Video

Ip address to 192.168. start hota h

Id adress kuchh samjh m nhi aya

What switch is used in this case?

thanks thanks a big help for me being installer.

Hi, any ideas on stopping people stealing these things? Thanks.

hoax

super helpful! this finally gave me a clue how to do scheduled controls for my vlans

hi, can you tell me that the license is necessary to purchase for configure multiple access point in mesh topology with cloud base controller??

Where have you got the network to discover cameras without Ethernet wire plugged in NVR

If I have an access point in mesh mode , can I use the Ethernet port that’s in the access point and connect a Lan switch to it ?

What's the controller use for?

它可以用AP接16個C100嗎?

Thank you

how did you bypass the ssl certificate thing?

can we connect thirdparty smart cameras and ip cameras with tp link vigi nvr?

Adakah video tutorial Setting perubahan IP?

Daaamn thanks mate

this is a tutorial turn down the music

😊

does this need a computer running 24/7 to use the vpn?

Why this is so overcomplicated.

Which of your wireless routers have the DHCP functionality of issuing its own IP range.

냉각 팬이 있나요?

I'm trying to figure out if one access point is enough per floor or should I make sure I have one at every room or lotation where I need wifi. My house is 100% concrete and steel.

Do you need the controller for the mesh network? I plan to use two AP’s hardwired via cat 6

Excellent video! Thanks!

Does the fast roaming feature only available at omada and not available within the router settings ?

How do I get My switch to show up in the device tab instead of the client tab. it is connected but I can't configure it with the controller.my system is all the omada line the controller the 16 poe switch and the router.so I thought it would link up as shown in this and many other videos

How to set up wired mesh on all EAP on the same subnet? Thank you.

Omada controller that include Pharos in one is the best. All in one solution. When?

In a Omada mesh can you set up a single SSID and use voucher system to login in multiple EAP’s?

I'm planing a network (which already has a outdoor EAP on the house connected to standard router.) Plan is ISP optic > NTD > Router with Outdoor EAP + OC200 attached to this as the Wired EAP starting point. Then mesh to an EAP outdoor mounted to a cottage - question is will the "Wireless Mesh EAP" allow internet to be extracted from the Ethernet port on the PoE adaptor, such that it could be put into a dumb switch for wired devices in the cottage? Or is it only WiFi at the client AP end?

I can't access my TP-Link Pharos It's says err ssl version or cipher mismatch Can you help me with this?

Can we set up all the AEP wired or Backhaul connection for Omada Mesh?

Hi I have 4 non vigi tp link cameras .. can I bind it with this nvr wirelessly.

Could this have been any cameras or it has to be tp link camera you have to use?

I have the ER7206 router, SG2210P switch, and 4 EAP610 APs, 2 upstairs and two down. With just a single SSID based on my LAN, signal strength is great on all APs. When I setup a VLAN for wired and wireless with a separate SSID, I get no internet. Ideas?

I have a EAP660HD installed and I still have some weak signal spot at the top floor of a multi-level home. I am getting a 2nd AP for the top floor. Do I need the OC200 controller to create the mesh network? 22June Well, I have an update on it. A complete change of the situation. I have to clarify that I do not use mesh system as I have ethernet cable to the AP. I understand more about setup. I changed the AP location to the attic , beaming downward and I use a WIfi6 mobile phone to verify on the coverage. I have a complete coverage of the whole house (B, G, 1, 2 ,Attic)plus outside in the garden as well. Full strength Wifi6,. At 1F, on the mobile phone indicates 900M network speed to AP. hmmm, I have an overkill powerful AP, but I only need to install one, not multiples, nor many recycle router as AP.

Excellent video

Thank you for your steps by steps approach, was the best I got to be able to set up successfully.

every example i see is with one AP connected to the router with a network cable and the other APs meshed wirelessly... can i have all APs hooked up via cat6 and create a mesh using the cable as it's backhaul?

Is EAP225 outdoor wirelessly meshable. Same as example above. One eap wired and two more eap225s wirelessly meshed to the first ?

great tutorial, thanks

- "Vigi Security Manager" is a windows software - This setup is fully done without the Vigi NVR ? - Do the VIGI individual cameras have their own web interface or similar that allows basic settings like RTSP settings so it will not depend on external TP-Link software for initial setup ?

Hi there , at 09:51 when you wanted to created vlan 10 why you didnt change it to vlan option insted of interface ? , besides at 10:12 when you wanted to created vlan 20 you select interface insted of vlan option why ?? thnx

i live in delhi and tp link 710 is installed in my office there is no net at home so i can use office net to use home net my home is 25 kms away from office between which traffic signals multi all If I live in Delhi, then I put airspace on its tower, then I live in their bungalows in the basement of my house and second, if I put the tower in my balcony above, will it work, how much range can it cover? Will it cover a range of 25 kms?

Please shrink down those ceiling APs. Honestly, people are afraid of them overhead. In a warehouse no problem in a low ceiling office or home definitely a problem.

Hi there, I saw that your motion detection have box when it detected human and my question is do really VIGI Surveillance have a function to trigger motion when it detect human or vehicles?

How many Mesh it can handle?

How many mesh it can handle?