Video

I want to know why can’t they stay with USB C. Why go C to C charger? Doing too much. 🤨

Good video does it have pass through charging.. Like if I use solor to charge it can I also charge my phone..

Can I use my xiamoi 65w fast charger and wire ? Is it safe for the phone ?

what has been your fastest run yet and what gearing? do you reccomend an o-ring chain in 428 or non o-ring chain?

so are you using the factory 125 wiring and just swapping out the green to black? or did you use the wiring supplied with the engine?

what was your 125 gearing? i have the xpro 125 street legal enduro that i plan on installing the zs190 on it by xmas if not sooner.my 125 has a 13 frt and 41 rear.and according to the speedometer best i could get oyt of it was 52mph at 9000 rpm,1000 short of redline; am fixing to install at 17t frt and 35t rear to get me by til i get the 190,is their room in the case for a 18 or 19t frt on the 190?

Great demo! I have this same trimmer and it does a great job. It is a BEAST as far as weight though.

When you use a 45W charger and use the charger at least twice a day, your charge is less stressed because you only use 70% of the charger's power.Therefore, if you use a 25-watt charger, after a year, your charger will be exposed to damage and danger because it has been working at full capacity all this time.Note that sometimes it is necessary to pay a little more money to avoid paying the full cost again.😊

i already have 25w samsung so no need to purchase 45w for double price of 25w ahh Thanks

I bought the whole kit. ALL OF IT. They all kick ass

YES! TANHK YOU

I know this was a while ago, but do you remember what telescope you used? You seem to be getting about 60 power and it looks good despite being a 'cheap' scope.

I got a anker cord..supports super fast 2.0...45 mins? Like 95%

i know its an old post, but to the newbie out there doing this to a grom clone, yes a steering stabilizer will keep you from getting into trouble if you encounter a front end wobble, but its just something there to help you when it happens , it doesnt prevent the wobble. to prevent the wobble, you must get the wheels balanced, as they are either poorly balanced from the factory, or not balanced at all. these bikes come stock with , depending on elevation and tuning, 6-8 crank hp. they are not sold , with the intention of the rider taking it out of the crate , and exceeding 50 mph. so get the wheels balanced, for the speeds you intend to run. i would say have them balanced to 80 mph at least, or 85 so you have some room. next you check the steering stem bearings. my vader came loose, and i could sit on it and forcibly wiggle the front end with little effort and could watch it move. dont over tighten the bearings , but make sure there is no slop. also the front forks come with a fork oil tht may as well be vegetable oil its so thin, youll want to either have some good 20 weight oil put in the forks, or get a nice aftermarket set of adjustable forks, but still make sure they have at least a 10-20 weight fork oil in them . also the motors are held in by 2 bolts, and they dont fit tight , and allow the motor to move around a little, which introduces even more slop. if you do a zs conversion, you need to drill the motor mount holes to 10mm , or some say 3/8 inch, and get some good grade 8 bolts to replace the stock ones, lock tight them in, and the bike will feel much more solid. do your research on this stuff. a steering damper will not solve the issue, it just helps out if the issue comes up. solve the issue, but still get the stabilizer if you want some peace of mind if you plan on going 75+.

I just bought the Milwaukee M18 Saw Pole with the Hedge Trimmer today for around $590 with Tax....Looks like a great tool,,,,Will have to try it soon...........

link to the screen protector you got on s24 ultra please

Hi, any mods to add 4 headlights Or should I just add them in parallel ?

they should make a pruning attachment for thick branches i think it would be a complete system as there are always thick brnches up high in my experience and extension that would cut it would be great as you don't have to break up a ladder and a branch loper to do the job......

Thank you so much. I finally learned how to connect the hedge attachment to the motor. I also learned how to swivel it. Still need to work on the angle that will work best for me.

What size are the original screws that hold the OEM license plate/furnace signal? I misplaced mine

Some test footage woulda been nice :/

Looks like it covers the internal mic?

What are the inner dimensions ?

Did they rub at all?

Slower the better. Charge it at night with a slow charger and your battery will last forever.

