The Electronic Hobbyist
The Electronic Hobbyist
  • 13
  • 2 511 363
The Duke Supervises as I work on a Zenith Trans-Oceanic
I'm working on a Zenith Trans-Oceanic receiver, and experimenting with taking time-lapse videos of the process.
Last night I was doing some work on it and my cat The Duke decided to hang out to keep an eye on things. Someone has to make sure I don't break something!
zhlédnutí: 1 269

Video

Repairing an Antique Speaker Cone with Liquid Latex
zhlédnutí 1,2KPřed 2 lety
I've been working on restoring this antique Howard 901-A radio, and one of its problems is that it has a pretty badly rotted and torn speaker cone. Since it's not a very rare or valuable radio, I decided to try a technique for repairing damaged speakers that I've been thinking about for a while- using tissue paper and liquid latex to cover holes and patch tears in the speaker cone. The results ...
Howard 901-A turned on for first time in 60-plus years
zhlédnutí 541Před 2 lety
I've been working on restoring an old Howard 901-A tabletop radio from around 1946 to working order. It's nothing special, but it was in absolutely dire shape when I got it. I'm pretty sure it hasn't been used since the 1950s. After replacing all the capacitors and most of the resistors, I fired it up and it worked without even having to align it! Picked up some local AM stations instantly. I'm...
EHV#6 - Reverse Engineering and Analyzing a Thyratron-Driven Selmer "Metronoma" from the 1950s
zhlédnutí 1,2KPřed 2 lety
I was given this electromechanical metronome from the 1950s to go over for safety, and was surprised to find it had what I first thought was a vacuum tube in it. It turned out to be a gas discharge tube called a "Thyratron", which I found fascinating. In this video I discuss what a thyratron is, its principle of operation and how it works in this specific circuit, and also show how the circuit ...
EHV #6- Repairing and Restoring a DSI 3600A Frequency Counter (from 1978!)
zhlédnutí 657Před 2 lety
In this video I show you the steps I took to analyze and repair a DSI 3600A frequency counter, produced by DSI in 1978. In theory it'll work up to 600 MHz with the prescaler, but in the case of this one neither the direct nor the prescaled inputs were working. However, in the end I got it working well enough for my purposes!
EHV #5- Replacing the IF Relay on a Kenwood TS-130S (and much more)
zhlédnutí 1,8KPřed 2 lety
Originally this video was to be about replacing the Omron LZN4 relay on the IF board of a Kenwood TS-130S amateur radio transceiver to fix the "desense" problem on switching from transmit to receive. On many older Kenwood transceivers like the TS-130S, the relays get a bit manky with oxidation and stop working properly. A symptom of this is when you switch from "Send" to "Receive" the transceiv...
EHV #4- Replacing the RF Attenuator Relay on a Kenwood TS-130S
zhlédnutí 916Před 2 lety
This is the same Kenwood TS-130S I was showing in a previous video- it works, but after 40 years, it's got a few things that need fixing. Specifically, some relays on these old Kenwood transceivers tend to get a bit dodgy, their contacts get corroded and/or oxidized, and they don't work properly. In this case, the RF attenuator relaly was simply not working at all, so I replaced it with a NOS v...
EHV #3 - I was gifted a bunch of Amateur Radio (Ham radio) gear!
zhlédnutí 698Před 2 lety
A friend of mine who knows how much I enjoy amateur radio gifted me a bunch of older gear he didn't have any need for. In this video I "unbox" it and go through the stuff I got and how cool it is. Much of the gear is older, some from the 1960s, 70s' and 80s, but all appears to be functional or serviceable- in that it isn't beyond reasonable repair or restoration efforts. I'll be doing more vide...
A BK-100 "Coffin Bug" CW key in operation
zhlédnutí 848Před 2 lety
I was given some radio equipment including this CW (Morse Code) key, which I was unfamiliar with. A few questions answered later and I was able to get it working. This is a "Coffin Bug" type of key, and is based on the Vibroplex design, which is a semi-automatic keyer. Dashes are done by pushing the paddle in one direction, dots are done automatically by pushing it the other direction. It saves...
EHV #2- I Made a Capacitor!
zhlédnutí 257Před 2 lety
On a whim I decided it would be interesting to make a capacitor out of tinfoil and wax paper. In this video: *I discuss capacitor theory and design * Show you a time lapse of me making my homemade capacitor * Show you how you can use an oscilloscope and signal generator to analyze a capacitor. * Analyze both an off-the-shelf capacitor and my homemade one. Timestamps: 00:00 Introduction 04:37 Ti...
EHV #1- How Geiger Counters Work
zhlédnutí 535Před 2 lety
Were you ever curious about what exactly makes a Geiger Counter work? In this video I explain the basic principles of operation of a Geiger Counter and demonstrate one in operation. NOTES: * At 18:25 I say "alpha" particles, I should have said "beta". * Uranium doesn't emit very much beta or gamma radiation, but it does decay into other materials that do, which is why this Geiger counter can pi...
School Bus Pre-Trip Inspection
zhlédnutí 2,5MPřed 2 lety
Before a school bus leaves the yard, it must go through a thorough pre-trip inspection. This is what one looks like. I recorded myself with a GoPro doing a pre-trip inspection on a school bus prior to a field trip. The second half of the video shows the drive to the school with the empty bus. If you've ever been curious about how a school bus is operated, this may be interesting to you.
Tearing down and replacing the tube in a TS-1 Mark 2 Microphone
zhlédnutí 576Před 2 lety
I had to replace the tube in my TS-1 Mark 2 microphone. This is the teardown and replacement process. NOTE: This video has some quality issues, including some blur, the audio has issues, and at some points framing problems. It is an experiment in using my GoPro for up close video recording, and while I learned quite a lot in this process, there's clearly some issues with the video. I'm using it...

