and Kufatec blue module with button. I want to connect this to my right hand drive car but I am missing wiring loom as it was hard to get it off OEM wiring from the A6. Shall I try to take it off A6 or buy new look from Kufatec? Can I have your email to ask for help?

ciao, grazie mille, non so dirti se è possibile installare solo il pulsante. Non ci ho mai provato. Se vuoi il pulsante di avvio, faresti meglio a installare un altro modulo. E pagare tutto il sistema e mantenere quel pulsante non è un buon affare. devono esserci altri modi per installare solo il pulsante.

Thank you for your comment ✌️✌️ I appreciate it

Hello, no you can't

Hello, Yes you can connect to window switch but you need to take light signal cable (12V) on switch connector. Yes you can don't use dashboard light, and connect only main controller, it will work.

Okay thanks! What do you mean with the light signal cable on switch connecter? I dont understand that. And where do you advise to Connect the main controller on?

on switch window connector, example there 6 pin connector, you need to find on this connector the cable who will turn on the door button light when it's darkness/night. it is a 12V signal, you can connect your sub module(red cable) to this cable and negative cable on the door, like that when your headlight will turn on, the ambient light also will turn on. And for main module you can connect to dashboard light switch on left side.

You mean by dashboard light switch the switch to turn on the parking light/head light and all the interior button lights like the a/c and radio lights?

Or can I Connect it to the radio or something like that?

Hello, yes you can plug the OBD VCI and scan the car, no problem with that.

Hello did you find a solution ? speakers and positive signal for LED is not linked, there is no link togeter, maybe you forget to connect back the speaker. please check the wire.

Hello, symphony too much tuning))

Hello, where are you from ? Because sometime the link don't work in some country. i can try to give you a working link on your country.

@@nocturneindustriegive pls for Estonia

Can I replace the fuse to a 14.4V one and camera would still work at that voltage?

Hello, no problem with 14.4V. All cars when engine is running have voltage between 13V and 14.8V. So did you try another fuse for check is the fuse will burn again ? did you had this problem when you connect it?

@@nocturneindustrie I fixed it! I connected to a 10A terminal.. So I just replaced the fuse. If I want to get rid of the line, do I cut the white wire?

Yes you cut white wire and you will not have the line.

Hello, sub controller is wireless, jus need to connecte power red + and black - only

Hello yes i'm based in France. I can advise you, if you delete EGR, your DPF will have more short life, and if you delete DPF, you will need to delete ADblue. You can only keep catalysor..The bad story of EGR is often because people delete DPF and let EGR on. ON your model if you delete DPF, you need also to delete EGR. I can be wrong only if your engine code is without low pressure EGR.

@@nocturneindustrie Mersi beaucoup🤗

i don't think because sub controller consumption is very low. you can try and check if your battery keep power. but what you mean cigarette lighter grey cable? main controller have only red and black

@@nocturneindustrie i use it now for couple of weeks and no problem with cars battery 🙂 , main module is power it from my cigarette lighter its controlled with cars light and there i use the grey cable and connected with red cable of the main module and no problems but on the doors the grey cable give voltage problems and the system shot off thank you for your great install video my friend

Hello, did you try to put ambient light to maximum power with the button on your car ?

@@nocturneindustrie i dont have a visual button on my car for ambient light i did try to look and find it wiht vcds but with out any luck

Hello, you are looking for CAN drive on which car ? Audi A5 ?

Hello, thank you. About legal side, it depend about your country, In France this car was on test and absolutly no problem. No smoke "no pollution". And with average speed 90/100kmh autonomy is 1400km.

Hello, chech this : s.click.aliexpress.com/e/_Dki0FgD

Hello, yes you can open the trunk. You push for flip the logo and the trunk will open. Exactly same as golf 6 golf 7 Passat 8 etc.

Hello, yes it must be same color, it is same plateform, but there is some people who had problem to install it with gray/blue cable on the door, because the BCM module cut off the power for light (detect a fault). it depend about the bcm model. it is possible to install on permanent 12V power for the subcontroller and try to find on dashboard gray/blue 12V signal for main controller, for reduce the consumption on the energy.

@@nocturneindustrie Ok, if i add with VCDS light door you think it can be worked ? And when you Connect + and - on cable, you just cut the cable or you Connect it directly on the pins ?

You mean if you install OEM LED ? Because even you use coding for activate the LED the wire is different, blue/gray is used as a signal for headlight and dimming light button. If you activate with vcds the LED it will be okay for OEM LED but for not OEM it will not work. BCM will cut off because the control module (from china) take more energy that OEM LED.

That’s a problem with my installation, on wich other wire can I install it on the door , passenger and driver doors???

hello, tell me on which car you want to install the ambient light ? and if you can tell me how many cable there is on the window button from front passenger side ? and also the cable color please. i will try to help you.

Hello, before installing the keyless, you had automatic mirror folding and windows auto close ? If yes you need to try other combination because the combination can be different with the car model and car option.

Hello, did you connect main module and sub module? and headlight is on ? On the door you took blue/gray cable ? or on the dashboard? if no OEM light that mean the BCM stop the power to light. you need to disconnect the LED and find why because it must work with blue/gray cable/. and not blue cable. with blue cable it doesn't work. check and let me know

@@nocturneindustrie yes, the main module I connected to the fuse box and it works, but the side modules on the doors are not working. Yes the blue/gray wire, that’s from the oem door lights, am I right? For some reason probably like you said the bcm stops it, but can’t figure out why..

