Video

Hello! Thank you for your interest in the project. However, please note that the program is functional and has been tested with success. However, the graphical library is no longer distributed since several years ago as the previous graphical library used has lost its maintenance. To make the program work, it is necessary to complete the command lines in the tinydriver.h file to control the SSD1306 I2C. Unfortunately, this part of the code is not available as I was unable to contact the original person who wrote it and held the copyright. As a result, the project is now archived. I hope this clarifies the situation. If you have any questions or concerns, please do not hesitate to contact me.

@@ElectroLIB thanks

😄👍

You have already created numerous prototypes similar to this one.😅 I genuinely believe that investing in the Arduboy FX is essential. Its sleek and ergonomic design, along with a 128mb flash memory, allows for all games to be stored on a single chip. I highly recommend it. A beautifully designed and well-considered platform!

The source code has already been available for some time now! ;)

all you need: www.tinyjoypad.com/esp82xx_info ;)

@@ElectroLIB when I plug the board into my computer, it doesn't show up in file explorer but the Arduino IDE recognises it, I'm not sure how I get the files onto the board.

@@Dashbr0 If you speak well of the firmware for megatinyjoypad, you simply need to open the main MEGAcompilation160mhz.ino file with ArduinoIDE and make sure you have selected the correct port (/ttyUSB0), click on (Verify/Compile), and if everything is okay, click on (Upload). Of course, make sure to install the necessary libraries beforehand.

@@ElectroLIB thanks, I will try that

@Abhiaudios The source code for the Vu meter is still available on the website but it has been moved to the Archive section of the main page. Please note that the code will need additional commands for controlling the screen in the tinydriver.h file.

Merci! ;)

SSH1106 i2c 128x64 1.3"

At the moment, I am at about 50% of the software and memory space! So yes, there will likely be enough space to add some animations.

Thank you so much! There is still a lot of work to be done before the final result, but I believe the essentials are already in place and functioning. So theoretically, I shouldn't encounter any major problems by the end. 😉

The truth is that I have been thinking about doing it for Attiny85 tinyjoypad for a very long time, but given the complexity of this game for me, I preferred to do it without constraints on arduboy first. I actually intended to adapt it to Attiny85 later on. When exactly, I don't know, but I will do it! ;)

@dsi7782 J'avais fait un schéma brouillon à l'époque, mais je crois qu'il contenait des erreurs. De plus, une fois le projet terminé, je n'ai pas réalisé le plan du résultat final. Voici le schéma que j'avais réalisé : drive.google.com/drive/folders/1f-K_QaYxzBLqYN5DV6BWkQvES1QDzQRh?usp=drive_link ;)

@@ElectroLIB bonsoir et m et ci beaucoup par contre je ne vois pas les valeurs des composants ni le type des tubes utilisés. Auriez-vous d autres documents? Merci.

@@dsi7782 Malheureusement c'est tout ce que j'avais en note pour l'amplificateur, le reste j'ai ajusté à l'intuition. Les tubes utilisés sont un VR150 comme régulateur de tension pour les préamplificateurs, des 832A en sortie configurés en push-pull classe "A", et des 6n16b pour le préamplificateur. Le plan était pour un canal.

@@ElectroLIB merci pour vos infos 👍

@@dsi7782 Si vous envisagez de construire un amplificateur similaire, optez plutôt pour des 12AX7 car les 6N16B fonctionnent très bien mais ont une durée de vie significativement plus courte !

Thank! Still a lot of work to be done before it is finished but it is progressing well and I believe it will be an excellent game!

yes

@@ElectroLIB Thanks, I tried and it works perfectly just when I connect to the cr2016 3v battery the attiny85 goes crazy and skips parts of the code. If you can help me to solve this problem I would appreciate it.

@@faristabakovic147 I would need more details to fully understand the problem. Please send me a short video of your issue! electro_l.i.b__fw@tinyjoypad.com

