Video

Wow, who the hell taught you how to cut down a tree? You don't have any idea what you are doing.

Way too much talk.

Sounds really rich… can you lean it out any and pick up some speed?

Hey Kenny, great video Do you have any pictures of when you used jbweld in case to raise the compression?

You're right. Jesus saves.

It will run again and last a long time New piston and rod 😊rings valve job 😊😊😊

Sepertina 372 sama dengan 365 ya bos. Yang beda cuma cylinder nya

So, did you get the compression you were looking for? Still recommend? Thanks

Definitely getting of these. It beats putting stihl motormix in 8 different machines lol that stuff is $41 a gallon here

I have a KM130R. Not sure what the major differences are besides a bigger fuel tank, but it’s a monster. For the string trimmer, mine came with the 25-2 autocut head. You can run up to .105 trimmer line in it. It came with smaller line and the upgrade to .105 line made a huge difference in what it can cut. I haven’t found any grass or weeds big enough to cause any issues.

Camera man shakes like a beaver shitting razor blades

Now see other people didn't mention about any worn lobes on the camshaft you did and i have because on my 18hp intek engine its lobes on the camshaft were worn down enough while the compression release was still good wasn't broken it all just worn lobes was my problem Now if the lobes were replaceable I'd do that and still use my old camshaft with its good compression release so after taking my camshaft out i compared the two together to see what the difference was and seen it But the videos on those focus on the compression release on the camshaft instead of pointing out it could be worn lobes as mine were worn. I dont think a valve adjustment on one with worn lobes would do much good anyways then the only way i figure the top lobe which actually was the bottom lobe was worn more than the top is because someone had already done a bad valve adjustment job on the engine

Would that piece fit the i/c briggs model of that same engine

👍👍👍 we've all been there

Sounds really rich

Can you do a quick video on how to remove the gas tank for replacement? I have a saw with a broken handle and need to replace the whole assembly.

Good video! I will be epoxying my cases.

As soon as you took off the flywheel you should have took the alternator off or the windings. The way he's throwing that motor around he'll wreck the windings on the alternator that which is underneath the flywheel

Really informative video thank you very much thank you for being the believer in Christ Jesus he is the only Truly Way for salvation I'll use the word for you that you may be aware of Maranatha even so come quickly Lord Jesus😊😊😊😊

Thanks explains allot

USE CLEAR BOTTLES NEXT TIME

Ok. Ash. I love Ash. Beautiful grain.

What kind of tree you cutting?

I have a 2010 and a 2012 and really have had no problems with either. Never had a problem with leaning out. Not sure if the early and later ones are different but i know the cylinders are different. One is 4 bolt and i think the later have 3. Different air intake and air cleaner too. Opened up the muffler with a vertical slot like my 461 and opened up the baffle under the air cleaner and she runs like hell now

Nice will have plenty of firewood for memorial day weekend

I love the mini lathe stuff.I too use a 7x14 lathe for all my chainsaw builds. I’ve learned how to over come many things like setups for larger items. I just upgraded to a 5” independent 4 jaw. I got the adapter plate for like 50$ from little machine shop and the actual Chuck I found on Amazon for 80$. Pretty cheap for such a nice upgrade. Sometimes it’s nice to have the larger jaws to hold items you don’t want to move on ya. Anyways cool vid thanks for sharing

When you said you don’t touch the parts I’m guessing because of the oils in your skin cause rust. Reminds me of my dad when we had to weld near an engine like on the tractor or truck he’d never ground the welder on the engine because he said a tiny arc happens between the bearing of the crank and cam when you strike an arc. Causing micro weak spots and can eventually lead to a failure. Cool vid

Always feels good getting out and playing with some saws

Nice job on the camshaft repair. I love the Briggs 11HP vertical shaft engines. The parts for these are not as easy to come by as they used to be.

"said nah I'll fix it." this is the level of confidence I aspire to achieve

👍

Thank you for the video... From, "England'istan".

Left hand thread

Why do some k301 engines have balance gears and some don't?

Most of the action isn't even on the camera!

Super helpful

Brand new Ms311 4 tanks of fuel no spark. Not happy.

I'm considering converting my 1/4" HT131 to a 3/8" , can you telle how many teeth the sprocket on yours has? Is it a 6 or 7 tooth 3/8" sprocket? Thanks.

Is the bearing snapping a common problem with these

The pre mix gas sucks because of ethanol stay away from that

The other thang that helps and works is good gas . I cut would 8000-10000 feet so run 92 octane because of less oxygen at higher elevation good gas and good oil is the key

just what I was looking for!

Helpful video? WOW! Awesome, helpful to the core. This was precisely what I was looking for. Thank you so much, now, I do not need to get rid of my Stihl FS111 R for the Kombi version.

Thanks for the video, im playing around with my top handle 194 now. this helped me unpack this strato concept.

Thanks for telling us that! If you want to know about a job, ask the person who does it.

What is engine code for this motor? I can't find number anywhere,but my engine looks the same. I need to order piston rings

Just curious: Why not buy 10 thou oversize rings & file fit them. That's what I've done. It's a Lawnmower engine not the Space shuttle engine. ONE MORE THING: I don't hone or glaze bust, I just file fit .003"/ inch of bore and put it all back together. Then light loads for a while. It will be down on pwr slightly for a few hrs and maybe use a little oil but it will work for long time & save boring for another time.

i missed where he said .. messure the piston. then hone the hole. not blind hone. o will ..

That's not boring that's honing

Very good..