Video

I can't believe what I'm watching here😂

would you recommend to drill it in internally, or do it from the outside?

would you recommend to drill it in internally, or do it from the outside?

Hi ,if I understand correctly this kit is used internally after removal of skirting and old plaster . I would be interested to hear what others think. Thanks

You don’t know much do you?.

Please tell us if this worked.

Any update? Did it cure the damp then?

waste of time this, sorry to say but these treatments are sales man’s wet dream. You should already have a damp course on your cavity wall house. may be it’s below the concrete path and it’s being bridged, never butt concrete up to the house. High ground level, bad gutters, blocker backing up drains and leaking underground water supplies are the things to look for. Prevention is better than cure. Cavity could also be full of crap, so a few bricks out and clear the cavity.

Hi mate Thanks for sharing video. Can you please tell me if it sorted out the rising damp. I have a similar problem and wonder if this is a good solution. Cheers

Chemical damp industry is a con! And this achieves nothing

You just add the alcohol to container 91% for best results.

Hi I've watched this video very educational thanks, i can't find the other one showing the job once completed the one you said you was going to do next.

Used these , three months on, the rods look just the same, the mortar in my wall is still reading 33% on my meter, ( and this is in the summer months ) which is the maximum it will go to. I think I have been conned, big time. Thank god I only did a 10 foot interior wall, as a test before doing the whole house.

Great job. Admire your patients!

My dear friend, the alcohol must be poured directly into the container of the drawer and it does not need a separate burner, as you tried.

You dont use them with a trangia. you put ethanol or alcohol blocks in the bowl reservior and control the flame with the sliding lever. They are used in restarents, bars, cafes, hotels all over the world. And are rightly considered the best stoves out there now the Origos boat/tent/ice fishing heaters are dead with a heater attachment. With a stainless steel gas camping cooker heat exchanger add on you can use them as a safe hot tent or van heater as they give off CO2 rather than CO. As these are now about £8 to £15 on Ali and are going for up to a mad £40+ on some UK catering sites you have a bargain.

Properly shite 😂

Hi Sir, I need to course damp proofing

Fantastic. Thanks for sharing. What’s your thoughts on the gun sikamur injectacream 100?

SOUND MATE THANK YOU 👍

I used a vacuum nozzle to suck the dust out.

Hi did it work ? Thanks for sharing

Thanks for sharing this video. I'm looking at getting this done soon as the main living room on the ground has notieable 'Rising Damp'.

What’s the cleaning tool called thanks

I have the stove and the liter bottle. Nice items.. nice video

I was told if the battery is flashing the volts are wrong. 12 or 24. Not sure how to get into settings. Ill see if i can find out

Thanks for video I'm planning to do soon much appreciated with instruction not sure if I still need to take plaster off from inside to do the same or will be enough to do it from out side how was the affect did this product did well ?? thanks you so much

Great vid

Try 1234

Dust looks fairly dry tbh.

If your running a longer distance then before, you may be suffering from voltage drop.

Locked out too, im almost positive it happend when i messed with the settings.

ext ground level is to high

Hello Buddy it looks like you have a Bridged Cavity possibly caused by the bricking up of a door opening so the right hand side of that is very damp?

this man could make sex with the most beautiful woman in the world look boring.....

I'd maybe look for other sources damp, ie condensation. Raised external ground levels. Blocked drains/broken drains. Inadequate rainwater disposal. Blocked or missing sub floor air vents. Modern plastic paints. Cement renders. Gypsum plastic. ..... to name a few

Oh yeah. Your house is gonna be dry as a bone now! 🤣🤣🤣🤣🤣

I block menu too :-(

Hi all I plan on doing a follow up video next month (time off at work lol) on how it has worked, I will be showing why I did it this way and what some comments have been like good and bad. And what if any my plans are next. THIS IS NOT A HOW TO, OR SPONSORED VIDEO, AS MOST OF YOU CAN TELL IT'S AN AMATEUR VIDEO ( SOME CAN'T TRUST ME LOL) Sorry for shouting but some need to get it through to their brains, that I am trying to stop damp in my house and I have never done anything like this before. Thanks for reading my bit of a rant see you in December.

Is this recommended if I have issue in box room upstairs. Also hiw do I gauge where to drill if my outside walls are rendered a d cannot see mortar lines

Good useful 'how to' on these rods. Im a bit worried for you though, you are puffung like a trooper through the video? 😕

I was thinking of having a go with this myself as i had loads of damp walls in my bungalow, however as it needed treated from the inside, there was loads of plastering etc so i got a company in to do it. I had a few good convos with the guys doing it, one thing they did tell me....if the damp on your walls inside the home is above 1 meter, then chances are its not rising damp, as the weight of the water rising against gravity does not travel higher than 1 meter. I had 8 internal walls treated, that was the plaster taken off to 1 meter, the injection damp proof, and then a membrane along the wall followed by new boards and plaster. They also told me that the injection / rods were only around 30% effective in their experience, and really its the membrane on the walls that stops anything coming back through. Not that I have a clue about damp, just thought i'd relay the information in case it can help someone. Anyway, great video mate, very helpful to anyone thinking of having a go.

Ehup! Whats it like a year on, has the damp been cured?

What a load of crap, look for the problem not the con artist that sells damp products.

These things really achieve nothing Damp proofing is never needed it’s generally very simple causes!

Any updates on its efficiency after a year?

😄 𝐩𝓻Ỗ𝓂Ø𝓈Ｍ

Can u send me your contact mo no pls

Similar to the X stand you have is the Toaks 6 plate version. File V notches in the top of the burner holder to register the X pieces more positively. There is a good vidio on CZcams showing a conversion to make the Mini (28) into the same format as the 27 & 25, which I shall attempt later. Thanks for sharing Take care

Hey, thinking of doing this myself, how has it held up over the winter months? Noticed any improvement?