Video

Whats your tip to tip distance with the right pitch setting on the S2?

I need to do mine too. A couple of things occurred to me looking at it. 1st you could probably take the broken bit of the boom out and just put the boom back in, OK it would be a few mm shorter, but still...Obviously I'm not being too serious here, as with the shorter boom it probably wouldn't fly right, and the tail rotor may end up hitting the main blades. Thew other thing that occurred to me, was whether it was necessary to unplug the tail motor from the flight computer, would it be possible to disconnect the tail motor at the tail end, like is it soldered?

Tyty

Is the 3 blade any different setup?

I writing this in 2024 and I appreciate this video tutorial .I've just bought a Blade 230 V2.

Thanks man. Made some triple X recordings from my wife that the guys at the field are going to absolutely lose it. 😆

I have an NX8 Tx and cannot get tx into servo setup mode. Servos don't respond. Can you please help me?

Still helping in 2024!

This is my first heli and this video helped. Starting to venture out or safe mode and boom right into a disk golf goal thing-ma-jig. Parts are in route, thanks for the help!

What tools do I need to repair this heli?

Very helpful tutorial thanks .

Very very helpful video, thanks

well done...great flying

thats such a cutie little thing.....i see you even put it out of track which is a brain tease for me as to why, except to force the front end to slide. I guess when u r a 3D expert in heli this baby is easy enough skill level to operate.

Now out of date, do one on the App.

I have been trying to find a lap time comparison between a traxxas tqi radio vs a higher quality radio. Both installed in the same car and I cant find this comparison anywhere on CZcams

Hello, and thanks for the video. I was wondering if my links are at the right length according to the manual should I have to turn them anyway to set zero pitch? Also I can use programming to set pitch on my M2. Would I be able to just use the transmitter or would I have to turn the links also? Also, I noticed I seem to have zero pitch at mid stick when I’m in idle up but not normal mode. Is this normal? Finally, my bird flies perfectly level even though I don’t have zero pitch at mid stick one in normal mode. I guess there is a difference between the swash being perfectly level and zero pitch. Am I mistaken to assume that zero pitch is most important for inverted flying and the like, hence, is that why I have close to zero pitch in idle up and what are the ramifications for not having zero pitch since the hell he seems to fly perfect. I realize I’m asking a lot of questions, but any help would be appreciated.

Outstanding step by step feathering shaft replacement! Thank you, sir!

Thank you for this video. Greatly appreciated.

What size wooden blocks did you use for your helicopter look like a 1 inch block of wood rot and back turned out nice I’m gonna build one

Just a side note if your going to do this mod, you dont have to remove anything from the fbl, just loosen the boom off, and snip the wires. Then solder on your servo connectors.

This hobby is exciting. I had a rotor blade strike the tail boom after the linkage broke , flew it again and it snapped. 😅 Thank you for the video Sir.

I have a "pre smart" 230s v2..it needs a reciever..can i update to a smart reciever and esc and retain original motors and servos??? Im using an nx8 radio

If you don't have a new boom you can pull out the broken piece put a small hole in the leftover boom in the right place and just push it back in and put screw in. Have new booms coming but even with slightly shorter boom still flies just the same.

just bought a used 1 with some replacement parts, specifically i need to replace the tail motor. what size is that fitting for those screws?

Thanks for the video. Man those are really small screws.

I now own this lottle heli and my daughter has a blast with it learnig....Thanks Again JJ

Be nice to have a MANUAL for that Goosky S2 flight controller. How did you find out the setting was 11.5? And what's the brand of your pitch gauge please? And thanks.

Do you think it's worth the $100 extra for the brighter screen and usb c?

Where did you buy this? I’d like to get one

Thank you

Добро пожаловать в мини дрифт 🎉🎉🎉

Having a good time

hey all maybe you can help me. i repaired my 230s and he bacame a new body frame but now i have an issue that he vibrates very strong if i start the main rotor. can maybe somebody explain me how to calibrate this one? thank you so much

Good vid ;) When u are adjusting full positive or negative is the heli in normal mode, stunt 1 or 2?

I just bought this helicopter I'm shocked it is so tail heavy with an 850 mA battery…This video is all you probably don't even have this helicopter but I just bought one brand-new for 100 bucks. It's just his tail heavy is yours is and it's sickening I hate horizon products only got mine because it was cheap. And don't compromise if you're still flying it should be dead flat and when you said it's better it's actually really bad it has to be dead flat. Well if you're still out there your video is important but you didn't stress hard enough it should be dead flat… And I know it may suck but the lead should either be in the canopy in the very tip of the nose… It should still stay on. If you don't want it on the canopy then get a popsicle stick I don't care get it is far forward as possible.Yeah been around for a while been doing helicopters for many years. But I'm getting old haven't done it for a while and like I said I bought this helicopter cheap

Can you show us your settings in your transmitter?

Looking forward to an update to your update and a more detailed review later?

Thank you this was super helpful as I fly indoors a lot but also wanted something suitable for outdoors. Seeing it compared to other models I'm familiar with was really useful!

Do you have any battery telemetry? I saw in another video that no telemetry was available with the included Transmitter when used with a Futaba protocol but now I am curious since you have dx9. Thanks

RC drifting is a blast I haven't done it with a 2wd though

sorry buddy but this is piss poor narrating not specific enough.

Hi, is anyway to deactivate the self leveling in normal mode. My S1 in normal mode act very erratically and when it doesn’t it drift away.

Hi see you have vids on the 230s .very helpful vids I’ve acquired a2nd hand v2 but wen I spool up on kitchen floor rudder only works one way think it’s left dosent turn the other direction don’t know weather you could help thanks

I’m looking at DriftArt

You may wanna check out LDRC 1802 or 1802, the RWD gyro-enabled RC drift cars. I haven't got mine but so far, they look like a great choice for drift beginners.

Surprisingly, here it is 11 years later and I'm finding this video is helpful.

Hey jack can you make a video for the t8 transmitter from rtf version to bind to different goosky models? For example...buying the s1 legend rtf and then the bnf version of the s2 legend and bind it to the s1 t8 Transmitter

Thank you for showing a tear down. You saved me loads of time.