Video

That is so true! I went to Off-Rodeo year one when they were all nice and new, but as you said, I bet they are showing some wear now. Thanks for watching!

They are fantastic. Did they offer a non-hole solution? There are other solutions out there without holes and just uses double sided tape. For me personally, I have no plans to ever remove it so a tiny hole in the dash you will never see is no big deal to me. If I sell the Bronco it will go with it. If Ford had this as OEM option from the factory would you care if there was a hole you couldn't see holding it to the dash?

That is great! As long as it fit your needs and you enjoyed spending time building it is all that matters. Hope you have a blast in your ride!

Hello, it is a simple installation. Thanks for watching. The battery is a Goal Zero 1500X and has room on the front and back, although it won't fit oriented the other way in the JCR shelf. The battery is plugged into the power outlet and recharged off the Bronco alternator while driving.

Thanks! Hope you are out having fun in your Bronco!

Of course, we'd all love to purchase a high-quality, tailgate table at a fraction of the price, but the cheaper tables just don't match up. This is by far the best tailgate table available. Made from high-quality stainless steel with incredible attention to detail, from no-drill mounting to its finish, function and no rattle while hammering on the trail, it's worth every penny The only comparable option is the Goose Gear and it's similarly priced. If this isn't within your budget, there are many cheaper tables available. I hope you find one that meets your needs and budget!

Yeah this is off the cuff. Me just opening my mouth and words roll on out.... LOL

This is not the TrailRax recovery board mount. Theirs will clear the back door if you slide it farther back but the boards will extend past the rear of the Bronco. The Expedition Essential solution shown here is a way better mount but doesn't allow you to adjust it back farther on the TrailRax sidepax to clear the door unless you have a two-door Bronco since the rear is bigger. Hope that clears up any confusion.

@@dangermtbbronco yes thanks! I have a Gobi rack / Molle panel and haven’t bought a mount yet I’m looking at Racks Brax or waiting for Gobi make one. I bought the Molle for the recovery boards so I’m hoping to figure it out soon!

@@RebeccaTiffany1 Great! Sounds like you will figure it out. Goof luck and have fun in the Bronco!

@@dangermtbbronco thanks!

I bought this mount before TrailRax had their mount. I did look at their mount after because this mount Im running the boards block opening the rear passenger door on the 4 door when mounted not a huge deal for me and it is very secure. The trailrax mount has the issue of extending the hoards past the back which I don't like how it looks but still A good solution and way cheaper than this one.

@@dangermtbbronco I appreciate the feedback. I've even considered mounting them on top. I guess I'll bounce it around a bit until I'm ready to pull the trigger

Yes! Long time MTB who loves solid tools. The Parks never disappoint and thanks for subscribing. You must ride as well?

@dangermtbbronco I've got a Trek Roscoe 8 but I don't get out much. I'm so far out of shape. My Bronco should be here next month then maybe I'll get the bike out on more adventures with me and the Badlands

Not an issue it is covered in a durable textured coating. Unless you are taking your rig in the lake rot isn't going to be an issue. There is an aluminum floor from American Adventure Labs called the MASS system worth checking out if wood isn't an option for you. Thanks for watching and commenting.

Hi Sorry I didn't shoot the turn off but it is on Burns Canyon rd at the split before you start climbing in elevation. Ill thow the link to that section from OnX for you below. I would stay on Burns there was a few more difficult sections on that turnoff since we hit it right after the rains. Might be easier now. View it in the onX Offroad app here: onxoffroad.app.link/S9OLgPKGfEb

Thanks for watching! Yes, I am running the Icon Stage 8 suspension kit on Method 705 wheels with BFG KO2 35s. Made high speed desert and fire road stuff incredible compared to stock Sasquatch suspension. If you haven't yet please subscribe for future videos I really appreciate it and hope you are loving your Bronco.

4x4 high? While flying thru the sand

Thanks, I am still really loving it. Interesting idea. I know people use HDPE for applications like the bottom of sliders. I need to learn more about it to know how great it would be for this application. I bet HDPE would look pretty bad after a few months of sliding gear in and out. I assume plywood is cheaper for Goose Gear and likely has a much smaller carbon footprint. But again, I am not knowledgeable in this area. Expedition Essentials makes a great option from Aluminum.

How did it go?

