- 12
- 122 089
ebrazil67
Registrace 23. 06. 2007
2003-2007 Ford F350 6.0 Powerstroke - An Easier Way to Work on Passenger Side GP and/or Harness
6.0 Powerstroke got hydrolocked because of, what I suspect to be, a bad injector seal or and injector failure. I was terrified to work on the truck myself. But, after some research and assessing my issue, as well as the truck's design, I found that it is easier to work on than I thought.
This video details the wiring harness and glow plugs, so that I could release the engine hydrolock. This video details that removal process, with a concentration on the passenger side. The driver side was pretty easy to get to, but the passenger side, at first glance can appear challenging. If you follow the steps and my advice, it really is an easy truck to work on.
Stay tuned because next, I will detail the GP, injectors and wire harness install when parts arrive.
As always, be safe. Peace
This video details the wiring harness and glow plugs, so that I could release the engine hydrolock. This video details that removal process, with a concentration on the passenger side. The driver side was pretty easy to get to, but the passenger side, at first glance can appear challenging. If you follow the steps and my advice, it really is an easy truck to work on.
Stay tuned because next, I will detail the GP, injectors and wire harness install when parts arrive.
As always, be safe. Peace
zhlédnutí: 290
Video
How To Solder Copper Plumbing - The Right Way
zhlédnutí 72Před 7 lety
If you have a leak in your copper plumbing connections, this video helps you diagnosis why there is a leak at the connection and how to properly correct the issue causing the leak.
Home Build - Progress 3 - Grading and Landscape Leveling Crew
zhlédnutí 37Před 7 lety
Home Build - Progress 3 - Grading and Landscape Leveling Crew
Home Build - Progress 2 - Grading and Landscape Leveling
zhlédnutí 36Před 7 lety
Home Build - Progress 2 - Grading and Landscape Leveling
Home Build - Progress 6 - Tour of Inside
zhlédnutí 33Před 7 lety
A walking tour of the inside of our home construction
How To Frame an Interior Stud Wall
zhlédnutí 352Před 8 lety
I'm not a contractor, but I am building a house and wanted to do a video or a series of videos of the home construction. This has taken several years to do because I'm doing is my self and finally, I'm framing the inside walls. So, during the summer, I pulled out the video camera and videoed the basics of a wall construction. I had my two teenage nephews assist while I video. Actually, they bui...
How To Repair Quick Lock Blade Clamp on Milwaukee Sawzall
zhlédnutí 119KPřed 9 lety
I decided to make a video of repairs I made to some hand tools I had in my shed. Although my repair was of a Milwaukee 75th year model, this video can be used as inspiration for repairing tools rather than tossing them.
How To Shorten an Aluminum Awning Window
zhlédnutí 2KPřed 9 lety
This is a how-to video I made that may help someone extend their construction budget. I had a unique problem, the ruff opening were shorter than the windows, but I didn't want to spend the $200 per window. I search the web and could not find advice or information to help resolve my issue. So the idea came to me to modify the window to fit the opening. I figured I had nothing to loose but a lot ...
I know this video is 9yrs old but I just want to thank you for posting it. Had a stuck blade- took apart but had trouble getting back together. Mine is a little different but I got it, thanks to your help!
Why at the end of your video do you skip the part where it shows how to put the last piece back on I don't understand you didn't even show us how to do that but you showed us all the way up to that point
Where can we get these parts? Thanks for a very well done video
Thanks so much. Didn't know what to do.
You explain it well but you need a camera holder. Some out of focus and some you dropped camera below line of sight, but great job explaining.
Very good job explaining. Thanks 😊
Thank you Michael. I appreciate your comment. Peace.
Thank you for the video!
Great job thanks for the video it helped. Jimmy in N o-Cali
Fantastic. Thank you for the great video.
Sir, Thank you so much for making a clear concise repair video!! I watched several others trying to understand the repair, and YOURS WAS THE ONLY ONE THAT GOT TO THE POINT.
Thanks so much for taking the time to watch. I'm glad I could help.
Bet a lot of problems are dirt
Got an old sawzall from a friend as a gift and the blade lock was rusted in place, fixed it with the aid of your video. Much appreciated.
Man you saved me some cash brother..thanks
Man, thank you. In this economy, it always feel good to save where you can. Thanks for viewing. Peace, E.
Thanks man! Nice work and saved me $
Gary, appreciate you watch and posting a comment. God bless
thanks i fixed
Very well done video! Thanks.
Thanks for sharing, I just repaired my saw because of this video
Man you saved my day!!! I have this exact same model and the pin would not engage. I took it apart with your help and now it's fixed!!
