Video

i suggest scouting for 80+ certified psu for your rig thanks for watching. please share and do subscribe!

ideally, should be the same but i don't have first hand comparison thanks for watching. please share and do subscribe!

Thanks. i Prefer branded RX 500 Series.@@silentowl1305

have you attempted? thanks for watching. please share and do subscribe!

Yes i attempted. Now it's on repair shop. I am having overheating issues. @@silentowl1305

sorry to hear that. i think a change of cooling fan and heatsink prior to oc might have a different outcome thanks for watching. please share and do subscribe!

thanks for watching. please share and do subscribe!

it is a gigabyte b450m-ds3h v1 mobo thanks for watching. please share and do subscribe!

theoretically, any lga 1155 mobo which has an x16 PCIE slot is ok with this gpu. to be sure, and as an added step, do due diligence of checking the specific mobo compatibility list and also update the bios to the latest firmware thanks for watching. please share and do subscribe!

ideally it should work on a 144hz monitor. the effect of the fps is dependent as well on the intensity/quality of the game and how gpu/cpu bound it is thanks for watching. please share and do subscribe!

@@silentowl1305 ah sabagay , nakita ko lang po kasi sa google.

the card is an RX 560 XT thanks for watching. please share and do subscribe!

In part 1, czcams.com/video/K9pM0aeo_2U/video.html, the overall system draw observation is shown thanks for watching. please share and subscribe!

theoretically should be the 1650 thanks for watching. please do share and subscribe!

no actually. I have put in the description box that in my haste to setup the vidcard, i used the cable that cable with it. for my setup, it is redundant as my psu already has a 6pin power cable for it. thanks for watching. please share and subscribe!

thanks for watching. please share and subscribe!

i have updated the description. in addition and as a tip for improvement, ive used also, post video production, this one: packagingdepotmanila.com/products/double-sided-tape-foam-type?variant=32834803925070 The foam tape is to compensate difference in depth of the rail where the side panel slides. this is to ensure that the side panel stays flush and level. the top and bottom rail of my side panel is deeper compared to the left and right thanks for watching. please share and subscribe!

​@@silentowl1305 Thanks! this is the most useful video I found! Ever since I upgraded my pc, the temperatures were very high even with 6 fans (3 in and 3 out). They were always above 85 degrees Celsius. I tested by removing my glass panel and the temperatures during heavy gaming on 4k ultra settings dropped to just 57 to 62 degrees Celsius. It's such a huge difference. But not many people do the DIY mesh side panel. I am excited to see results after I install it as well. I will definitely use your video for reference! Thanks!

the diy mesh side panel on my end was a way to reduce temp in the pc case without adding fans. my setup do not have dedicated fans for active push-pull/input-ouput of air for ventilation within the case. am just relying on the psu fan and the cpu cooler fan to move air inside.i was eyeing for an optimal way to cool it down

my apologies as i forgot to put the links. i have updated just now thanks for watching. please share and subscribe!

hmm. not sure but checking the specs for FSP600-80GHN, it should have 6pin connector by default. just to be on the safe side, my opinion is to upgrade. thanks for watching. please share and subscribe!

in both test setup, the proc is on stock clock (not OCed) thanks for watching.please share and subscribe!

just to clarify, you got an aixurix rx 560 xt, and it got detected/shown on devmgmt as rx 470? if previous gpu drivers were not removed, try to remove them first via DDU utility thanks for watching and please do subscribe!

to clarify, which app icon are you referring to? thanks for watching and please do subscribe!

i dont have first hand experience yet with bosston 700w psu. i think it should work if you dont have much peripherals and not doing any OC or plans of doing it in the future. but if you have the budget, invest in a better psu that is 80+ certified thanks for watching and please do subscribe!

i am after the core and thread count. had i gone for 2nd gen ryzen, would have taken a ryzen 2700. come to think of it, i might have considered used server xeons for my computing needs and budget thanks for watching and please do subscribe!

still ok as of the moment. should work ok with i7 3770 thanks for watching and please do subscribe!

the brand is relatively new. the durability is still in question. as to the question of switching and based on the specs and testing of this aisurix rx 560 xt card, it can easily surpass the capability of a gt1030 at a cost of higher power consumption thanks for watching and please do subscribe!

