Video

I got it on Amazon, it’s the same size as the original Coleman tire: 19x7x8.

Get the predator 212 racing

Or at harbor freight it's 224 max performance is on sale 159 right now

I just bought a 30 series torque converter from amazon. I'm not sure the exact one I bought, but here is one I found. www.amazon.com/Torque-Converter-Clutch-Predator-Replacement/dp/B07S3TX4C5/ref=sr_1_1_sspa?crid=2INLJVVG3MDGU&keywords=30%2Bseries%2Btorque%2Bconverter&qid=1697060931&sprefix=30%2Bseries%2Btorque%2Bconverter%2Caps%2C95&sr=8-1-spons&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1 Keep in mind you will have to raise the engine about 1 inch if you have the same bike as me. I used 1 inch square tubing from gopowersports, but you can get square tubing from the hardware store yourself and drill holes if you want it cheaper.

I have a 22mm Mikuni carburetor, header pipe, governor delete, and a torque converter.

No problem, glad I could help.

Wear a full helmet, and always obey traffic laws. I’ve been pulled over 3 times. Luckily I was given warnings. Just be careful.

Yes, the big Coleman bikes all use 420 chain. Depending on what rear sprocket you have will determine the size clutch you need. If it’s the stock 50 tooth rear sprocket it’s probably not good for a 10 tooth clutch, it will burn up pretty fast. I’d get a 60 tooth rear sprocket if you are riding anything else than street.

@@WhiskersTheFish okay so what clutch do I order for stock 50t. I don’t do hills just ride trails and hardly street . I have a 212 predator with 50t rear sprocket

Do I get the 3/4 420 chain 12t?

Also a spacer for the shaft?

If you have $50-$60 I would get a max torque brand clutch. If not, I have gotten some Ok clutches from Amazon for around $25.

How many teeth are on your clutch and rear sprocket, and what size tires do you have?

@@WhiskersTheFish the clutch sprocket has 12 teeth and rear is 50 teeth. Also do I think it was smoking because of the chain because the chain was a #40 and the clutch is supposed to have a #35 cause if that’s the problem I am super dumb and wasting your time.

@@RealestateKingThe1 The chains should be the same. 40 chain is larger than 35 chain. What size tires do you have? Is your bike a large mini bike or a classic sized one?

@@WhiskersTheFish oh it is large Minibike. And tire size is 19x7. 00-8

Also it says the clutch is a 35 chain so would I need to get a 35 chain for it and if I did would it fit on my Minibike. And again thank you so much for the help without your help I would’ve been stuck.

The predators use standard size bolts, 5/16″-24 would work. Not metric. If you can’t find the exact length, go for a slightly longer bolt, you can always add washers later. Also please use a lock washer between the shaft bolt and shaft/washer. I see too many videos of bolts coming loose and things breaking.

I recommend buying bolts from your local hardware store. It’s much faster, and easier to see the bolts in person. They sell bolts for predator engines on Amazon but they are usually $6-$10 a piece and with shipping that’s ridiculous for a single bolt.

@@WhiskersTheFish do you know what size bolt you put on it looks very good. And thank you for all the help

Np, mine is a 5/16”-24 grade 8 bolt I think. Mine is a little too long, I used washers though.

@@WhiskersTheFish oh alright thank you so much this will help a lot

The large Coleman bikes use 420 chain. This is the one I am currently using. Pro Taper 420MX Premuim Gold Series Chains - Lg. 134 a.co/d/dNVgCIw

Thank you what size is the nut you put in the shaft to lock in the clutch because I also have a predator 224 but I don’t know what nut goes in the shaft so I can keep the clutch in place.

@@WhiskersTheFishyo hi again, I just tested my top speed and I got it to 54mph but there is one really bad thing. The clutch was super hot and the chain kept slipping on the sprocket. Do you know how to fix it or do you know what was wrong and thank you so much.

Got it from amazon. The lens fell out because the vibrations from my bike broke the glue inside, so I duck-taped it. www.amazon.com/RYANGO-Adjustable-Handlebar-Rearview-Handlebars/dp/B09MH2TP65/ref=sr_1_13?hvadid=616931589040&hvdev=c&hvlocphy=9021515&hvnetw=g&hvqmt=e&hvrand=15280821728380221897&hvtargid=kwd-738052173&hydadcr=24664_13611849&keywords=mirror%2Bbike&qid=1684098919&sr=8-13&th=1

I'm not familiar with the Android operating system, so I'm not sure how to fix this problem for it.

Got it from Amazon like 3 years ago. It’s a motoos 66cc 2 stroke engine kit.

What size is your rear sprocket?

Me as well, but I have noticed that it seems as though the 224 is too powerful for these clutches and they are most of the time trying to engage even while idling.

goat 🐐 finded mission passed

Just wait until the next video, maybe I did install a 60 tooth sprocket.

I actually switched my engine because my Chinese Torque converter pulley came off, twisted the belt, and in the moment damaged my old engine's crankshaft. It was put out of alignment and would knock when running. I don't think the flywheel would be safe to use anymore; I'm not going to risk it.

Yes, Several times actually. The first time a cop was just behind me. I had rode into a neighboring city/town which has much stricter cops. In my town they really don't care too much. He just wanted to follow me home to make sure I wasn't riding anymore; just gave me a warning. The second two times were because a "Karen" called the police on me and my friend. We were riding on the bike trail and she jumped out in front of us with her kid and dog to try to block us. We sped around and nearly avoided her, when we came back to make sure everything was alright, she had called a sheriff. The SHERIFF told us it's ok and that we can ride in the street but not on the paths, Karen was pissed lol, thought we were going to get arrested or something. Later that day, as I was riding home, the same Karen must have called again, and a very rude and unprofessional female OFFICER (not high authority like sheriff) pulled me over. The Karen must have over-exaggerated the story because the officer told it to me like we tried to run them over. The female officer told me I can't ride on "her road' and threatened that she could have me detained and my bike impounded if she "wanted to". When I asked if I should push it home or ride it home she responded with: "Do you really want me to answer that question"?. Then she sped away and skidded her tires, almost running over my foot. I was going to file a report to my village's local police department, but since riding an unregistered, uninsured, motorcycle with no license is pretty illegal, I let it pass. Really it just depends on the day and if the cop is willing to let you off or not. I still ride though, passed many cops lately and they haven't seemed to care. I'm sure they have better things to do lol, especially when I'm following road rules, signaling with hands, and wearing gear.

If you are talking about taking off from a dead stop, I would not recommend it. I've just barely done it once. These clutches are meant simply for engaging and letting go of the engine's power, they are not meant to slip. It will not only take forever to take off, but it will very quickly destroy your clutch pads. If you cannot pedal due to an obstruction or mods, consider one of the wider pedal crank sets to extend your pedals out further.

I would try to really not have more than 2. The more you have, the less strength the chain has, and the more it is likely to come apart. I would just be careful, but if you can try to, only use 2.

@@WhiskersTheFish so ur saying it’s super likely for something to happen with 3 master links ?

@@WhiskersTheFish and btw is there like a upgraded/better clutch I could get and use for the straight chain so the clutch doesn’t go out with in a couple weeks of riding hard?

@@troyholland3436 The best way to go is a torque converter. You can buy a max torque clutch for $60 or something. But an amazon torque converter costs just the same and will make a world of difference. Higher top speed, no revving RPMs, better torque.

@@WhiskersTheFish but would u say the chances are high for the chain to come off with 3 master links ?