Video

I have the same issue with my C200 Kompressor from 2001. How can I be sure that the MOSFET is burned? The flap is never moving, it is always opened. When running diagnosis there are 2 faults only - Camshaft Position Sensor - no message and MAF Sensor fault. I checked both faults and sensors seem to be fine and also voltages and current going in and out look good. Is there a way to be sure it is burned MOSFET before doing any disassembling of engine's ECU?

Hi Few days ago the blower stopped to work. Then a minute later worked fine again, the again not. Today i have changed the blower fan, but the Symptome is the same. What do you think, what can be wrong?

Any tips on getting ECU repaired…best mechanic?

I have installed this chip on a Passat 2.0 TDI, and I have been playing with its adjustments, but now I no longer remember the initial settings it came with. Is there a way to reset it to the original factory settings? I am referring to certain turns of the screw to its maximum, and then adjusting from there.

My Pop starts well in winter but not so good the rest of the year. I've had it checked at the garage, they ran a bunch af tests and came back fine. I want to sell it but won't be able to with this issue. The tip you suggested for winter, i figures this out and it worked for ages but now it doesn't work. Any advice?

Thanks for the video.🙂. I have an intermittent Limp Mode on my 2002 c220 cdi. Any ideas?

Good job.

if you're on a non chromium based browser (i.e. firefox) it seems it doesn't work

What’s the part number please Sir? Thankyou

So cool sorry for your loss

Idk nothing about cars but this is some intelligent shi

Now go and change the near side front indicator bulb.

Does it work without wifi?

Dyno it before and after ? I suspect it just makes your car overfuel or nothing at all . I have a mk8 civic also I'd be interested to see if it's actually doing anything at all . Reminds me of the chip things we all used to put in out mk2 escorts etc in the 80's 😂 have a good week ... tony

The mk8 civic does feel extremely sluggish for a 1.8.. I'm thinking of getting one honest opinion is it worth it?? Keep up the great videos I'm a big fan of the mk8 ones as I have the same model but in Milano red

hello mate, what else had to be disconnected? i did the nuts and bolts, pin and clip and also the clip for the wire loom on the side, but the assembly wouldn't come away from the activator bolt. any advise appreciated :)

Hi! I found this video and followed the exact steps. I ve changed the mosfet and after I reconnected the ECU the car it's not starting. The dash lights comes up, the key connects and works, but when I try to start it doesn't do anything. It was starting before I removed the ECU :)). Any ideas what could went wrong? Thank you!

What size are your rims

My '06 mk8 radiator fans come on regularly. Kind of used to it now. To be fair my temperature guage never falls outside of that normal position so I just assumed it was the norm.

I had a 2011 1.3 and these cars mpg was fantastic..I bought a 2018 Auris Hybrid 1.8 but my god do I miss the mpg and practically especially the rear seating areas of the Civic..Great car and reliabilty well in the 10years I had it only thing apart from the consumables was a battery!..my fault because I left lights on!-...

Sorry about your father 😔What a beautifully built workshop that is. its stunning. I remember when i was a kid i too used to love going in my fathers shed in the garden and garage to build things and experiment. Really miss them days. Top work again, Thank you for the shed tour, love that old long wood saw and its history, still looks like it would cut thick beams to this day. Ah the good old days 👍🏻Keep up the great work pal the videos and editing are excellent.

Great video. Thankyou. How did you manage to remove the retaining clip? I've removed the 4 nuts and 2 bolts as you advised, just that annoying clip. Thankyou Take care Kev

Not work

The aerial base on the roof contains a circuit board . Wet gets in and fries it. Just ordered a replacement base for my daughters 500 off ebay for £12.50.

Man that Civic looks so good with all the mods you have done. 👍🏻

здравствуйте моя машина w202 c230kompresor такая же проблема нагнетатель работает на холосом ходу та же проблема у меня с мосфетом?

If the Aircon is on the radiator fans will run. The cabin fans are connected as when you switch them off the Aircon also stops. The fan speed "cabin "needs to be running for the Aircon to work.

Re 3:26 my 06 civic 1.8 did that with the fan, from what I know when I was on the civic forum they all seem to do it. I also found it odd.

