- 270
- 5 540 612
Daniel Havrince Atelier
Romania
Registrace 27. 12. 2016
My name is Daniel Havrince and I'm a maker. I show tools in action, I fix different appliances, I love woodworking and CNC.
I have a medium 1060 CNC router, 9060 100w co2 laser cutter/ engraver, wood lathe, a lot of Skil power tools. All of this you would discover if you subscribe and follow this channel.
In my shop i run a small family business and few of the products i make/sell, I make videos/shorts and post them here for you to enjoy.
I really apreciate your feedback, so please don't hesitate to give it when you think I made somethink wrong, it really helps me and others make good and functioning final products.
You can check out my shop here: danielh.ro/magazin-personalizari/
I have a medium 1060 CNC router, 9060 100w co2 laser cutter/ engraver, wood lathe, a lot of Skil power tools. All of this you would discover if you subscribe and follow this channel.
In my shop i run a small family business and few of the products i make/sell, I make videos/shorts and post them here for you to enjoy.
I really apreciate your feedback, so please don't hesitate to give it when you think I made somethink wrong, it really helps me and others make good and functioning final products.
You can check out my shop here: danielh.ro/magazin-personalizari/
Grunman 450w electric trimmer unboxing/test - FIELDMANN FZS 2505
Grunman 450w electric trimmer unboxing/test - FIELDMANN FZS 2505
#grunman #trimmer #FIELDMANN
#grunman #trimmer #FIELDMANN
zhlédnutí: 407
Video
custom gift plaque
zhlédnutí 105Před 23 dny
DeWalt dwe7485 saw blade change tutorial how to
zhlédnutí 87Před měsícem
In this video, I teach you how to change the saw blade on the DeWalt DWE7485 table saw. 1. Safety First: - Make sure the table saw is unplugged to avoid any accidental starts. 2. Remove the Throat Plate: - Locate the screws holding the throat plate in place and remove them. - Lift the throat plate off the saw and set it aside. 3. Raise the Blade: - Use the blade height adjustment wheel to raise...
Making event welcome floral arrangement stand DIY
zhlédnutí 68Před měsícem
Making event welcome floral arrangement stand DIY I this video I make and welcome stand with floral arrangement for an event, in this case wedding. #weddingflorals #floral #eventstory
pizza Slice engraving on wood
zhlédnutí 5KPřed 2 měsíci
Simple drum sander lathe attachment. DIY
zhlédnutí 692Před 2 měsíci
Simple drum sander lathe attachment. #drumsander #shophack #shopjig
stitching pony strength test
zhlédnutí 536Před 2 měsíci
stitching pony jaw strength test. used to lift 5l (1,32086026 gallons) of water. buy on my Etsy store danielhatelierro.etsy.com/listing/1526720593 #leathercraft #stitching #leathertools
Parkside electric chainsaw PKS 1600 B2 unboxing, test and review
zhlédnutí 2,6KPřed 3 měsíci
Parkside electric chainsaw PKS 1600 B2 does it worth the HYPE? #parkside #electricchainsaw #parksidepowertools
Rear wiper arm change on golf 5 variant
zhlédnutí 104Před 3 měsíci
changing the rear wiper arm after it was frozen and broke the mechanism. #carrepair #rearwiper #golf5
Pressure washer 7.5HP 18 Mpa with hose and gun Breckner Germany BK78354 TEST
zhlédnutí 176Před 3 měsíci
Pressure washer 7.5HP 18 Mpa with hose and gun Breckner Germany BK78354 TEST Engine power 7.5 HP Maximum flow 9.2 L/min Working pressure 15 - 17 Mpa Maximum pressure 18 MPa Displacement 212 CC Pump type axial pump Engine type 1 cylinder, 4 strokes, air cooling Engine speed 3400 RPM Ambient temperature 0 - 60 degrees Engine oil capacity 0.6 L Fuel tank capacity 3.6 L Fuel type unleaded gasoline ...
