Video

It is HPA high pressure air. A paintball bottle with a regulator at a maximum of 200PSI. Set to 160PSI. A 6mm hose with a quick release coupling goes to the magazine.

Thx

I had something like that once when I was loading my magazines. I let the charging lever click into place and had no more problems.

@@BSKorn1Thanks for the reply! Could you clarify what you mean by charging handle clicking into place? The magazine release paddle still hits the valve on the back of the magazine regardless of if my charging handle is back or not.

Works great but should only be used with hearing protection and of course with an ALU backplate.

@@BSKorn1 what about the nozzle ? What energy do you get ? I guess the recoil must be insane :)

@@CMBelite-FR I installed an NPAS and yes the recoil is brutal. Even at 160 PSI the kick is already great. But you have to be careful, the loading lever comes towards you every now and then.

@@BSKorn1 I wonder how the internal can bear the strain at 250psi

No, they are gas magazines. AEG magazines don't fit. The BB hole is in the wrong place.

I don't like these weird HPA adapters, you can just use the HPA rifle. The adapters look strange.

@@BSKorn1 better than shit ass tapped mags

@@TheWeekendShooter308 well, if you like that... no bolt catch, light magazines, short magazines, no real cap, different muscle memory, less PSI, too many bullets for an opponent, you need more than 120 shots per round, then an adapter is just right for you or go for something other than a GBBR.

@@BSKorn1 No I don't like them but it's not 2008 anymore. You can also just buy hpa gbb kits these days too. "Hold on I gotta reload and replug my line to shoot 35 rounds"

@@TheWeekendShooter308 I only find HPA kits with the disadvantages that I have pointed out. If you have something else up your sleeve, please write about it.

Both are great weapons but in the end the Spear is noticeably lighter and better. Nevertheless, the length of the Rattler is nice in the CQB. I will continue to use both.

Crusader Stahl Competition Straight Trigger. Ich mag den Trigger lieber, als den normalen AR Trigger von VFC.

Das Hopup muss sich erst noch einspielen. An dem Tag habe ich etwa 400 Schuss durch die jeweilige MCX gejagt. Einen Unterschied zu Stock und Tuninglauf + Hopup habe ich nicht bemerkt. 65 Meter Treffer waren keine Probleme. Das Hopup war aber etwas zu hoch gedreht. Gespielt mit 0,45g BB´s und zwischen 1.1 und 1,3 J.

Thanks for the information, I'll test it out.

What you definitely have to do is use loctide. During the last game, one screw from the anti rotation pin was shaken loose. PS Please and thank you.

Super Feedback, schöner Rückstoß und kein Bolt bounce mehr.

@@BSKorn1 Was ist Bolt Bounce noch mal schnell?

Der Verschluss schlägt im Hopup ein und prallt ab. Im schlimmsten Fall hat man ein Double Feed.

@@BSKorn1 Danke 🙏🏻!

Das kann ich alles am Sonntag testen mit der Rattler zusammen. Werde von dem Tag auch Spielvideos hochladen

Not everyone will do 200psi in the long run, with 160 being a good compromise. my backups use the same pressure. Since I use HPA I have the same pressure in summer and winter.

No, it wasn't that expensive, but it still wasn't cheap. nice for your purchase. Unfortunately for us it takes a lot of time and money to make a pass to buy one. You can't have much fun either, because everything is regulated to death.

Preorder is $1450 CAD before taxes. This is more expensive than the TM URGI… also is this based on the ar15 platform? Im wondering if we Canadian can buy the rs version since there is a ar15 ban rn.

@@iTziLLUMY It is based on the AR18 and has no buffer tube or spring in the stock. The RS Spear costs €4500 for us and the APFG cost €749.

it's around 550 dollars

Das ist die: Mk.II Predator Combat Pant Woodland von Invader Gear

@@BSKorn1 achso ok danke

Danke. Spiele eigentlich nur mit den Jungs, wenn ich mal Zeit habe. Habe auch den Namen nicht angepasst glaube ich.

We all hope for the variant

What are the features of the XM7? Longer barrel?

@@JC-XL larger, heavier, 6.8mm ammunition, side loading lever next to the normal one. It goes towards SCARH.

It's cheaper and that's very clear but I prefer the EOS

As far as I know there is only one batch this year. In Germany a few ended up at a dealer.

@@BSKorn1 Can you send me link please

It just got released.

Grüß dich! Also passen die HK416 Magazine von Vfc nur halt schwergängig? Bin am überlegen mir solch ein schönes Stück zu holen, bin leider noch zu unentschlossen… konntest du sie schon ausführen ? Wie lief sie ? Ansonsten wünsch noch noch schöne restliche Feiertage 🎉

@@DallasDeagleja die Magazine passen und werden mit der Zeit besser laufen. Leider noch nicht dauert noch bestimmt 2 Wochen. Es sind nur noch 2 verfügbar.