I bought one also when I finally lost compression on a Troy Built 4 cyl cultivator. I get tired of working on gas engines and thought I'd try an electric 13.5 amp cultivator. First of all, it does not work as well as the Troy Built. It is much lighter and doesn't dig in as well. I'd say I work maybe 2-3 times harder breaking new ground with it than before. These are cultivators not tillers. To till a yard that big or a large or multiple gardens, the other poster is correct, it take a rear tined tiller. I'm in my 70's and pulling this through dirt eventually wears me out as the strength in my hand and fingers finally gives out trying to hang on and pull. I've always had a very strong grip, but you lose some of that with age. I don't care for front tined tillers either. I remember two that I used many years ago that also beat you up. But they do work more efficiently than these cultivators. These electrics are cultivators, meaning that you use them after the garden is in and all the ground has been turned already and you go over it to keep the weeds down by uprooting them between the plants or rows. Maybe someone young and energetic and persistent can use one of these and turn a whole yard, but here in Central Illinois the dirt is more compacted and many of the weeds and grasses have massive, spreading roots and runners. You really need to go deeper than these electrics can reach. But, once you do get your garden all tilled, next year will be easier. I miss my Troy Built 4 cycle gas and I thought it worked better than a Mantis I rented once. If you want to get the job done quickly and easily, get a rear tinned tiller and a smaller cultivator to go with it.

Sooo glad you made tbis video! I bought this tiller several years ago & it's still in the box because I was intimidated to use it! I'm now to going to attempt to do the same to my yard as you did in the video. Thanks!!!

Hey man thanks for the video. One thing. Which setting on the lense is for the ND filter and which is for the PL? I have the same product, but there are no instructions. Does lining up the two dots stand for ND? If so, where is the setting for the PL function of the lense?

Hey, I'm living in Canada. With your setup experience, do you recommend getting this acasom setup or something else?

The reason why Samsung uses 45 watt chargers for their top devices is because if your phone battery dies and you put it in the charger, it will quickly return to 30%, if you are a bit technical you can It is also very clear that if you charge the battery from 0 to 100% at 45 watts, the battery lifespan will deteriorate very quickly, Samsung is a brand of quality and you also pay for that, so the 45 watts is partly exaggerated and waste of money. But most people also charge their phones at night and the S series is known for the long battery life of the Plus and Ultra series.

Wow! thanks bro for sharing this video. I'm literally observing and writing the results for the chargers I bought for the s24 Ultra. I got the Anker 45w nano2 and the 30w nano3. I also bought a 100w usbc cable to see any difference. So far between the two, it's 10 mins difference, you're right about this.

I’m looking to buy these tires, are you able to measure the ACTUAL diameter of these? I don’t want to buy something too big for my application again! (265/60-18 Duratracs rub on my Tucson.) Mine measure at 30.5 when off the vehicle. Thanks!!

4 years old and still the most detailed video i've found so far & i've lookeeeeeeeddddd. thank you sir

high traffic area. soil is compacted. need to dig deeper down an put in some drainage channels with gravel. enrich soil with peat moss and whatever else. or it's just going to keep compacting over time.

somebody help please!!!!! what's the best extension cord for these tiller????????

used HID 35w, the reflector not come off by any chance?

Would liked to have seen how it works with the w/a lens

Good review. Very helpful. Shoes how it works and what to expect during and after. Good job having your son video tape while doing the tilling.

That looks like my yard now! I hate it! Weeds intertwined with grass but mostly just....WEEDS!!! I've tried weed killer, pulling them, digging them out with a shovel. It's a constant battle! So now I'm going to do what you did in this vid. I'm going to take a tiller to it Does anyone have any suggestions for a good tiller that's under $200?

No just a space station

Will i be okay if i install 10inch props on this drone?

First. Timer here! This video is perfect Perfect. About to do this in a small section of my yard in about 30mins.

when you get them in amazon they tell you to do not use those led bulbs because dont fit

Thank you very much, now I will continue using the Orsen C14, no need to buy a new C12. (I just want to see blue circle once time when charg my phone haha)

Kinda pointless without showing performance. Anything you put in front of the lens will degrade the image, what you need to know is how much it degrades it so you can see if the trade off is worth it.

Is there a setting that makes pocket 3 turn in the correct way? It seems like it would be a simple firmware upgrade

Hi, the durability of this type of hub with ceramic bearings is compromised by cyclists weighing over 100lbs.

I think the company is Sunnylife not Sunnyfire.👍

My ultra charged from zero (powered off) to 80% battery protect) in just 36 minutes, incredibly quick!

Where have you got the 100w charger