How To Scan Free French Channels | Eutelsat 16A 16East On SuperBox Decoder
To scan French channels on the Eutelsat 16A satellite using a SuperBox decoder, you typically need to follow these steps:
1. **Connect your SuperBox decoder to your satellite dish**: Ensure that your SuperBox decoder is properly connected to your satellite dish. This involves connecting the coaxial cable from the dish to the input on the decoder.
2. **Access the setup menu**: Using your SuperBox remote control, navigate to the setup menu. This can usually be accessed by pressing the "Menu" button on your remote.
3. **Select satellite configuration**: Within the setup menu, look for an option related to satellite configuration or setup. This might be labeled differently depending on your decoder model.
4. **Choose satellite**: In the satellite configuration menu, select the option to add a new satellite. You may be prompted to enter the satellite's name or orbital position. For Eutelsat 16A, you'll enter "Eutelsat 16A" or "16° East".
5. **Enter satellite parameters**: After selecting the satellite, you'll need to enter the specific parameters for Eutelsat 16A. This includes the frequency, polarization, symbol rate, and FEC (Forward Error Correction) values. You can find this information online or in the satellite's documentation.
6. **Start scanning**: Once you've entered the parameters, initiate the scanning process. Your SuperBox decoder will now search for channels on the Eutelsat 16A satellite.
7. **Save channels**: After the scanning process is complete, your decoder should display a list of available channels. Browse through the list to find and select the French channels you want to watch. Make sure to save the channels to your decoder's memory.
8. **Exit setup menu**: Once you've saved the channels, exit the setup menu and return to the main interface of your SuperBox decoder.
9. **Enjoy watching**: You should now be able to access and watch the scanned French channels on your SuperBox decoder.
___________________________________
LINKS
Visit The WEBSITE for more Info:
www.pbteck.com
INSTAGRAM;
pbtecknology
FACEBOOK;
pbtecknology
TWITTER
Pbtecknology
TELEGRAM:
t.me/pbtecknology
PBTECKNOLOGY
czcams.com/users/Pbtecknology
#satellite #tv #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #fox
Installing the Eutelsat 16A satellite signal requires aligning your satellite dish properly to receive signals from that specific satellite. Here's a general guide on how to install the Eutelsat 16A satellite signal:
1. **Choose a location**: Select a suitable location for mounting your satellite dish. This should be a place with a clear line of sight to the southern sky, as the Eutelsat 16A satellite is positioned in the sky toward the south.
2. **Mount the satellite dish**: Install the satellite dish securely on a stable surface, such as a wall or a roof. Ensure that it is mounted at a suitable height and angle for optimal reception. Refer to the dish's installation manual for specific mounting instructions.
3. **Point the dish**: Use a compass to determine the general direction of the south. The Eutelsat 16A satellite is positioned at approximately 16 degrees east of the Greenwich Meridian. Adjust the azimuth angle of the dish accordingly. You can find the exact azimuth angle for your location using online satellite dish pointing calculators or smartphone apps.
4. **Set the elevation angle: Tilt the satellite dish upward or downward to adjust the elevation angle. The elevation angle varies depending on your location. You can calculate the elevation angle using online tools or consult satellite dish pointing charts specific to your area.
5. **Connect the satellite receiver**: Connect the coaxial cable from the LNB (Low Noise Block) on the satellite dish to the input port on your satellite receiver or decoder.
6. **Power on the receiver: Turn on your satellite receiver or decoder and access the setup menu using the remote control.
7. **Select satellite: Navigate to the satellite setup or installation menu in your receiver's settings. Choose Eutelsat 16A (16° East) as the satellite you want to install.
8. **Fine-tune the dish**: With the receiver's signal strength and quality indicators on-screen, slowly adjust the azimuth and elevation angles of the dish. You may need someone to assist you by providing feedback on the signal strength and quality as you make adjustments.
9. **Peak the signal: Continue fine-tuning the dish until you achieve the highest possible signal strength and quality on your receiver. This indicates that the dish is properly aligned with the Eutelsat 16A satellite.
10. **Secure the dish**: Once the signal is optimized, tighten the bolts and screws on the satellite dish mount to secure it in place.