Compared to the 416 it is darker and more towards brown

it is a GBB with hpa tapped magazines

@@BSKorn1 Oh yeah now I see! Did you tap the magazines yourself? Nice setup btw

@@bramvdl27 yes, I did that myself. Simply drill a hole and cut an M5 thread into it. This means you can use common valves. Thanks.

It's not that easy to get real weapons here. especially the good, interesting weapons that you are not allowed to own.

An interesting solution.

Recoil from the M733 definitely occurs, especially if a steel bolt is installed. The GHM9 is much weaker but also fun. I can't say much about its efficiency since I use HPA, but some people report poor efficiency of the GHM9.

@@BSKorn1 ty for your experience

What do you mean by that

@@BSKorn1 NPAS setting sorry

@@CMBelite-FR I can't say how much it turned up in the end. In the video I had 1.4J. In the meantime the bolt was installed in the M733 with over 1.6J.

VFC RIS Rail For Umarex MP5 GBB Series (VF9-RIS-MP5-BK01)

thanks!@@BSKorn1

Actually quite simple. Remove the magazine base. Put a tissue in there because of the metal shavings. Drill a hole with size 4.2 and cut an M5 thread into it. All standard valves in the airsoft sector have M5 threads. Depending on what type of valve you want to use, cut a larger hole.

@@BSKorn1 thank you from wich country you come?

@@DJayEvo Germany

@@BSKorn1 aj Prima. Ich danke dir. Bist du noch aktiv im Softair Bereich?

@@DJayEvoIch bleibe aktiv, bis ich im hohen Alter nur noch Sammler werde und das dauert noch eine ganze Weile.

VFC M4 GBB Magazin VMAG

@@BSKorn1 Thank you for your answer.The gas inlet is characteristic, but did you process it by yourself?

I drilled a hole where the valve should sit and then cut an M5 thread into it.

I change the magazine when I'm empty. yes you have to change the hose too but that's okay. You can also build a double magazine with a hose.

@@BSKorn1 cool thanks, asking because I’m building my hpa rn. So this helps a lot

This improves performance, but you have to get used to the hose first. This is how I play backup and main weapon.

I packed smaller springs behind the stock spring to increase the pressure.

@@BSKorn1 ahhh gotcha, what kind of springs did you use?

@BSKorn1 I’d be interested to know if you have tested effects on gas efficiency with the additional springs buddy?

@@fumes1955 I use: www.sodemann-federn.de/21670 but you can also take twice as long

@@enidpuceflange I don't do an efficiency test because I use an HPA bottle. However, I can say the system runs much more smoothly and doesn't get stuck.

VFC G17 50er Magazine

Der Indikator für eine Patrone im Lauf hatte gegen die Hopup Unit gedrückt. Wenn der sich nicht leicht bewegen lässt, hat man das Problem.

I got a folding charging lever from the dealer

Thanks

I find it quite quick to swap. yes, you have to change the hose too. with other models it takes a little longer. You can also build a double magazine, like my Glock or MP5 magazine. With an adapter such as Area it no longer looks so nice and reloading works differently. Despite the hose, the pure gbb feeling remains

@@BSKorn1 Thanks for your answer. How much pressure are you putting on it?

@@markushunger2384160PSI around 11Bar

@@markushunger2384 160PSI around 11Bar

@@BSKorn1what énergie does it give you ?

I also installed the SEF handle and love it. Doesn't the A5 also have the burst function? would then no longer work.

@@BSKorn1 I am planning to purchase and install a SEF lower trigger set, but there will be no problem in operation if I replace it directly with the upper part of the MP5A5, right?

@@shotdog9908 No, if the complete lower set is installed there are no problems. As far as I know, nothing has changed in this regard and you can happily swap. I have an A3 from 2013 myself and so far I've been able to swap parts without any problems.

@@BSKorn1 thank you! It was very helpful

Unfortunately it was the only one I could get at the time but yes there is one for the 416

The performance has become much more consistent and the higher recoil due to the pressure is also better. an HPA kit is for saegs. With GBBRs you just have to put a new valve in the magazine.

​@@BSKorn1psi output?

@@bvphil982 160PSI

Hello, try this Video: czcams.com/video/vhmmz8rklEM/video.htmlsi=fGm8RninvZTq2Dob

Du musst du ein MOS Slide aus Asien bestellen. Der Original ist dafür nicht ausgelegt und die bastel Lösung über die Kimme finde ich nicht ansprechend. Kann höchstens ein kleines Video über die G17 machen.

ah danke für den tipp@@BSKorn1

Einfach ausprobieren. Mit dem Stahlverschluss hatte sie bei mir 0,9J gemacht.

Hello Sr were i can buy your product.? Im interested

@@Chicalichanate You can't buy it, you have to build it yourself.

Nützlicher ist es mit einem Adapter aber dann ist die esthetic noch viel mehr im Argen, als ein Schlauch dran zu haben. Unschöner wird es wenn ein MP5 oder M4 magazine an einer Waffe hängt die dafür nicht gemacht ist. Dazu wird es noch abartig lang mit so einer Konstellation. Nicht mein Fall 😅

I drilled a hole and cut an M5 thread into it.