Komentáře

  • @imaginarytube
    @imaginarytube Před měsícem

    Thank you for posting. Very helpful!

  • @TnseWlms
    @TnseWlms Před 8 měsíci

    You never forget something you learned from someone other than a parent or teacher. I went to school during the energy crisis, with gas rationing, extended daylight saving time and constant reminders to turn off all unnecessary lights. One kid asked the school bus driver why he has the headlights on the middle of the day, thinking it is a waste of energy. The driver said, "Safety comes first. Then comes conservation."

  • @offgridsolaruk843
    @offgridsolaruk843 Před 8 měsíci

    What about black liquid latex?

  • @Michael-u9f
    @Michael-u9f Před 9 měsíci

    The turn signal is so cool 😮

  • @user-kn5pr4sv7u
    @user-kn5pr4sv7u Před 9 měsíci

    Can you be my bus driver

  • @luannepassmore4311
    @luannepassmore4311 Před 9 měsíci

    Will i ever ride one of these kinds of buses at Andover elementary

  • @DACIAJWAN
    @DACIAJWAN Před 9 měsíci

    I want this bus

  • @TnseWlms
    @TnseWlms Před 10 měsíci

    When I was a kid, it said "Unlawful to pass while loading or unloading..." on the back of the bus. I misread the word as "unawful" meaning not awful, or okay.

  • @rubyrahman8135
    @rubyrahman8135 Před 10 měsíci

    14:52 Bus 76 Backing

  • @tjsogmc
    @tjsogmc Před rokem

    Very interesting, I have this same metronome. Just think, the guys that designed this did so with pencil and paper using manual calculations.

  • @barrytrewern3347
    @barrytrewern3347 Před rokem

    from an old carpet layer that has grown up with using latex, and I might add that it was probably only 60 per cent pure so you could use a thin wipe over at the split .it is the same product that they make condoms out off so it will stretch and move with the vibration of the cone😃

  • @Cutekittens4471
    @Cutekittens4471 Před rokem

    A LOT OF BLUE BIRD BUSES AND THOMAS BUSES ARE BECOMING OLD AND NEW! AND AT 3:00 I HEARD THAT SOUND!!!

  • @danieloconnor5712
    @danieloconnor5712 Před rokem

    Awesome Video 😄☘️

  • @kaylaassatta923
    @kaylaassatta923 Před rokem

    I have never saw such a clean school buses inside and out.

  • @schoolbusguru3157
    @schoolbusguru3157 Před rokem

    Can you do a video like this on the efx

  • @mobileblacknwhite
    @mobileblacknwhite Před rokem

    Dang, thats alot of “blue birds”.

  • @thefalconmckwean
    @thefalconmckwean Před 2 lety

    This radio is in good hands. [: - Adam

  • @Loveplayinggames
    @Loveplayinggames Před 2 lety

    前面那根是做什麼用的

    • @clxdyy_
      @clxdyy_ Před rokem

      It’s a flat-nosed bus, meaning that it’s engine is centered or in the rear.

    • @james9415
      @james9415 Před rokem

      I don't know

    • @theelectronichobbyist1639
      @theelectronichobbyist1639 Před rokem

      This one is a rear engine, but some Type D (flat-nosed or "transit" types) do have front engines. There's a cover called the "doghouse" over them between the driver and the front door on front-engine flat-front buses.

    • @michelledodson3917
      @michelledodson3917 Před rokem

      @@theelectronichobbyist1639 thank u

  • @leynyc212
    @leynyc212 Před 2 lety

    I love this vid!!!!!!!!!

  • @JC20XX
    @JC20XX Před 2 lety

    Commenting for engagement and so I remember to come back later

  • @ferretman6790
    @ferretman6790 Před 2 lety

    3:00 Childhood memories that I completely forgot about just came back when I heard that sound

  • @keithhykes3666
    @keithhykes3666 Před 2 lety

    Corey snow i love that Thomas hdx

  • @dubberman2.0
    @dubberman2.0 Před 2 lety

    “Please tell me this is a normal field trip” - Arnold [via The Magic School Bus]