SKIL 3460 CA CORDLESS RECIPROCATING SAW
zhlédnutí 457Před 3 měsíci
SKIL 3460 CA CORDLESS RECIPROCATING SAW #skil #cordless #reciprocatingsaw
Definition of lazy
zhlédnutí 1,7KPřed 3 měsíci
Vivaro Trafic Primastar EGR replacement on 2.0 TDCI M9R engine
zhlédnutí 6KPřed 3 měsíci
Easy way to change the EGR valve on the Vivaro, Trafic, Primastar van, 2.0 tdci m9r engine. I'm no mechanic, i make sometimes easy DIY repairs and i had a small problem with the EGR Valve. Hope this help you saving some money and fixing your van. #egr #vivaro #carrepair
Perfecto me gusta donde se encuentran
Thanks so much❤ This really work🥰 I really appreciate🤲🤍😅
Nice
Ta
I hate videos that skip a step. Like you magically were able to drop the electric control bit under the steering wheel. Yours just drops out, apparently. Shit video skipping steps
اسوء نوع.
Mai aveam putin și îl aruncam pe geam. Multumim pt video🤗
Enjoyed the dog! Didn't enjoy the lack of safety equipment!
salutare, intrebarea mea este daca trebuie transformator de la 220 la 24v, multumesc ptr un raspuns
Alimentarea se face cu 220. Are in panou tot ce trebuie.
Tunis
Annaba Skikda
A wood vice most of us can afford to make. Functional, practical, and low cost.. Brilliant..
It's helpful but next time buy fuse don't bridge it boss
Perfect video. Thanks.
Hi, two quick questions: 1) What software are you using? How is it possible to engrave over stainless still with dark letters? I´ve tried but no success. Best Regards;
Lightburn it's the software. 30 days trial until needs a licence. For stainless steel I used max power and low speed.
Eurgh, Midea microwaves. Mine recently did the same thing, but it seems on some newer/cheaper models they omit the fuse, and on my unit the transformer burned out (I suspect that it is just a thermal fuse that failed, unless they "forgot" to put that in as well, but it seems impossible to dismantle the transformer without destroying it). This rendered the unit uneconomical to repair. As a result I refuse to ever buy this Chinese Midea junk again. To leave out a safety component is utterly unacceptable.
Thanks 🙏
Thanks saved me buying a new one
Zaaggeleider en inlegplaat zijn waardeloos!! Anders top machine 😅 heb deze ondertussen 2 jaar (regelmatig gebruik 3a4 x / week )nog zeer goed werkend)
Can you please explain how u removed the 2 impossible screws from the top, Did u beat them loose ? Or did u make a cut in the centre to fit a flat screwdriver ? I am now at that point and dont know how to proceed.
Using a flat screwdriver and a hammer I gently beat on them until it made a small gap and was able to turn them, after that I used normal hex screws
@@DanielH thank you , it worked 👍
Avez-vous vérifié l'état de la pile ? Car l'affichage semblait faible, sinon défectueux...
Thank You For The Tips . . . !
thanks brother my microwave also working again
This video saved my girlfriends microwave today she wanted to buy a new one. Thanks man
Salutare! La modelul asta ma tot uit de 2 zile. Vreau sa îmi iau și eu unul. Întâmplător am dat de video ul tău. Foarte bun!
salut, recent am achizitionat un model asemanator , dar am intampinat probleme cu taierea la 45 de grade , ea nefiind exacta si avand o abatere de 3 grade chiar, plus ca am intampinat niste vibratii destul de mari la taiere atat in lemn curat cat si in metal moale . Ce parere ai?
Vibrațiile sunt și la mine, in special când forțez să taie mai repede. Cat despre unghiuri, are ceva reglaj pe acolo și poți ajusta
Hi, Is your demo using the "Brushless" model? Would the "brushed" model work as good?
I think I have the classic version
where did you buy the new ignition barrel from? does it work with the old keys?
Why the heck do remove the steering wheel, what’s wrong with you
You do it better my friend. I'm curious how you can do it.
@@DanielHyou can clearly see in the video there is no need, you have enough space for every screw. Show me one point/one screw which made you uninstall the steering wheel, just one ☝🏻
Vise blocking door.
