Video

Thanks for your video, I've been watching videos and is not so hard to do it, but all the videos shows on car elevator which make easier the work. I don't have one, just my jack and 2 jack stands just like you! greatings from Honduras!

Great

How do you test if the wire harness is working properly?

I changed the handle on my sonota and the button still doesn’t unlock my door. Please help

Boss man, I don't have a connector for the plug opposite the control valve connector. I'm curious to know how it got power the last 7 years. Ac just took a shit. Could that plug be useless. Looked everywhere under the car. Only have the control valve connector. Great video, btw. It's hot asf in Miami. Any help is appreciated.

Solid 👍

OMG, i rarely put reviews on CZcams but it is an obligation to put one today. I did the exact same steps and my issue got fixed right away. Thanks so much

The process was explained concisely. Thank you!

Part numbers? Links?

Same as e-350?

Thanks a million!

Thank for the clip. It did not work on my Highlander. Please what do I do again?

you need to wrap those lug nut threads with cloth when you put those pry bars.

This wouldn't cause my floor boards to be wet would it?

Merci beaucoup

Thermostat housing bolt size 10mm same as other one?

was there a retainer at the transmission side ? 03 Forester and I need to see how it goes back together and stays together.... I put mine back together but drove it and heard click, etc, and noticed axle had popped out 3/8 inch at the transmission, WTH. Tired and disappointed at the moment. Maybe there is no retainer ?

Thank you sir. All I really wanted to know is if I'm going to have to pull the dash apart to get the expansion valve. You can make it short with that information

This was just what I needed! Clear explanation, list of needed tools, and some great tips made it clear to me that I can do this job myself. Liked and subscribed, Sir. Keep up the good work!

Thanks for the video 💯

I think if you use rubber type of material like the bike tire inner tube instead of the red rag which slips and spins that would make it not spin when you turn the nut.

Gracias!!

Right on the money 👏👏

So aside from needing the car raise for your own access, does the vehicle really need to be lifted off the front wheels when changing out sway bar bushings? Because if not, I'd like to use ramps. Thoughts?

Thanks, more video's please 🙏

I have a 2012 X Premium Forester - what's the part number on this thing? I'd like to order it ahead of time as mine is rusted like yours! EDIT: Looks like 14050AA992 is the latest for my car. Also, what do you recommend for a procedure for draining/refilling coolant? Is there a special bleed procedure? Thank you!! This is an awesome video!

Thanks for taking the time to make this video.

This is such a helpful video! Do you know if there universal parking brake cables will work with a Nissan Frontier? I know "universal" is in the name but the length seems far too great from the products I'm finding online

Wow, this is exactly what I've been searching for my Hyundai Accent.

I just chwnged the battery in the fob. All it does is blink red. The button on ignition doesnt do anything

Jiffy lube broke my plug. And tried to cover it with glue and I took it to them because I was just feeling lazy to do it that day after a 13 hr shift so I took it to them and this happens. It was time for the next one and it’s when I turned the drain plug it popped right off and seen the glue they used.

their are a lot easier ways!

Hello, how are you? Thank you for your video. Is it normal for there to be water in that hose that connects to the EGR valve? Because as I see when you removed it there is water there. Greetings from Honduras.

Never have to remove a skid plate keep one bolt in and it will swing out of the way for filter access. Choose wisely. 😮😅

Gracias, funcionó, creo que se me activó por que desconecté el air sensor, se me olvido conectarlo cuando encendí el vehiculo

Whats the name of the part

0:17 vsc reference

Where can I get the replacement

Please, I had the same problem for weeks

You have a empty connector by the accelerator connector. I have that too. No other video shows that. I tried to find what is supposed to go in that connector for a long time....but nothing goes in that empty connector!

BWCC 💪🏾

It's been a while since I did this using HF Holt brand. When you pull at 6:58 , try to create a seal and keeping the reservoir full as much as possible as it depletes then keep refilling. I used about 2Q and didn't have to bleed the air at all in the end. It was turning nicely and smooth. God, I wish I took a photo kicking myself now cuz I don't remember how I hooked it up to create a tight seal. It was so simple too. I used the heck out of this fluid extractor it's a game change for me. I used for just about everything from brake to oil to PS you name it. Brake was a life saver comparing to Mightyvac hand pump. I love using Fluid Extractor wishing more people use it frequently. For oil, it actually pulled to bottom of the pan because the oil nut sits 1" higher than bottom so I was always stuck with old oil contaminate new oil

This must be a common issue for the Hyundai models for those years because I have a 2012 Elantra that I just bought a couple of weeks ago and it has this exact same issue

Omg!! My key fob has been dying over and over again in the worst of situations! Thank you man 😊so simple..yet I would’ve never known!

What a shame!

Thank you for video gonna tackle mine now!

Thanks!

Hey boss. Very excellent job , camera angle & clear instructions. Quick Question is how do I know that my bump stop and mount are in good condition. My vehicle is very lowered from back. Nothing in the trunk but still lowered no oil on shocks. I want to replace the shocks but I just want to make sure that my bump stop and mount are also good before installing the new shocks. My vehicle mileage is 140k. 2014 Hyundai Sonata GLS. Will be highly appreciated for your answer and guidance. Thank you so much. God Bless.

As you have talked about back up fuse #7. I replaced it and problem solved for a month or so. Now same problem is back. I thought I can follow the same procedure, but problem remains. It did NOT work this time. Any suggestions?

One step you missed, apply some grease on the new oil seal lip and pulley journal, this would prevent pre-mature wear. on any lip seal.