Amen Sir ! Your video helped me out on a job site. Where I had two blades broke off inside the clamp. Was able to re-use the existing clamp, Milwaukee electrical Saw - Zal got back in 2005. Keep up the knowledge from you to others. As I received from you in this video. Saw - Zal ON !!!
Thank you for doing this video. Been having problems with mine holding the blade... like the pin wont pop back out. Use oil from time to time to get it moving, figured it was rusty (used primarily in plumbing....). Think I'll take it apart now that I know how and clean it up. I wonder, what really fails on this, what should I be checking for wear vs just wire brushing clean?
I wish you were my neighbor, you've got great energy.
Thank you brother! Very helpful video!
Nicely presented! Thank you for a great presentation showing and explaining potential pitfalls!
You need to get yourself a camera man (or woman) so you can do the work! :) Thanks for the excellent video, it was great to see how you did that. My repair kit arrived in the mail today and I will be doing the repair tonight.
Thanks O Grady. Yea, you right. At the time I didn't have one but I have one now. Thanks for the comment and support. Be safe.
Hope your repair was successful. You are right about the camera. Will do better in the future.
@@ebrazil67 Thanks, the repair was a piece of cake thanks to your video. The only issue, non-issue really, was my pin was on the opposite side, so I just spun everything around 180° and it worked perfectly. And my comment was not intended as a criticism, it was entirely a joke. I too have tried to film things I do while holding my camera/phone at the same time, and it's a pain in the butt. You did a great job and showed everything important.
Thank you sir. I was going to just buy a new sawzall, but your video helped me decide to fix it instead.
I am glad that I was able to help save a tool and you some money. Peace.
Glad to help you save a tool and some money. Peace.
nice video this is what i needed.
This video has helped me twice when a blade broke off in the chuck. Thanks so much!
I have that problem
Have A m12 at first I thought it wasn’t the same but it actually has the same concept and I was able to remove the retaining ring Thanks so much before this my m12s were disposable tools
This is great and helpful. Thank you!
Just fixed my buddy's with these instructions. Thx man.
Forest, thanks. I am happy this video has helped so many. Peace and you and your family stay safe. B blessed.
Thank you!
dont make any more videos
Thanks for your comment. As always, with social media and the like, you have to ability to stop looking. Impress us all and you do something positive.
Where do I get the part?
Where I can get the replacement parts I have the same saw
Try eReplacementParts.com
Perfect! Just what I needed. I just fixed our Sawzall. Thank you!
You're very sufficient. I like! Very helpful! I wish you did the other Milwaukee cause that's the one I have but it was a very official video! 2 thumbs up
It's the same blade holder.
Iman you talk to much
One of the good things about youtube and the internet in general is that if you don't like the page you are on, you can change it and in the process keep your negative comments to yourself. Changing the channel is simple. But maybe you don't know how to do that. Peace.
Thank you I used this video to replace my defective parts.
Great. Good for you saving a valuble tool and some money.
Actually I bought this at a pawn shop it was on the " as is table " for $15.00 took it home and the blade was droopy so spent another $12.99 for the kit. took the rest of it apart and cleaned the electrical section out and put some new grease in the gear section. Works great!
Thanks for the great video. All the more impressive with you doing all that one handed!
I thank you. I'm flattered that this video helped sc o many. Thanks for being moved enough to comment. B-blessed.
Thanks. I have a few other projects that I'm working on. Keep you and others posted. And as always, B-blessed.
I need to see what your house looks like today. I need an update!
How to fix finally starts at 3:16
1:30 BRO! Get on with it!
Thank you for this video. I was having this problem as well.
Nice video! Very helpful.
Chuck Quinn thanks for your comment. I will be posting new videos soon.
Sir you're my hero, thank you so much. I hope the like & sub helps!
Hey Jeremy, thanks for your reply. Haven't posted recently because trying to finish a house I'm building. But I wanted to say thanks. Peace.
Interesting use for a sawzall haha czcams.com/video/t0JLjLvEurA/video.html
Tiffany Cervenka thanks m
Thank you. This helped. Clear and concise!
Thanks, I can be vociferous sometimes. Thanks for watching.
Thank you Sir! I just bought a foam blade converter for my Milwaukee Sawzall and had no idea how to get it apart so that I could put the adapter on. Very helpful!
Good video and well spoken! Thank you!
A blade was stuck in my Hackzall, so I used the same blade for as long as I could until the teeth were almost gone. This video finally showed me how to remove the first part to begin disassembly. Thank you!