Stil not working.
👋 Does it is enough for 0.05 he garden land?
I only use it to finish edges and corners where the big one can't reach. It drains the battery fast and it's slow to used it on big spaces
@@DanielH thanks 👍
Hi Daniel. Could you tell me the brand of this machine?
No brand on it, only the ruida controller is branded, the rest are no name components from China.
How do I get the actual dimensions for this playhouse I would love to build it for my Granddaughters.
I can measure it for you but it's quite a waste of material because it's too big.
@@DanielH the size is no problem Daniel.
If you could give me a rough guide I would be much appreciated.
What is the name of the device?
CO2 laser cutter/engraver. There are lot of brands, prices and options available on the market.
@@DanielH How do I get this device?
Search a local company that imports CO2 lasers or try your luck on AliExpress, Alibaba but it's a lottery, you may get a good machine or something bad for the price of good one. I bought it from a local dealer, they came and install, they teach me basics and I call them anytime for spare parts.
Was außer die Pistole braucht man denn noch genau? Kompressor…Sandstrahlmittel…was noch?
Maybe a closed box where to sandblast and to collect the used sand.
Your safety is a bit suspect, however I wanted to say thanks for the video. Having just purchased one of these it looks good value but I may need to change the sprocket to a 1/4" for carving purposes, as my battery Stihl takes time to charge. Being left handed is an issue as this is not reversible but I should be able to manage it successfully .
I didn't had any other wood available to cut, so I used what I had and it was hard to keep it secure. But the tool is good, Worth the money. I have gas powered but it's too loud, this one si best to work around the house
Cum ai scos alea 2 suruburi? Nu reusesc nicicum
Bătut cu o mica daltă până și-a făcut loc, și cu șurubelnița plată. Bătăi mici și ușoare, durează ceva
Ți se face foame privind
Thanks for this great video. It's amazing that a video of 7+ years came to my rescue today.
Glad to help
I have same model, but buttons stopt working.Have to push several times to start.How to fix?
Va salut...buna inventia cu acele cleme de prindere pe stilp pentru probe.sa nu gresim cu datul gaurilor si apoi constati ca nu se deschide/inchide la max. clema de stilp tine asa bine sa nu se miste suportul motor? ce model este???Multumesc.spor la treaba.
Sunt menghine de strângere de la wolfcraft, se găsesc în Dedeman dar destul de scumpe. Pentru montat motoarele la porți eu zic că nu merită, sunt și variante mai ieftine care fac aceeași treabă.
@@DanielH Va multumesc...sanatate.
Va salut! Se poate repara magnetronul? Iese fum din el când pornesc cuptorul
Cred că doar schimbat cu totul
Buna ziua daca nu va suparati e de vinzare ? Si cit costa si de unde sinteti ?
Nu am de vânzare. Doar am prezentat unealta. Încercați pe grupul Parkside Romania pe Facebook, poate are acolo cineva.
Would anyone recommend this table saw
If you have budget I can recommend to go near DeWalt or Bosch table saw. The Parkside is good but I feel the safety is a big issue, the motor is held only in 1 point, wobble a lot when cutting. Maybe mine was faulty, I don't know
Unde se monteaza fotocelulele față de porți?
In afara porților, altfel când sunt deschise porțile o sa dea in raza lor.
How to open rivets 00:55 , kindly help. Which tool to use?
Thanks for the video, do you think it would be possible to engrave say (obviously without the fuel inside) zippo lighters with this? Would be great to make small batches for my business as merch
I'd say it's possible but without a test first I cannot say 100% to do it
Cam slab moare în șpan😢
Are doar 240w. E bun de ascuțit cuțite. Eu șlefuiesc niste cutii mici din lemn, mi ideal. La cat a costat și cât am tras pe el și-a scos banii de zeci de ori și încă mai duce.
@@DanielH Da, fiecare cu funcționalitățile sale și cu ce are de făcut 👍 multă baftă
Fain
Bagă niste video nou