Video

Will definitely give this a try. I'm looking for something that's reasonably tough, but the big requirement, which seems hard to find, is that it doesn't wear off with a bit of friction. I'm not printing ball bearings or anything, but the parts need to be able to rub against each other a bit without powder coming off.

Can use my LD-002H 3D printer with this resin?

笑死 影片很搞笑 我要去訂anti impact了

Would either of these be good for printing molds similar to silicone molds?

Здравствуйте!!! Приобрёл вашу смолу! Она мне очень нравится. Но есть одно но! Точность печати отверстий очень низкая, размер уходит до 0.3мм. Причем печатал и на anycubic photon mono 2 и на anycubic photon mono m5. При разных настройках. Пробовал даже 2.5 секунды засвета делать. И все равно точности нету. Смолу перед печатью нагреваю до 33гр.

I have tried this please dont take a chance. its damage your screen .

Hello, can you explain how to heat the resin before printing? And whether it is compatible with M5S printer or not?

No me compartes el transformer por favor

It's the RESIONE ANTI IMPACT resin?

what would such kit ready printed cost... when i assemble it bymy self..

Is it biocompatible/hypoallergic? Will it also work with Anycubic resin printers?

That's broly design from figure class. I believe you're adjusting the hand which holds Goku and switch to holds the energy orb. Nice painting btw. Hope to see the finish product soon!

what do you do with the water afterwards? Even after washinng models with IPA, they water is now contaminated. I guess having a kettle for resin-water only would be the best case, and reusing it.

please, distribute to Indonesia

Is it possible to add pigments to this or the other F39 resin to create DIY custom colours?

I'm sorry to say, but isn't that completely obvious anyway?

You make really awesome resins :p but you are certenly not a good skater XD :p

EC51 mixed with TH72 what settings?

Promo sm

I have the same action figures. I originally printed with the brittle resin and it was not good at all. I ended up using Siraya Tech Blu and Siraya Tech Tenacious with a 40/60 mixture and it still wasn't the greatest but I was able to put it together. The resin you used seems to be a lot better.

Wow, cleaning the pronto must be something to consider?

Can we get some print settings for the Halot Mage. The majority of my prints dont stick to the build plate and are a mess.

What color do you use for skin tone

blow drying doesnt do anything lol

Th72 is an amazing resin. Not that im gonna try to find if my miniture planes can fly from that height anytime

Cool

If you fall would withstand the impact or shatter to bits?

Rip toriyama

Rip the legend

Is it possible to mix pigments in this resin?

From the mechanical specs on your site, this looks to be a lot more brittle than K.

I have now played around a little with clear Water Fairy. It is really surprisingly fluid and therefore easy to print. Washing is also wonderful, a lot of resin is already flowing away because it is so fluid. But I also have negative things to report. I overexposed a small figure with a sword in the Elegoo curing chamber. At least that's what I assume because the sword broke off with a slight impact. The thicker arm was stable and even slightly movable. The next day, this arm also broke off very easily. I also have some colorants here that I used to color my W90B with. Perfect result with W90B. With Water Fairy, the colorant and Water Fairy separate too quickly. It prints well with colorant and looks good, but after about 5 cm in height the errors start. 12 hours without activity and the Water Fairy floats above the colorant.

i love how the head is made, is there a tutorial ? if i hollow out the head i always have problems with fitting eyes from the inside?

Is this resin available anywhere in Australia and do you still like it? Thanks

your voice is so nice to listen to, I feel like i am enjoying this video as much as I am learning from it. <3 thank you!

this video was about scratches , need more info of the printer. I'm interested on the printer. and the doll is beautiful.

vs w90b?

Saryatech mecha white sounds like the resin you may need, it takes longer to cure but a more scratch resistant surface.

Nice, thanks for showing ty he experiment, I wanted to test abs like resin. Where did you get the stl files? Could you give me some suggestions?

Quem é do Brasil não comprei essa resina. Nesse período de férias da china. Eles não estão enviando nada.😮😮😮

Awesome, thank you for the video! A little trick I use, is removing the supports before curing. I have a sealable bin with a garbage bag inside that I process the prints in, and so after the print is done I just slip on my nitrile gloves, transfer to the bin and pull the supports off (they come off so easy this way without leaving behind any nubs); then I place the prints in my ultrasonic cleaner (using propylene glycol now as I've read it works just as good if not better than IPA and is much safer) which now fit better sans supports, and then transfer to a clear plastic container full of water which I cure in my UV curing station (curing in water can help cure the prints better). I'm very much looking forwards to making some BJD dolls. I've always loved them, but they tend to be fairly expensive - and I love the idea of making some on my own!! :)

Oh so you use some type of rubber strings from inside to keep the joints together? That's neat. Have you tried magnets ?

Which resin is better for joints. Because after some time the joints go lose. Do you have any solution for that?

Omg this is amazing what 3d printer do u have?

what is measure hole tool? can you share please?

Can I use this technique with all the resins ?

Where do I get this ?

After 5 month it is also ok, i have checked...

where do you design body

Print setting?