Video

I want to know how this happens. I drove my CRV out of town the come back and it is chewed up like that. Never heard a sound.

Thanks bro. It's working. My HRV is alive 😅. I change distributor COIL. Very cheap

I'll be doing this soon. I replaced EVERY steering part, added $250 arm supports and still have almost an inch of play. Wasn't like that before my lift and alignment so I'm thinking they messed with it.

Why does an engine need a knock sensor in the first place. I replaced one on an Audi recently and it solved the hesitation problem it had. I dont think older cars had them

Great! I'll try that suggestion to check fuses. I'll give you a feedback if it fix it.

Thank you

I doing my first Timing on my 94 Prelude and if I could ask on what is that metal rod your sticking into cylinder one?

I need some help!

Let me understand this properly. You just spray a head gasket? How this supposed to help?

Ummm....maybe fix the leak then change the tile ? 🤔🙄

Great video 🏆

What if my screen is just black

LOL one got you

Thanks for showing how to start it

CZcams like Google these days doesn't know the difference between tools. The end is near.

Thank you for the help! No idea that was there

Thank you This worked!

Guyana man..

Saved me TONS of frustration!!! Thank you!

❤

❤❤❤❤

Thanks it helped me, i removed that fuse to shut down the annoying alarm sound when my battery was dead and i was trying to jump start. Then i interested that fuse and it worked. Now my shifter is working as it was before. Thanks alot

another video where the guy replaced the timing belt tensioner said didn't have to set the timing after replacing it.

Does it hurts while removing these😢😢

Too heavy a coat. Gasket ridges usually face Up

What if when star the car the blower is not starting but when I kick or punch the blower then start running

The thing you are takling about that controls idle is the IACV it's on the other side of the manifold. the black box is what controls the secondary intake runners or IAB (intake air bypass) "butterflies" you are correct about it being a "mini throttle blade" inside the manifold but as for its function, you have that mixed up with the IACV (intake air control valve) -that does not use vacuum, it is electronically controlled and allows more air into the manifold based on electrical load as seen by the ELD (Electronic Load Detector)

Thank you, it worked on my honda 2005 pilot. Instead of oil I used grease.

The service manual says never reuse gaskets. It says not to spray any other spray gaskets on genuine gaskets.

thank you this saved me 300 dollars of labor the mechanic was charging .

bro~! the perfect fix! thanks kindly. subscribed.

Thanks! You provided the clearest instructions for testing the distributor components I have read or viewed. Thanks again.

note that the rotor screw can be very tight, be very careful, use your best philips or better yet japanese JIS. I messed the head of the screw up, had to drill it and use an easy out to get it out, what a job

So easy, thanks, we had our door on the DVD player below the seat of our pilot open.

Noticed the last couple weeks that my lights didn't seem to be as bright as they used to be and then dark early this morning realized that my brights weren't working at all, just the low beams. If it was just one… but with both at the same time this seems like most likely culprit. Still have indicator on the dash by the way to indicate that they are supposed to be on… Just about always find disconnecting something (by hand especially, but otherwise as well) where you "just" have to press the tab to be the worst part of doing these things myself… but now I have an idea of what comes next. Thanks for your video, very helpful. (2003 Honda Accord LX, now approaching 304K miles.) (And just checked again, still not working, but noticed a relay that's probably supposed to turn on the brights is still clicking when turned on or off.) Edit: The bad news is that pulling the old one out and cleaning it up (it was just a little dirty on some of the tracks) didn't make a difference. The better news is that a new replacement one did the same thing. Ergo, the old switch seems to be okay. And the fuses were all intact so not that either. So… the really bad news is now I have to try and replace the bulbs (presumably one and then the other somewhere along the line failed), which is the biggest pain in the butt I've ever gone through in the past with this car (the fuel filter being a close second), and another decade probably won't make it any easier, as the bulb socket thingies get frozen solid in there and the wire connectors are just as stubborn if not worse. Grabbing a couple bulbs tonight… And looking so forward to spending hours getting them loose and out again and replacing their bulbs. Just one for starters though, going with the one in front of the battery, I recall it was the easier one, but probably not by much. And if that one works, then on to the other.

Honda F22 ??

I been looking for a video that explains this issue I have a 2003 Honda Odyssey lx Ac not blowing cold air only hot air ac clutch is engaging thank u will try this 👍🏼👍🏼😎

I have a 2003 odyssey I replaced the passenger side. Going to try doing this on the driver side my Ac doesn’t blow cold air only hot. I replaced the transistor by the blower motor as well Ac clutch engages so I’m hoping this will help Thank you in advance

Thank you great information

That style of unsupported cylinders are so prone to head gasket leaks if they get hot.

Excelente vídeo! Tks for teaching😅

Thank you so much. You just saved my entire day

Excellent ,, thanks for the help

Thanks for this video! Watched this video 6 years ago for the 2017 eclipse with my dad and I've done this trick 3 times now (for the eclipse in 2017, a partial eclipse in 2023, and getting totality this past monday)... def saved a lot of money taking eclipses with this method so thank you so much :D (plus the colors of the eclipse are very rich and beautiful through the candle soot, idk the reason but it looks really cool!)

*DON'T TRY THIS AT HOME--OR IT'S GONNA BE YOUR LAST TIME SEEING THE LIGHT*

How to go blind.

Make sure you turn off your candle everyone…Lol

Thankkkkksse❤❤❤ gonna try for it tomorrow Apr 8 2024

Great job! I know it’s work . I did it too .

Mei I use the eye glasses