@@silentowl1305 Thanks, I'll give it a try!

if you are referring to PCI-E connectors, the psu i have (corsair gs600) has 2 8-pin connectors. if you got confused on the setup part, i had the mistake of still using the included connector/adapter of the videocard when i could have just used the native connectors of my psu. I have included it in the description thanks for watching and please do subscribe

so far, no issue has surfaced yet. still ok as of the moment thanks for watching and please do subscribe!

yes, i was on athlon 200ge when i installed the r600 m.2 sata ssd thanks for watching and please do subscribe!

i suggest upgrading to a newer psu with a 6pin or 6pin+2pin (8pin) connectors thanks for watching and please do subscribe!

www.lazada.com.ph/products/used-amd-ryzen-7-1700-r7-1700-30ghz-eight-core-sixteen-thread-cpu-processor-65w-yd1700bbm88ae-socket-am4-no-fan-i2307522361-s10446131606.html? thanks for watching and please do subscribe!

yup. bit of an odd card and had the same impression when i first came across it. you may check my videos on it thanks for watching and please do subscribe !

It was a chinese-only retail card so not a lot of people outside of china knows about it.

you may check the motherboard specifications with regards to the port (PCI-E x16 slot as a requirement) and also the layout of the components to prevent any issues with clearance or graphics card blocking certain parts of the mobo thanks for watching and please do subscribe

i have yet to test this as i dont have an adapter/converter or extra monitor with the ports thanks for watching and please do subscribe!

indeed there is detection anomaly thanks for watching and please do subscribe !

i used the auto detect and install windows tool for win 11 and 10. it can be downloaded from amd.com thanks for watching and please do subscribe!

@@silentowl1305 hehe nakabili narin po ako at natesting ko na, dati na kong nagamit ng amd driver kaya di ko na need magpalit nung kinabit ko siya

Naging skeptical lang ako nung una kasi sa china lang nirelease yung 560 xt, pero all good na ngayon.

i havent come across this issue as my desktop is not configured to get automatic windows updates. thanks for watching ! please do subscribe

in most AAA games that are cpu bound, the athlon 200ge is a bottleneck thanks for watching and please do subscribe!

still fine though. i just noticed that when playing star wars battle front 2, the fan seems noisy and spins faster than usual thanks for watching and please do subscribe!

should be ok. but i would advise overclocking the athlon 200ge to compensate for low core count and low thread count thanks for watching and please do subscribe!

should be ok. better if the variant's base clock is greater than 3.0ghz thanks for watching and please do subscribe!

im not much familiar with a6 9500e but checking its core/thread count, i say it may suffer a bit and will be a bottleneck i believe. but am not 100% sure as i have limited info and no 1st hand experience with the proc thanks for watching and please do subscribe!

@@silentowl1305 ok thannks

i prefer to go to the bios and disable the on-cpu graphics of my athlon 200ge. For other processors which do not have built in graphics, it may not be required. thanks for watching and please do subscribe!

i think it should work with i5-7400 thanks for watching and please do subscribe!

i have yet to check on this as the card's 8gb vram seems to have potential for this use case. thanks for watching and please do subscribe!

sorry to hear that.it is still up and running on my end but always on the alert for any sign of failure thanks for watching and please do subscribe

@@silentowl1305 what your psu?

it is a corsair gs600 600watts thanks for watching and please do subscribe!

napawarranty mo ba?

Ano PSU m?

for the athlon 200ge, yes. It was overclocked to 3.8-3.9ghz thanks for watching and please do subscribe!

am using a Corsair GS600 600watts psu. The psu depends also on the devices you have on your setup. Mine doesn't use pc case fans and mechanical harddrive so that somehow reduces the overall load thanks for watching and please do subscribe

Also do you think its good with my i3 3240 cpu

I hope no bottlenecks

i think the proc would cause a botteneck. i suggest to plan getting a newer set of proc and mobo thanks for watching and please do subscribe!

@@silentowl1305 thx for the suggestion, I save up for an i5 and a better mobo

Yes, should work thanks for watching and please do subscribe :)

@@silentowl1305 560xt or 580 po anu po ma recommend nyo?

the rx 580 should be better. it all depends on your purchasing plan/power and your gaming needs. the rx580 should theoretically play more AAA games with better FPS but at a cost of higher price and power consumption. hope this adds some insight to your plan thanks for watching and please do subscribe

Nice! maybe try to check the ventilation in your rig. Im also eyeing the possibility of modding my sidepanel and putting pvc mesh thanks for watching and please do subscribe :)