Video

Awesome bucks.. to bad everyone with youtube that lives within 300 miles will now enjoy this great public land hunts.. saw it happen to ducks,turkey even squirrel... good luck

Lmfao I get 100 punders all day on the Mississippi River lol

Instead of a safety pin, I use a pilot broach.

👋 I was wondering if you have ever fished Moss Island. You have a great pond!

I have learned so much from you I thank you for the information, I will be wacthing all your videos. I have fishedfor years but didnt know as much as I thought.

I just won't use bait for trout. I only use jigs and shad raps. I know it works better sometimes, but it just isn't nearly as much fun.

You really need to take this CZcams down It is so dead wrong and harmful and will ruin people's aquatic life in their ponds if they listen to your uninformed incorrect and reckless information

You said the trees are dumping stuff in it and it looks like a swamp... keep putting that copper sulfate in there and you will kill not only all the aquatic life but all the trees and vegetation around your pond... Then you won't have to worry about leaves falling in your pond

This is why people make fun of people in the south.... This right here...

It looks like you are using a Nymph that is generally used for Trout. But I can see that Nymphs would work for Bluegill too.

What about the aquatic life? copper sulfate is so toxic to them...

Which pond 3 and 4 was located?

Does an enzyme work for this? what about charcoal filtering the water ?

Ik exactly where this spot is… been a bunch of pressure there since these videos started showing up from down there you killed a nice one a couple yrs ago I had on camera good hunting just keep it a secret🤣

You really should measure and use the proper amount....😁

Do you use beneficial bacteria or barley in your pond?

Definitely need to run aeration if killing off lots of vegetation at same time

Bluegill bite so much shit 💩 😂.

Good information to share with us. We fish a river here in N. FL. and we could not get any big pan fish bites towards the end of our trip. we found an outer bank and started fishing the bottom, and the bite started to pick up, but my grandson and I both forgot some snacks and had to pull out, lol. We are learning this system, and with your help has giving us a better perspective of how to look for them. Keep it up, God bless.

that the bridge into brandywine?

Love catching those bluegills and red ears. And sooo tasty.

That's a pretty place to fish Midsouth ☺️🎣🐟🎣

I can’t believe you threw those back

Where ye at?

Since BH209 is now selling at North of $120 per pound, I came up with some Low-Pressure Smokeless loads for my factory muzzleloaders. "Low Pressure 50 Caliber Smokeless Loads in a 209 Factory Muzzleloader", 2 DVD set | eBay These 2 DVDs contain a demonstration of using Low Pressure Smokeless Loads in a 50 caliber factory muzzleloader. Savage Arms proved over 20 years ago that a factory muzzleloader can use smokeless powder. A retired Science Teacher/Gunsmith/Inventor used a strain gauge glued to a rifle barrel and the Pressure Trace II computer interface to compare the pressures produced by Blackhorn209 propellant to pressures which can be produced by ten different smokeless powders. These ten smokeless powders do not contain the corrosive oxidizers which can rust a rifle barrel. The loads developed produced a pressure equal to or less than that of 84 grains by weight of Blackhorn209, which a common Black Powder substitute made up of 83% smokeless powder (nitrocellulose). However, Blackhorn209 does contain corrosive chemicals. These loads were then fired in a factory inline muzzleloader with a shank diameter of about one inch. These DVDs are sold for entertainment purposes only. The producer cannot guarantee these loads will work safely in all factory 209 muzzleloaders.

Ian gone lie dude you be doing too much with this CZcams shit spot I hunt same spot where my camera was stolen and same deer you shot that I had on my camera doing lil too much man seen over 70 different trucks on that state last year gotta quit posting all these videos you screwing a bunch of low pressured spots

It's impossible to start when the engine is warm?

Don’t release carp!!

Thank you very much. I've watched this video twice back to back and will likely watch it again. :)

Great video and love your content. At the beginning of the video you said that you were targeting summertime bluegill NOT on beds, but all you fished were beds. Can you please do a video on how to locate them but not on the beds? In open water, on structure, or around boat docks.

If that is Glenn Springs,I know another sandy spot,that my dad and I used to catch bluegill and shell crackers from,all summer long.Havent tried it in 22 years,but,I feel like they would still be there…. Last time I got to fish with him 😢😢😢

Where is this hunt?

I've been fishing that lake for 26 years. You are absolutely right about those beds and I recognize every one in your video. Tons of small fish like you said but 2 weeks ago I caught a 10" hybrid. The lake has gone downhill from years past. The grass has ruined a lot of access to the beds and everyone has figured out the ones that are accessible. That's why I never fish on the weekend. I tie my own jigs (1/32 and 1/64 oz) and do well tipping them with wax worms. I usually give a dozen away to local fishermen with their kids most trips. If I see you out there, I will give you some to try out or pass on to some kids. I've told a lot of people to look for the Mamosa trees. Other than that point with the gravel about 90% of the beds are within 50 feet of a Mamosa tree. Maybe we should start calling them Mamosa bream.

I’m first can I get a pin

4HP? Copy of the Honda GXV50. 2.1 HP motor. If you want an owners manual in English, get he Honda GXV50 manual. They are the same.

Congratulations! Looked to be a great spot. You really happy with that Primos blaze vest? Been thinking about getting one.

Beautiful pond! I ve been cutting watershield weeds in my pond! Been at it for about a month! Hard labor I tell you! I put blue dye, and I need to use a herbicide for treating the watershield weed. They say those chemicals are safe, but I am afraid to kill the fish!

It has a centrifugal clutch. That's why it has to get some rpm going before the blade spins.

That socket is he spark plug wrench.

Eagle lake? My new game, guess your fishing hole!😂

Alright, where in the mid south did ya catch this one? Closest I’ve found to Shelby county was whiteville lake

🫡 great video!! You are mistaking a male channel for “blue cats” also. You ever eat one of those soft shell turtles you’ll never throw one back😅

What caliber rifle are you shooting?

Filling up the freezer!

Looks like good ole Glenn Springs!

You make it look so easy! Awesome video bro!

Brandywine Chute

Great video I have been using Carbon lites for a few years now. Love em

Great video That is nothing but fun

Hay that's sharp looking and kick ass tho.