![hans peder sahl](/img/default-banner.jpg)
- 27
- 4 922 604
hans peder sahl
Registrace 22. 07. 2009
This channel is about various projects I make.
My hobby´s variate from everything from diving, driving BMX, photography, casemodding, remote controlled vehicles such as quadcopters and racecars, and much other.
Enjoy!
My hobby´s variate from everything from diving, driving BMX, photography, casemodding, remote controlled vehicles such as quadcopters and racecars, and much other.
Enjoy!
Black & white gaming/office builds - fully water cooled with custom distribution plates
These two builds was created to function both as gaming monsters, but also silent office machines. Each build has two loops, one for the CPU and one for the GPU with a 360mm radiator for each. Everything is connected with a custom made distribution plate that I designed to fit into the bottom of the 5000D case, taking up the entire length of the case.
Specs for both machines:
Case: CORSAIR 5000D Air Flow
Motherboard: Gigabyte X570 AORUS Master
CPU: AMD Ryzen 9 5950X
RAM: CORSAIR Dominator Platinum 32 gb 3600mhz
SSD: CORSAIR MP600 2tb
GPU: Nvidia RTX 2080 Ti
PSU: CORSAIR AX1000
Fans: CORSAIR QL120MM
Cooling: Hydro X Series custom loops
Want to see more stuff? Check out my portfolio: hps.dk/
Music by soundcloud.com/chromabox/
Specs for both machines:
Case: CORSAIR 5000D Air Flow
Motherboard: Gigabyte X570 AORUS Master
CPU: AMD Ryzen 9 5950X
RAM: CORSAIR Dominator Platinum 32 gb 3600mhz
SSD: CORSAIR MP600 2tb
GPU: Nvidia RTX 2080 Ti
PSU: CORSAIR AX1000
Fans: CORSAIR QL120MM
Cooling: Hydro X Series custom loops
Want to see more stuff? Check out my portfolio: hps.dk/
Music by soundcloud.com/chromabox/
zhlédnutí: 20 514
Video
White Walker - My new ultra silent main PC
zhlédnutí 11KPřed 3 lety
I needed a new PC with a full ATX board for my current work and editing needs, so I decided to go all in and do a dual 360mm radiator system in the new 5000D case. 4 intake fans makes sure that the internals gets plenty of airflow, while both radiators have 3 fans in exhaust mode, so all hot air from the custom cooling system gets pushed out of the case. Specs: Case: CORSAIR 5000D CPU: AMD 5950...
Wifey's new gaming PC - Will 18 cores be enough for The Sims?
zhlédnutí 10KPřed 3 lety
Do or do not, there is no trying - Also, subscribe! This machine was put together with spare hardware from various other older projects and is majorly overkill for her needs, but hey, at least I have a machine that I can use for background video rendering (if she lets me). Specs: Motherboard: GIGABYTE X299 AORUS MASTER CPU: Intel Core i9 Extreme 7980XE GPU: GIGABYTE RTX 2080 SUPER GAMING OC 8G ...
60 second guide for cutting and bending acrylic hardline tubing
zhlédnutí 78KPřed 4 lety
Since I firmly believe acrylic to be the superior material over PETG, I wanted to make a short tutorial on how to cut and bend PMMA ( acrylic ) tubing / hard tubing perfectly every time. My preferred tubing size is by far 10/14mm acrylic tubing. It is easy to bend, and looks fantastic in all builds. I normally don't use a bending guide, and instead do the bends free hand. When you heat up the t...
RGB Boi - The 10,000$ triple loop, dual system gaming/streaming PC
zhlédnutí 10KPřed 5 lety
I was asked to build a dual system PC for this years computex to show off some of the new Hydro X Series products in the CORSAIR suite. So brace yourself for plenty of RGB, even though I had it set to a clean white most of the time! The system took 3 days to build, and I could only use stock parts, so sorry guys, no extreme custom water cooling plates, or cables in this build! I am however pret...
Tanky McTankface - The 3D printed tank
zhlédnutí 81KPřed 5 lety
Ever since getting my 3D printer almost a year ago I wanted to make a tank. Not just a small one that could drive around indoor, but a proper RC vehicle with a functional suspension system, and a sturdy design. After loads of prototyping, this was what I came up with. Everything is printed in PETG, and it has taken around 250 hours to print all of the parts. As the video shows it drives quite w...
Benchy McBenchface - The extreme benchtable gaming PC / workstation
zhlédnutí 20KPřed 5 lety
This build was done to try something new. A build without a case, where everything would be visible. So much work has went into this. The distro plate alone has taken an absurd amount of time to plan, machine & polish. The build was completed quite a while ago, but I have never gotten around to actually editing a video until now. Specs: Mobo: ASUS ZENITH EXTREME X399 GPU: 2 x ASUS ROG POSEIDON ...
