- 11
- 10 062
MiMShed
Registrace 24. 08. 2023
The intent for my channel is to bring handyman and DIY content that’s easy to follow and understand.
My passion is tinkering in my shed so you can expect to see anything from motorcycle and lawnmower repair, welding to carpentry and home maintenance.
My goal is to help people. If you can learn just one thing from my videos that will help you, then I have succeeded.
Disclaimer:
I am not an engineer, nor am I a welder or a carpenter. The skills you see me use here are self taught which I have learned from many years of making mistakes, lots of mistakes.
If you wish to copy what I’m doing, that’s great, I’m flattered. But do your own
research because my way is quite possibly not the correct way.
My passion is tinkering in my shed so you can expect to see anything from motorcycle and lawnmower repair, welding to carpentry and home maintenance.
My goal is to help people. If you can learn just one thing from my videos that will help you, then I have succeeded.
Disclaimer:
I am not an engineer, nor am I a welder or a carpenter. The skills you see me use here are self taught which I have learned from many years of making mistakes, lots of mistakes.
If you wish to copy what I’m doing, that’s great, I’m flattered. But do your own
research because my way is quite possibly not the correct way.
Yamaha TTr230 Starter Clutch Repair
This Yamaha TTr230 is hard to start.
Starter clutch was the issue. Let's replace it.
Starter clutch was the issue. Let's replace it.
zhlédnutí: 281
Video
Scott Bonnar 45, 17" Twin Rail Rebuild Pt 4
zhlédnutí 1,1KPřed 4 měsíci
The build has come to a very satisfying end with a successful restoration of an Aussie classic. Join me as I bring home the final part to this series and witness this classic lawn mower burst into life. A big thanks to Ash at Reel Mower Solutions for all his help with parts and service. reelmowersolutionswa@outlook.com
Scott Bonnar 45, 17 Twin Rail Rebuild Pt 3
zhlédnutí 473Před 5 měsíci
In part three of this video series, I set the drive roller height, fit a new engine and fit and set up the drive sprockets and chains. Parts: reelmowersolutionswa@outlook.com
Scott Bonnar 45, 17" Twin Rail Rebuild. Pt 2
zhlédnutí 576Před 5 měsíci
Follow me as I completely strip down this iconic lawn mower and rebuild it from the ground up. From removing the cracked frame rails and replacing them with heavier gauge metal, to a fresh Olive green paint job and renewing every worn part. realmowersolutionswa@outlook.com
CV Joint Boot Replacement. Mitsubishi Triton
zhlédnutí 5KPřed 8 měsíci
CV joint boots can become hard over time and crack exposing the CV joint to contaminants that can result in premature wear of the joint. In todays video we replace the CV joint boots on a 2009, Mitsubishi Triton.
Jeep Grand Cherokee. Front disk pad replacement and rotor machining.
zhlédnutí 118Před 9 měsíci
My Jeep's brakes were not performing well and it was time to investigate. Join me as I replace the front disk pads and have the disk rotors machined to improve my Jeep's braking performance.
Fitting a "United4x4" bull Bar to a Mitsubishi MN Triton.
zhlédnutí 1,6KPřed 10 měsíci
Fitting this bar presented us with some challenges. Join me and experience our frustration and elation as we fit up this bumper replacement, United4x4, bull bar to a 2009, Mitsubishi MN Triton. www.united4x4.com.au/
Motorcycle Lift Air/Hydraulic Ram Upgrade
zhlédnutí 73Před 10 měsíci
Fitting an air over hydraulic ram to my motorcycle lift. A quick and simple upgrade to make the bike lift more user friendly. www.ebay.com.au/itm/253161786595 Air/Hydraulic Motorcycle Lift Bench Pump Assembly suit Workbench (HPMAHS)
Scott Bonnar 45 Rail Replacement.
