Video

@@Boogie_the_cat I'm glad the video was useful for you.. i always feel i talk to much during the video's, but the info can be extremely helpful.. looking back on this type of footage, i think an above camera angle would have been much better.. i appreciate you taking the time to watch and comment... 🙏 Are you going to use the kraton hubs and stubs to correct the rear offset?

Unfortunately, no.. that raminator was converted to electric, and he sold the engine.. so the project was halted.. i still have the casting's, but no engine to mock them to... There were also significant differences in the engine mounts, so those would need to be fabricated as well.. unfortunately this video was as far as it ever went.. sorry to disappoint.. 🙏

The engine is a simple cag 49.. I would Look all over the place for a cag 49 head gasket at your desired thickness.. there are far more options if you word it that way.. these were and are commonly used in pocket bike's..

I built it from scratch, it's a sieg x2 mini mill that I converted to CNC.. harbor freight and grizzly have the same mini mills.. This was before any decent machines hit the market that were full CNC.. there are plenty of machines out there now for around the 2k mark that are decent .👍

No sir, I try to lean away from motor fans if at all possible in a basher.. it just makes more broken fans to replace.. they take an absolute beating when coming down from the big jumps.. You can definitely cool the motor, but you should use a larger fan.. either 30mm or 40mm.. if you are going to do it you may as well get the most you can out of it.. 👍

Thank you, much appreciated..

Hey Chad, definitely appreciate you checking my stuff out, and nice chatting with you today.. 🙏

Like wise bro n thanks for making the great content! 😊

Yes, all tail pan and front air dam files are over on cgtrader.com.. 👍

@@camaroboy383 I found the file. Just bought this Felony..first thing I noticed was the "unfinished" back end.. seems odd they didn't clean it up better. Looked at a few files, your's looks more realistic. Good job!!

@@timothyallen6207 Thank you, appreciate that, and I appreciate the support as well.. 🙏

Thank you.. much appreciated.. 👍

Lack of rear diff fluid viscosity is the reason for the throttle blips... Without the blips it hooks up on the loaded tire and breaks loose on the unloaded tire.. 👍

The driver tips in the video are mip, pricey, but well worth it.. they are machine ground so they are perfect in size.. they will be the last ones you ever buy if you don't physically snap them.. worth the loot for sure.. I'm not familiar with the Traxxas one's, so can't say how they are.. Appreciate you stopping in to check out the video..👍

@@camaroboy383 thanks man!! I don’t mind investing the cabbage as long as it’s high quality. Keep having fun!

Appreciate you stopping in to check it out.. do you have access to a 3d printer? I have not sold these in a very long time.. I stopped production to gear up for vacuum forming the parts.. life proceeded to get in the way of the project reaching its end goal unfortunately..

@@camaroboy383 I don’t have a 3d printer. I checked out your video and was floored by how cool that rear end piece is. Obviously I’m years behind. That’s a bummer. I 100% would have ordered one. I just got my Felony a couple months ago. Thanks for your response. I’m always a day late.😂

@@jonnyrc339 gotcha, the reason I asked if you had a printer is because the files are still available over on cgtrader.com The main reason is stopped production to vacuum form them was to increase durability.. 3d printed stuff is great, but being rigid plastic it can and will break in a crash.. not a big problem for those with printers that can just print another.. Vac formed polycarbonate was definitely the answer, i just couldn't make it happen with life getting in the way..

I very much appreciate you buddy...🙏.. I hope to be able to come back to it as well.. 👍

They sound crazy when they hit the ground..😱.. but one heck of a good time..😎

😂😂😂.. yeah they are a blast! But I love me some crawling as well..😎Thanks for stopping by and checking it out.. ✌️

Thanks for checking out the video and stopping in to leave a comment..👍 The supplied voltage to the printer has no affect on which ssr to use .. the determining factor is the output of the power supply, which In these cases they are DC to DC... so the one you found will work..

@@camaroboy383 yay! I was hoping for this. I really miss playing in the 3d printed reality.

Chuck! How the hell are ya buddy?.. hope all is well with you and family...🙏 Man, I've been away from the CZcams thing for a while now.. so much going on with life.. been restoring my father's truck as a surprise for him, been at it for 5 months now , frame up resto type deal.. Hope to upload a video of all the pics and the unveiling.. been alot of work man..

I am not.. my design was stolen and now they are being manufactured in china far cheaper... Keep in mind, the material, and finish is much worse than mine were.. They can still be found on ebay, even with the pictures they stole from me.. The design is solid.. just be very careful with the threads.. The material is like butter..

@@camaroboy383 but could you make it still ? 🤫👀

@@Acornejo02 I'm sure I could fire up the machine and whip one up.. I'm swamped right now though so it would probably be a week before I get to it.. completely up to you sir..let me know and I can get the ball rolling for you if you want..👍

@@Acornejo02 how many would you need?

I got a Felony, and infraction 3s and a big rock 3s I really don't know what I need so let me figure that out first but so far I could use at least 2.

Thank you sir.. greatly appreciate that..🙏

Your very welcome man.. thanks for checking it out and dropping a comment...🙏... Have fun with that thing..😎

Thanks, appreciate that..👍..

Im all so running the 20 tooth in my in fraction 6s it gets a little hot I do want to upgrade the fans have you ran the speed pinon gear yet 27 tooth??🎮🏎️😜

I prefer the 20t for street bashing for sure... good balance of torque and speed.. 😎 I have run the 27t, car ran about 83mph in about 400ft with a pair of cheapo zeee lipo's.. 👍 If your not speed running I'd suggest lowering the motor timing in the esc, the factory set 20+ degree's creates a lot of heat for very little real world gains.. I personally wouldn't run anymore than 15* of timing on that combo..

@@camaroboy383 I agree I ran the 27 yesterday and hit 92 mph

@@mikelester5524 killer..💪

If the center diff binds I would check your center dog bone didn't fall out of the front input cup.. sometimes it's a pain to get that shaft seated in the cup properly

The main motor mount sliding screws stripped?..

@@camaroboy383 yes. Sliding screws stripped

@@JohnPopeye well you have a couple options.. You can use a torx bit that is just bigger than the original hex size and pound it into the screw head with a hammer.. (think it's a t15) ...It will hobb its own teeth into the screw.. heat the screw with a torch and it should come out.. Option 2 is take a Dremel with a cut off wheel and slice a slot into the screw so you can use a flat head screwdriver to remove it... Again, a lot of heat is needed to break down the Loctite...

@@camaroboy383 thank you so much for taking the time to explain. I'll definitely try that

@@JohnPopeye no problem at all, any time...✌️

Thanks for taking the time to check out the video, much appreciated.. I'm still printing them now and then, plan was to produce them in vacuum formed polycarbonate, but life just got in the way... I can still print them if your interested.. 👍

@@camaroboy383 Yes sir!! I would be super interested in two of them, I got my father and I matching black Arrma Felony’s for Christmas 🎄

@@armandom8265 , no problem, give me a few day's and I'll get some going.. were you interested in the front air dam's as well? Or just the rear tail pans?..

@@camaroboy383 Just the rear tail pans please. And thank you for your time, I appreciate it 🫡

@@armandom8265 hello sir.. still interested in the tail pan for the felony? I have a couple here ready.. just let me know...✌️

Yes, they can be found at cgtrader.com... 👍...