What Sir are those yellow cables running behind your front grill for?

Start saving money for the next repair😂😂

600 dollars??

Excellent "How to video". Really good. Extra tip - Remove the clutch pedal first (as shown later in the video) Mine was impossible to remove without. Possibly due to a larger wiring loom in the way.

It’s hard to see and find Honda in this condition! Great job! Looks so easy !!! Here in Malta 96 % Civic are all faded plastics! I don’t know why nobody fixing like this? Lazy people i guess! Cause of this bumpers, when i see faded one i lose interest in the car. I have Honda Accord 2.2 ictdi, much better with bumpers. Only problem with them is front bumber which can go down few mm, but i ven that can be fixed. It’s barely noticeable

Hey matey just seen the video, great explanation hand on heart. I’ve got a Honda HRV 1.5 (130bhp) been wanting to atleast make the the throttle response faster. Have you seen the other box by the same brand? It’s much more powerful apparently but I don’t want to get that one as there’s a video for this chip haha. What do you think?

Hi, i bought this thing last year the free update is for two year. After that can I still use the special function?

Great video, I’ve found the tips really helpful. Thanks for your content production

Great I was just going to spend £54. Thanks. 😊

I love the vinyl on the back. It makes it very sporty. Reminds me of my Alfa Romeo GT

I have a 2005 SL500. I got the same check speed sensor for the front right wheel ( US passenger side). I'm going to replace the sensor but am having problems understanding the way to access the wheel-side sensor connection. I wanted to ask if you ever looked at the sensor connection for the front wheels? I don't understand a simple way to access the sensor without having to disassemble a lot of parts to get to the sensor?

What phone holder do you have please Sir?

Seems removing the carpet panel would've been easier and the right solution.

Hi buddies, Have question Today i did replaced second hand diesel injector and did coding. Procedure was done on injector 4 , everything was smooth, but.... now when i checked what code was writen to system - now shows 2 codes on injector 4 . Why's like that that first code even doesn't looks like from old injector, second code from new injector which one i did replaced today. Why now on injector 4 i have two codes? Shows like that 4ZFGGG-9FFGGG 9FFGGG its new code. 4ZFGGG unknown code even on old injector which one I removed was different code. Why i have now like that? Thanks

Does this work if I don’t have a turbocharge

Good video, but do the CR PRO or the CR Max have ALL the functions which the car brand specific V3.0 version has? I read some reviews from buyers who own Audis that the cheaper Icarsoft VAWS V3.0 could perform activation tests, injector codings, adaptations and air suspension management, while the CR PRO and the CR Max could not. Someone mentioned that the PRO and Max were limited in memory, hence the cheaper V3.0 specific to a brand can do more because it uses less memory than all car brands together. You seem like a smart guy who could check that out, could you please see if this information is true? You got my like for the video, if you get back with verified information I will subscribe for more. On a side note, the CR PRO + seems to have more functions. Would it be better than the Icaesoft VAWS V3.0, functions wise?

Hi mate….what do you do if the compartment is locked and you do t have the zip tie? Do you just have to break the lock?

who would of figured?

Good hack but won’t oil knacker the rubber at some point in time.

i just got a autel i had one before a older one i find that autel you can do more programming wise never really got into the others :)

How do you know if you have a subwoofer problem, i have a strange noise emitting from a speaker not sure if it is the passenger door or the subwoofer, and it does not happen all the time.

At the 18 minute mark, you are indicating that a small gauge wire will reduce the current. That is not a good thing. Fuses are used to protect the wiring (and devices) from overheating and resulting in a fire. The overall size of the wire does not tell you the actual wire gauge, the printing on the side of the wire insulation does. If you are using a fuse that comes with wires attached, the wires will be the correct gauge. Never connect a smaller gauge wire to a larger one. Larger gauge indicates a physically larger wire, but the gauge number will actually be smaller and vice versa. For example, a #10 gauge wire may be rated to carry 30 amps, while a #18 wire might be rated for just 5 amps. To be sure, search on-line for "wire gauge chart". Thank you for reading.