𝙏𝙝𝙖𝙣𝙠 𝙮𝙤𝙪 𝙫𝙚𝙧𝙮 𝙢𝙪𝙘𝙝, 𝙗𝙪𝙩 𝙄 𝙢𝙪𝙨𝙩 𝙖𝙙𝙢𝙞𝙩 𝙩𝙝𝙖𝙩, 𝙞𝙣 𝙧𝙚𝙖𝙡𝙞𝙩𝙮, 𝙞𝙩 𝙞𝙨 𝙮𝙤𝙪 𝙬𝙝𝙤 𝙝𝙖𝙨 𝙙𝙤𝙣𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙚𝙭𝙩𝙧𝙖𝙤𝙧𝙙𝙞𝙣𝙖𝙧𝙮 𝙬𝙤𝙧𝙠 𝙗𝙮 𝙘𝙧𝙚𝙖𝙩𝙞𝙣𝙜 𝙩𝙝𝙞𝙨 𝙞𝙣𝙘𝙧𝙚𝙙𝙞𝙗𝙡𝙚 𝙖𝙥𝙥𝙡𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙩𝙝𝙖𝙩 𝙖𝙡𝙡𝙤𝙬𝙨 𝙪𝙨 𝙩𝙤 𝙝𝙖𝙫𝙚 𝙛𝙪𝙣 𝙘𝙤𝙙𝙞𝙣𝙜 𝙖𝙣𝙮𝙬𝙝𝙚𝙧𝙚 𝙬𝙞𝙩𝙝 𝙩𝙝𝙞𝙨 𝙢𝙖𝙧𝙫𝙚𝙡𝙤𝙪𝙨 𝙡𝙞𝙩𝙩𝙡𝙚 𝙢𝙖𝙘𝙝𝙞𝙣𝙚 𝙘𝙖𝙡𝙡𝙚𝙙 𝙩𝙝𝙚 𝘼𝙧𝙙𝙪𝙗𝙤𝙮! 𝙔𝙤𝙪𝙧 𝙖𝙥𝙥𝙡𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙨𝙚𝙚𝙢𝙨 𝙩𝙧𝙪𝙡𝙮 𝙪𝙣𝙙𝙚𝙧𝙧𝙖𝙩𝙚𝙙 𝙩𝙤 𝙢𝙚, 𝙖𝙣𝙙 𝙄 𝙛𝙞𝙣𝙙 𝙞𝙩 𝙪𝙣𝙛𝙤𝙧𝙩𝙪𝙣𝙖𝙩𝙚 𝙗𝙚𝙘𝙖𝙪𝙨𝙚 𝙞𝙩 𝙝𝙖𝙨 𝙚𝙫𝙚𝙧𝙮𝙩𝙝𝙞𝙣𝙜 𝙩𝙤 𝙚𝙣𝙩𝙞𝙘𝙚 𝙥𝙖𝙨𝙨𝙞𝙤𝙣𝙖𝙩𝙚 𝙘𝙤𝙙𝙚𝙧𝙨. 𝘾𝙤𝙣𝙜𝙧𝙖𝙩𝙪𝙡𝙖𝙩𝙞𝙤𝙣𝙨 𝙩𝙤 𝙮𝙤𝙪 𝙛𝙤𝙧 𝙩𝙝𝙞𝙨 𝙚𝙭𝙩𝙧𝙖𝙤𝙧𝙙𝙞𝙣𝙖𝙧𝙮 𝙘𝙧𝙚𝙖𝙩𝙞𝙤𝙣!😉👍

it is entirely possible to use an external RAM but I believe that the pleasure of the attiny85 is to use it in standalone mode! ;)

@@ElectroLIB Thanks

Thank you very much! I was really eager to finish this project that I started in 2021. I had a lot of difficulty immersing myself fully in this project. It seems like the past three years have taken away all my inspiration! Finally finished. Nevertheless, I am happy with the result.

unfortunately the source code is no longer available because a report has been issued for this project! Sorry about that!

Hello @itsray5257 , thank you for your interest in the tinyjoypad project. Unfortunately since a complaint from a user, the games are no longer directly functional for common users. The games are still available but dedicated to experienced people! All games for tinyjoypad attiny85 are delivered without belonging to a specific library (therefore, the code must be adapted for it to work). Let me offer you a simple alternative to play my games. They are easily available on ARDUBOY and also on megatinyjoypad in the ESP8266 section of the site www.tinyjoypad.com/esp8285

All resistors are standard resistors but it is possible to use values a little below or above! Don't waste time creating the tinyjoypad mini console for attiny85, because the project hasn't been functional for a while! Opted earlier for the Mega tinyjoypad with the ESP8285 or ESP8266! ;)

@@ElectroLIB Thanks for reply. I released, buying new resistors is more effective for time. I have last question, do you have any github profile or etc.? Sorry for wasting your time.

@@elektronik_Ile-Vals I have a github profile but I don't use it anymore.

Simple method to download from any country! archive org : archive.org/details/tiny-tris-pc-v-2.3

@@ElectroLIB Thanks, i forgot look to Archive lol

@sergeykozinets9979 Just DOWNLOAD Firmware and all you need is in this zip file! www.tinyjoypad.com/esp8285 ;)

@@ElectroLIB Thank you very much for the answer, I did not think that the circuit was inside the firmware archive. Should it be powered from 5 volts or like the Attinny85 from 3.3 volts?

@@sergeykozinets9979 3.3 volts or one lipo cell!