zhlédnutí 421Před 11 měsíci
In this video I will be replacing the cracked frame rails on a Scott Bonnar 45, 17 inch, reel mower. Cracked frame rails are a common fault on these popular 1950's mowers. Follow along as I use my home made jig to replace the cracked rails. autobarn.com.au/ab/Autobarn-Category/Shop-our-Full-Ranges-by-Brand-|-Autobarn/Motospray/Motospray-Etch-Primer-Black-400g MSSEPB400/p/DI08285
Making an ATV / Quad bike Lift. Raptor 700
zhlédnutí 47Před 11 měsíci
I was running out of room in my shed and I needed to regain some space. Going up was the only option. Using 38MM x 3MM box tube I have made a frame that enables me to raise my quad giving me back precious shed space. My passion is tinkering in my shed so you can expect to see anything from motorcycle and lawnmower repair and welding to carpentry and home maintenance. My goal is to help people l...
BMW Oil Cooler Hose Leak Repair | E90, E91, E92, E93 335i
zhlédnutí 295Před rokem
Today I attempt to repair an oil leak from the oil cooler supply pipe on a 2007, BMW E93 335i, N54. www.ecstuning.com/b-genuine-bmw-parts/oil-cooler-pipe-feed/17227567207/ Hi CZcamsrs. My name is Dave and welcome to my very first CZcams video. Please be kind if I mess up a little, I am not an expert in anything. My intent for this channel is to bring handyman and DIY content that’s easy to foll...
No mate you smash it with a mallet. 😮😂 Good to see someone doing a video on how to get the CV apart correctly Thank you very much😊
Gracias
Generic boots are pure shhiit. You'll be doing this all over again within 24 months. 😢
Just fitted mine but it only took me around 2 and a half hours
Hi mate nice job where did you get paint. from 👍
Hei! Cheers from argentina. I've got a l200 triton too, 3.2 glx (long bed) I want ask you where did you get the torq specifications of this truck, or if exist any manual with all the workshop information...because i have a torquemeter but i cannot use by the time and i would like to be more accurate Thank you for this video, im a suscriptor now!
Nice job mate! Love the shed set up too!
Thank you. Appreciate your comment.
Loving these videos mate. About to start a rebuild myself soon.
Thank you for your kind comments, Chris. Enjoy your rebuild. It's all about the journey.
Love the content , you have refurbished this Scott Bonnar in more depth than others do in a year. I’m watching all the videos as well .
Wow!! Thank you.
Can you post a parts and tool list please?
Hi, General hand tools. The only specialised tools would have been the torque wrench and impact gun. 32MM socket for the axle nut. I try to keep it simple so anyone can do it. I hope this helps?. Regards, MiMshed.
What part number?
17:39 (0 minutes ago) Hi Usman Maulana, In Australia, 2 x Repco P/N GSP, CVB.0084 Boot kit. I hope that helps. Regards, MiMshed.
Cool. My 2003 Montero Limiteds (3 of them) are exactly the same. I've replaced the driver/left side CV axle on one. Now my passenger side is bad on another. The boots seem to fail before the bearings go. Usually the contamination ruins the bearings unless caught quickly. GSP brand sells them for $61 to $76, depending on the side. Lifetime Warranty. Ama zon. Do not order them from Detroit Axle (Ama zon & eB ay), as they don't deliver them and it's a hassle to get a refund too!
Thank you for your comments. Its nice to know that my videos are appreciated.
Thanks, Great video. Will help me in the upcoming weeks when i install one from mcc to my triton, theyre solid utes and make a good 4x4 rig.
Thanks. It’s nice to know that my videos are helping people.
Thanks for your kind comment. It was a fun project on my son’s car
Not the best kit to buy but well done! Good to see father & son learning & working together for a good result.Your son will probably remember this for the rest of his life.
Thank you for your kind words. Yes it was a challenge but we are happy with the results.
What did you di with washer bottle ?
Hi, If you are referring to the OEM it has been disposed of.