@@dangermtbbronco this was my fourth time going wasn’t a beginner trial. It definitely had its harder spots. Before we got to the end of the desert beginning of the mountain, we came to a rocky spot and it was intense. We had to turn around and go a different way. There’s also a flipped over Dodge in that crazy rocky area looks like they might’ve pushed it off the mountain

Yeah the rains have changed it quite a bit this year. Glad you had a great time! That rocky spot I think you are talking about the trail splits into left and right there it seems. We just drove through the middle over the rocks to get back onto the other trail. Always sucks seeing a rig flipped over.@@NobodyImportantx00

@@dangermtbbronco that’s wasn’t a beginner trail. That’s my third time really going somewhere

@@NobodyImportantx00 Yeah it is a moderate trail rated at a 4, but after the rains a few sections are a bit tougher.

Really well. They are still holding tight and look great. Really important to take alcohol and prep before attaching.

Hi I am using a custom mount I made. Just a piece of metal bolted to my roof rack then the whip bolts onto that. I didn't want the whip hitting the body so I mounted it high on the rack. There are a few quick release mount options on the market as well. I think I will end up going that route and mount the flag to the front trail site with the bracket from Trailrax.

This was after this past Saturday. The storm changed the trail considerably and made Burns Canyon impassable without taking the 2N703 Off shoot.

@@dangermtbbronco yeah idk the trail names and what not. But I remember finding that trail out.

Great idea!

Thanks for letting me know. I updated the link to a new option that is exactly the same and at a great price. Hope that helps.

Hello, everything you see is from 67 Designs. The magnetic mic holder can be bought from them as well. www.67d.com/products/magnet-mic-holder

High Patrick I have not made a video about the shelf yet. Great shelf from JCR Offroad.

You are going to love it!

Hi I actually listed a different version the video description that is pretty much the same thing. Hope that helps!

Value can mean different things to different people. You could make your own cheaper version of this, but it probably wouldn't be as good and likely take a lot of time. This table is bombproof! Really strong and well-made from quality materials and is dead silent when off-roading. There are cheaper ones out there, but they often require you to drill your tailgate and didn't meet my needs for one reason or another. For example, they had holes in the tabletop, molle panels, or two shelves, which I didn't want for many reasons. Your needs could be different from mine. I hope you find one that's worth it for you. Until then hope to see you on the trail. Hell, I'll even pour you a glass of bourbon on my table....

Yeah I actually burned my logo into it but agree the Bronco logo would also look great. You can see mine at instagram.com/p/Cn5ce0aPZPi/

@@dangermtbbronco looks great!

Yes very well. An dIve been on some rough roads at high speeds, hit them with the pressure washer etc. Still holding strong and look the same.

Hey Derek, These are not the ones I bought but they are the same thing. a.co/d/56OVXdm

@@dangermtbbronco thanks so much bro I appreciate it!!

The cutting board is made of bamboo it is very strong and it rests on full width stainless steel channels. Not sure how much weight you need to put on the board but I'm confident it has plenty of strength for the fattest of steaks, food, bowls, lanterns, etc.

Yes!

@@dangermtbbronco Is this your Bronco?? Also I subscribed.

@@thereal.mohammad Yes, that is me racing my Bronco. So fun! Thanks for subscribing truly appreciate it.

@@dangermtbbronco No problem mate, also nice Bronco!

​@@dangermtbbronco8

Hi John, Great question. I am considering buying that same battery system from AAL and think there is plenty of room for wiring under the Goose Gear Rear plate. The only potential downside is that you don't have the same full access since the Goose Gear plate only allows you to flip up one side compared to the factory. But there's probably no need to access the batteries and wiring once it's installed unless you have an issue, and if so, you could easily remove the whole plate, which I have had to do several times for other gear installs. How do you like the AAL battery system?

@@dangermtbbronco That gives me more confidence that this solution will work; thanks. I just completed the AAL install about a week ago so I don’t have any trail experience with it yet but I like the look. There’s a thread in Bronco6G where I discussed it with others and uploaded pics (I’m BroncoInTheATL).

@@JRMulcahy Thanks! I commented on the 6g thread with a question for you.

Nope check my other shorts for some classics.

Great idea! Thanks for sharing.

Hey Brian I use the Rhino Rack Stow Its. Love them. Really durableand they lock. www.rhinoadventuregear.com/products/rhino-rack-stow-it-utility-holder

Hi Greg, I am in Lake Elsinore. Follow me on Instagram @dangermtbbronco and you can message me there or you can join my Facebook Bronco group at facebook.com/groups/782323839494922/. Let's connect!

Thanks Blanco! Look forward to your video s always!

San Diego The Whiskey House

@@dangermtbbronco oooh! The one that’s in the Guinness Book of Records! Yes! It’s already on my bucket list.

@@eventyoursofspirits Yes I think you are right!

Was really fun.

This is Sand Hollow UT