Yes you are right, can you try to go to multimedia system (MIB) and go to "CAR" setting and put the dimming light to maximum. After that turn off the ignition and close the car. Open the car and turn on the ignition. let me know ))

@@nocturneindustrie eventually I connected it to the window motors on each door, but now the problem is I don’t know to which fuse (on the front trims I did not mount the leds) should I connect the main module to work with the oem lights (to turn on and off automatically). Do you have any idea? (I tried with the 10A fuse which is for the inside lights I think, but they don’t turn off, I don’t know why). Thank you very much for your time and help!!

Okay let's try to understand right. We will start with main controller, for dashboard light. Did you try to connect main controller to fuse N°36 or N°37 (5amp) it is fuse for headlight ?

Hello, only with phone application and you can also use little button gived inside the package. unfortunatly with OEM multimedia you can't.

Hello, i think it is possible with the software for updating the module, you can ask all the detail to the seller. He willl send you software for update the module and with this software you have a lot of setting for adapt to your car model. Be very careful, you need the software with file for your box controller model. On the box there is a sticker, it is your model. On the video you can see CRN-AD00 at 2:44. If i find where i put the link i will send you.

Hello, tell me what is your car brand and model ?

Hello, it is 1 cable who is blue and gray. This cable have 2 colors.

@@nocturneindustrie Okay. As I found out. It is a cabal that is gray and blue in color? Is that right ?

Yes right. And for be sure and do not do mistake. Always confirm with a multimeter. If have 12v when you turn on the light it's mean it is right cable.

@@nocturneindustrie Do you have a discord link? I have a few questions . Thank you

Hello, yes discord.gg/q3zeFQAG

Hello, maybe you turn on the ignition when the airbag passenger switch connector was removed?? You need diagnostic tool to reset it.

Ciao. Purtroppo al momento non ho una soluzione.

@@nocturneindustrie alcuni hanno trovato soluzione... sui pin dello spinotto dello switch.

Hello, you can take the power from dashboard (tachometer), but it is not the best idea, Better to find the power in another place (like button cable). And this place depend from which car you want to install the LED. Usually you need a tester or multimeter for check which cable is for 12v from light signal. On the video for VW Passat B8 it was a blue/gray cable. You take your tester/multimeter and you check each cable with light OFF and light ON, and when you have 12V when light is ON. It mean, you can use this cable for LED power.

Hello, with periodic control, no problem. But maybe it depend about the country.

Hello, I can do it for you

Hello, discord.gg/hmcMWacS

Hello, for find the 12V permanent and ignition, better to have a multimeter or tester which can give you the voltage. you can check on fuse box if you have free pin for fuse (from package). For connect the ground you can find it everywhere on véhicule, if you want to install as i did, just take off the screw and use ring terminal connector and put back the screw. For your model no need coding. Coding is only is you want to install on original VW radio.

@@nocturneindustrie Thank you! One more questioni: does the yellow power cable power both camera and the motor?

Hello, unfortunately no we can't change the color on MIB2. Only with the button from LED box controller. Or with smartphone application for LED box controller.

Hello, check this link s.click.aliexpress.com/e/_DBcogg9

@@nocturneindustrie i tryed but dosnt work :/

from which country you are ?

@@nocturneindustrie germany

ok good, on main page of Aliexpress on the top change setting, to "send to France", and after that you will have access to the page, you can contact the seller for shipping to you address. or you can write this 18 in 1 Ambient Light For Car Interior 64 Color Breathe Dashboard Door Decoration LED Strip Lights RGB Bluetooth App Control 12V

Hello, what do you mean ?

@@nocturneindustrie sunlight?

Yes it is working

Because he`s.... notcturneindustrie. 😛😛😛

Привіт, зазвичай із синім/сірим у вас не буде проблем із відключенням електроенергії 12 В. Якщо у вас є збої, ви можете спробувати підключитися до іншого джерела 12 В. але я не знаю, чи світлодіодні коробки споживають багато енергії. і тому ризикує розрядити автомобільний акумулятор. тримай мене в курсі

@@nocturneindustrie проблема в тому що коли підключаєшся так як на відео, і підсвітку ставиш на мінімум (це саме в дверях) то підсвітка взагалі не вмикається, до того ж і зникає підсвітка в дверцятах, перестають світитися кнопки. Я дверцята підключив до загального живлення яке в них заходить, так, там постійно напруга, вже пройшов тиждень, поки проблем нема. Що до акомулятора, сама ж підсвітка не працює, як вимкнений головний блок, а він підключений до підсвітки на торпеді. Поки знайшов тільки таке рішення ((

Дякую за вашу думку для спільноти, я перевірю, чи є у мене така ж проблема, як у вас. :)

Привіт, я поставив підсвічування на мінімум і світлодіоди тьмяні живлення, але все продовжує функціонувати нормально. Можливо, регулювання інтенсивності на BCM (наприклад, через VCDS) може вирішити проблему. У мене є висока версія BCM.

@@denys_konstantynov I have the same problem. May I know which cabal you connected to?