Making a acrylic watercooling distribution plate / Manifold
zhlédnutí 95KPřed 6 lety
WARNING! Long video. The last 20 min is a long stretch of me drawing up the entire part. The first 7 min is the actual "guide" FAQ: Q: What program should I use? A: Solidworks (expensive), Autodesk fusion 360 (free for most people), Autodesk Inventor (expensive), Google Sketchup (free) Q: What o-ring should I use A: Ø2 mm is a good overall size for these type of parts Q: Where can I get o-rings...
The 9 step guide to perfectly sleeved custom length cables
zhlédnutí 432KPřed 7 lety
I have long wanted to make a detailed video of how the cables in my builds are made, so here we go. My guide for making the perfect length cables, every time. The process consists of 9 steps: 1: Cut wire to length 5-10 cm 2: Crimp one end 3: Put sleeving and heatshrink on, and finish that end 4: Stretch the sleeving, and cut where you can feel the wire ending 5: Burn the end you just cut, and s...
Full timelapse of a custom made Nvidia themed casemod
zhlédnutí 30KPřed 7 lety
This build was done for Nvidia a good while back, but I just found the raw photage of it on an old harddrive, so could not resist putting together a video. It is quite long as I wanted to show the entire process of making what I would call a simple mod, that has custom cables and watercooling, and not much else done to it. It took me around 25 hours from start to finish to make all the cables a...
Project AORUS - A fully watercooled custom built casemod
zhlédnutí 80KPřed 7 lety
Project AORUS was initially thought as a simple show build with some watercooling and custom cables, but as it so often happens I got carried away and decided to custom make my own watercooling parts for the build. The build consists of two custom manifold plates. Plate one that sits on the motherboard connects all the major components such as GPU, CPU, motherboard and RAM into one big distribu...
R80 Prototype No. 2 - A watercooled showrig / casemod
zhlédnutí 236KPřed 8 lety
Final pictures of the build: tinyurl.com/zpaw4m4 To see more pictures and work in progress of the build, please visit my facebook: DesignsByHPS/ This build was a show-rig I did for the Gigabyte Suite at computex 2016. The mod is build around the color scheme of the red/black/white motherboard, and all cables and watercooling has been made to match this. For this build I made a comp...
R40 Engineering Station - A watercooled workstation build
zhlédnutí 2MPřed 8 lety
Ever since I uploaded the Project N.V. video, I have gotten requests to do another like it, so here is my latest project, the HEX GEAR R40 Engineering station. This is a personal build, that serves as my daily work horse for the different programs I use, such as Sony Vegas, Keyshot, Solidworks, Photoshop, Lightroom and many others. The build features the following specs: Case: HEX GEAR R40 CPU:...
Speeding with my Quadcopter Hedwig
zhlédnutí 4,6KPřed 10 lety
Took Hedwig out for a spin to test out the new brushles GoPro gimbal. So far it is working quite alright. More info at www.hps.dk or at my facebook page: DesignsByHPS
How to model an Aquacomputer Cuplex Kryos CPU block in Autodesk Inventor tutorial
zhlédnutí 15KPřed 10 lety
How to model an Aquacomputer Cuplex Kryos CPU block in Autodesk Inventor tutorial
How to model a laing ddc pump top in Autodesk Inventor tutorial
zhlédnutí 4,1KPřed 10 lety
How to model a laing ddc pump top in Autodesk Inventor tutorial
Modeling a XO-16 Chaingun in Autodesk Inventor
zhlédnutí 2,7KPřed 10 lety
Modeling a XO-16 Chaingun in Autodesk Inventor
Animation test of the Titanfall XO-16 chaingun 3D model
zhlédnutí 6KPřed 10 lety
Animation test of the Titanfall XO-16 chaingun 3D model
A mix of colors - A watercooling experiment
zhlédnutí 42KPřed 10 lety
A mix of colors - A watercooling experiment
Experiment Nr. 5 - The watercooling box part 1
zhlédnutí 22KPřed 10 lety
Experiment Nr. 5 - The watercooling box part 1
Project N.V. - A watercooling adventure
zhlédnutí 1,4MPřed 11 lety
Project N.V. - A watercooling adventure
World of Tanks - E-100 - 10 kills, 10.000 XP etc.
zhlédnutí 222KPřed 12 lety
World of Tanks - E-100 - 10 kills, 10.000 XP etc.
3D printed Panzer VIII MAUS tank for the world of tanks - build a tank contest
zhlédnutí 42KPřed 12 lety
3D printed Panzer VIII MAUS tank for the world of tanks - build a tank contest