Video

Watch all the episodes because inverted flying is covered across a few of them.

@@auggiecopter ok I will.. I really like the near far rudder trick, it’s so great!! I will keep watching because I need something to help me perceive the inverted orientations

You’re welcome 😊

Do you try and match yaw rates with flip and roll rates in your FBL?

I let it dry a few hours

@@auggiecopter yes thank you. Have let it dry a few hours and its ok now (second set,firts 1 come off)

Mine too 😊

Heli-X. Look for this training technique. It's all explained in that series: czcams.com/play/PLQXNqK8ED-Ckil9fi59Atkr3hW1iinQDm.html

Thank you

Thank you. Loved the Gemini 🥰

Don’t know. Never used a fan in scorpion ESCs. I will find out.

There’s a PDF manual. I have a copy of it.

@@auggiecopter Hi will see if i can find the PDF file thank you for your reply

@@leepering4440 it’s not published yet. Will be out when released.

@@auggiecopter Excellent I just need to look at the manual, as this is going to be my first Heli build. I have always bought second hand Models

Radiomaster has a better pcb 😂

That's a good approach

Did you have to take a slight amount of sandpaper to the road ends?

@@mtb4maine No. I do generally roughen the ends of the carbon fiber rod with a file (sandpaper also works well) whenever I bond the rod to the pushrod ends with JB Weld (or CA glue), but I do not roughen the cf rod ends in this case because there is no bonding; it is purely a mechanical fastening.

With my NME kit those bushing would not fit on the rod at all, I needed to reduce the diameter by a few .001” I guess my question was more if anyone has had the same experience.

@@mtb4maine On my NME kit, fitting the carbon fiber tail rod onto the metal rod ends was a tight fit. I used a hammer to tap it in. It is important to insert the carbon fiber tail rod all the way onto the rod ends until until it bottoms out, otherwise you risk it coming loose. I guess reducing the carbon fiber rod outer diameter with fine grit sandpaper would have worked, but I preferred to lightly tap it in with a hammer.

I’ll try that next time. Thanks!

The carbon rod ends WILL split and deform a bit when using these reusable "push rod ends". This is not an issue whatsoever as far as safety and performance of this assembled unit. It would become an issue if you were for some reason wanting to use the carbon rod itself in another project. In other words, the assembled push rods ends could be unassembled and be used in other projects, but not the carbon rod itself unless you saw off the "damaged" ends.

What John Hamel said is correct. They will split in the ends but because it doesn't allow expansion in the straig portion this split doesn't travel further out

I'm not sponsored by anyone. I'm good friends with all the manufacturers, I like flying and I like to have all kind of different brands so no problem with that here.

@@auggiecopter I know that,that’s why waiting for honest review from you

⁠@@auggiecopteryou are super. I love M7 as well.

an EVO

And "Sky is Calling" is just stupid... nearly as stupid as "Be Original"...🤣

If you go to the product page at XGuardRC.com you will see another video and diagrams explaining how to do it for the Futaba

Thank you so much

If you go to the product page in the XGuardRC.com website you will see a video and diagram on how to do it for Futaba.

Thank you so much

If you look at the video you can see that the way to ptrevent the full switching is by preventing the full swing so that the rocker will rest fully with the piston pushing to keep it in place. If you solder a piece of metal to the contact that’s connected to the wire so that the rocker won’t swing fully you will have restored it but at that point it’s probably easier to just order a replacement.

@@auggiecopter Im trying to find MOM version of regular switch for month already with no luck. I have specific size (in black dji fpv remote) 8x8x5mm

@@vsobolevSelect the style you need here: www.aliexpress.us/item/2255800326081342.html This type: ae01.alicdn.com/kf/H59753a13da15413285079f046b3ca1e10/SH-T80-T-Series-Flat-Handle-6-35mm-Panel-Mount-Mini-Toggle-Switch-For-RC-Model.jpg_640x640.jpg_.webp

@@auggiecopter These ones are slightly bigger (13x8) than i needed but ive ordered them few days ago in hope to swap metal parts inside of old ones

@@vsobolev there are smaller Ones in that link

Yes it works with Quest 2 and HTC Vive, hp reverb and pretty much any capable VR goggles.

Man, I've been wanting a VR headset for a LOOOONG time!😮

Yes they are adjustable to very small diameters

Yes absolutely

That’s not related to the rpm sensor. If your ikon can see the rpm it means the sensor is working correctly. Now you will need to connnect it to the futaba receiver to be able to send the telemetry to your futaba transmitter.

@@auggiecopter Thanks for the reply.

You’re welcome ☺️