Video

Price

He probably applied it once and never again in 5 years and it obviously had rust already on it

I am getting ready to swap my engine out. Have one on the way. Appreciate the info. Were you able to leave the AC system intact to avoid having to recharge. Also. Would it be better for me to unbolt The torque converter Before removal because my engine is not frozen.

Damn mine started knocking on 250 miles😢

I thought SS was gonna be it, but... Just got off phone with Blaster support The bad news is SS is just a barrier coating and contains no rust inhibitors or carrier agents to help it migrate\creep Only good for undercoating exposed metal(kinda) Bummer

DO NOT BUY A DUROMAX UNTIL THEY HAVE A WAY TO PURCHASE PARTS! NO PARTS ON WEBSITE OR AMAZON. I CAN'T EVEN GET AN AIR FILTER FOR MINE. CORRECT ME IF I'M WRONG.

why didn't you cut your lineset to the proper length? No wonder it doesn't work worth a shit, how's the oil return cycle suppose to work with all those loops you got going on there.

Now that it’s been a few years, what are your thoughts on NHOU vs. FF and Surface Shield?

I was using Surface Shield and Fluid Film. I’m going to give NHOU (New Hampshire Oil) a go this fall. Nothing against the other two.

Their vise is a 90 day warranty, not a lifetime warranty.

Awesome! Thanks for sharing. I have a park model home that I am converting into a workshop and plan on using this stuff to redo the insulation.

What PSI should I spray surface shield at? I am using the woolwax pro spray gun, like you have. Thank you!

Try Milwaukee's Cobalt hard metal drill bits I seem to work pretty good for me

I like Fluid Film. I really don't have an issue with spraying it. You claim it's too thick. Never had an issue myself...

Not sold on Surface Shield yet. Cost about twice as much as Fluid Film. No real prof it does a better job. I like black coating on the chassis. That rust and grim look aweful on the bottom of your Ford, yet I know it's protected. As I am, I'd rather not see all the crud.

Did you try adjusting carb ???

I just got this for my moms house. It looked really sweet and i got an awesome deal on amazon prime day right now. I wanted to get her something nice and reliable for her power when it goes out.

How is it holding up pros and cons? Is it built to last will it hold up to a beating?

Can you show the propane set up?

They’re $119 with a coupon right now. Thanks for the review

I've been using woolwax for a few years. Mostly just touch up here and there after first year since the stuff stays on forever for the most part.

I use woolwax in frames, especially high wash areas. Thicker, greasier, the only thing iot does get a good layer of dirt stuck to it. Surface shield being thinner I spray into door panels and such.

Surface Shield now 261bucks for 5 gallon bucket on Amazon (in U.S) . Are you in Canada? I bought 5 gallons woolwax 3 years ago. Only needed about a gallon and a half for my pickup truck. That stuff is thick, still adhering to all surfaces. I just touch up spots here and there with cans of surface shield when I do oil changes.I also use the surface shield in panels and doors since it's thinner.

It was acetone that you use that's affecting the finish. The acetone causes the surface to bubble. This is due to the towel people use to apply the acetone. Doesn't matter how much you clean the towel it will still have dirty and little micro cotton balls that will transfer to your surface and ruin the finish.

30hrs!!!!….bent frame and cracks?…. Ya!, you is a butcher!

Thats crazy it comes with a 10 mil

Husqvarna is Swedish for crap. I have had two with nothing but problems.

I mean, you aren't supposed to constantly repeatedly jump cars with these things. They're made for emergencies. My JNC 660 can do at least two cars in a row off one charge. I know cuz I've done that many times. (Chevy S10 and someone else's car). If you are at home you need to attach a trickle charger to your car battery. If your car battery is completely dead you need to replace it.

600 hours on a 2754 Husquavarna the frame broke on both sides. The frame has too many holes for no reason. The frames broke where the little bracket holds the trans to the frame.

Thank you for the follow up! Everyone sang the praises of this vise, brand new out of the box. It's obvious that you have actually USED the hell out of this vise! I'm very glad that it's held up so well for you. I'm never going to use it as hard as you have, so it's now on my shopping list. It'll probably last me the rest of my life! Thanks again!

Looks more like there isn’t any fluid film… like the shop took your money and ran…my truck is constantly oozing it out of my doors and fenders.. 2016 GM I have sprayed it myself every year 👍

I have three cans in the garage and went to use them today and all the sprayed maybe a third and now nothing. Feels like it clogs. Any fix for this?

Mine doing the same i was able to untwist the round little dea on the wirel next to the starter solenoid right next to the battery on passenger side and take the end that is towards the front of the truck not the one close to cab and touch the inside of it which is a round metal thing inside of it and touch to the positive post on battery with key on and starts right up

So glad I watched this. Just about to buy one. Thanks!

Kabota to Kubota! Mandella Efect!😂❤

I got one and love it. Recommend you put threadlocker on the allen screws on the adjustment end as well as the spring-loaded adjustment pin in the back. They will be wanting to back out until you do.

I think you should undercoat in the summer. Probably too cold in the fall to get good results.

You need a 5 horse 20 CFM at least

Have you found a solution?

Very nice generator - I own. Been great. I put painters tape over the plugs. Remove that red bar at the bottom between the motor and the frame - just for shipping. Duromax says To change oil every 20 hours use so any multi days - try and squeeze in at least one.

My 277 has no hydrolics at all and can’t find any videos online j was wondering if you could help

Great video

dang Fluid Film at a shop every year or two? Obviously that did not work. Tragic. If you can only do once a year treatment that probably better do a wax treatment.

That blows ,cut them open and apply it ?

Damn that looks like 💩

what does China smell like?

How did the doyle vice do? Did that little pin that lets it rotate ever break?

Where are you out of? Thanks for the information. I’ll be looking for one next year

HUSKY is $450 30 galón is better engine !!!

I have a 300000 square feet and this mower is excellent especially with all the mods you can put on and honestly you must have sensitive ears or it’s me who has freaking blocked ears but it isn’t that loud