Video

The metal section near the wires at the bottom. And the plastic cover near the sensors on the titan. Has to becareful with wiring as it’s got a lot of room now. It’s the part the gate manual incorrectly tells you to mod.

@@JohnGold137 I see all comments. You will have to be more descriptive about your “movement” and so I can understand what’s going on in front of you. With a locking ring done up I’m not sure how it would move.

@@Eagle6Airsoft sorry, what I mean is that when I press on the bolt release or shoot the gun, I can hear the buffer spring Release forwards

bottom?

@@sebastianwhite-o4n hi, we don’t really do cheap or cheapest, it’s not worth the extra hassle for our techs verses saving you a few pounds and using up a limited slot in our workshop queue. Gate Titan is 135 and labour is 120. I would recommend a power spring as well at least. Eta is about 3 - 4 weeks during peek summer.

@Eagle6Airsoft Alright thank you 👍

@@ricardoroumimper1543 hi, you can’t fit the hand guard on sd6 but wii tech do a sd6 hand guard. If that’s what you want. We most 1300mah - 1600mah 7.4v lipos in stock configuration fit this replica. I like the lp302 from vapextech it fits both a5 and sd6

@@Eagle6Airsoft Thanks for the feedback.

With proper hop 0.30 is shooting at 245-250, which is 0.8j now with FPS spring guide and everything mentioned. Damn I wish I can figure this out

@@agenttexx we played Marui bingo when it first came out. We made a list of everything we wanted fixing from crap hop unit, plastic body, stock wobble, too dream additions like etu, recoil and bolt stop and Marui added them all and others we hadn’t thought of. This is not only the best electric mp5 on the market it’s possible one of the best aegs ever produced.

They should be in the video description.

@@Eagle6Airsoft hi has this been shipped

The "Next Generation Recoil System" acronym is... unfortunate

next gen recoil shock

@@EnmaRyuzawa98 try switching to full auto, hold the charge handle back and fire

@@EnmaRyuzawa98 with no mag in it

@@Eagle6Airsoft hold for how long?

@@Eagle6Airsoft nice! I've tried it and it turned on! Any clues as to why this happened?

@@EnmaRyuzawa98 it’s single shot lock up or what they used to call v2 lock up with an eccentric bolt stop system. Make sure to do full complete trigger pulls all the way to the rear each time.

just turn the bevel gear half a turn and it will move the piston back enough to now push forwards

@@Eagle6Airsoft thanks I’ll try that

im trying to get these back in but we lost our supplier and as im sure you have noticed on the internet there is a weird shortage of these.

@@user-xy7yi8dr5i we do ship to Korea, and remove Airsoft references. But only ups. At the top of the webpage, parts and upgrades, then scroll down internal upgrade parts aeg until you see tune up kits. Then look for the picture of the sd6 ngrs

@@stubbox8629 thank you, it can over hop 0.32 past 65m

@@derekporter66 when I do it’s often over, we range test, then chrono and if it’s over reduce to the customers requirements. We send guns world wide, so fps will depend on the customers local field requirements.

@@Eagle6Airsoft so if i wanted a backyard plinker with 600 fps is this possible

@@derekporter66 I don’t think it’s something we could help with it’s has to be in the uk, a: for skirmishing b: 600 is actually beyond what airsoft guns can reach any way. I don’t think as a business we would be able to provide that for the uk. The most we could do would be 500 and it would have to have full auto disabled. 370 is max in the uk with full auto enabled.

@@Eagle6Airsoft ok thanks

@@derekporter66 each retailer in each region has access to different brands, and same exclusive. I’m afraid anything at that point might be simply what they have available to the person reviewing. We stock the g&g raider at that price point. Not much upgrade ability long term externally but internally and externally very robust with g&g offer spares albeit expensive shipping on those spares. We as a smaller store with an active and hopefully well regarded workshop choose Tokyo Marui as our specialty, they have been making replicas since 1990, and in 2009 started making there next generation line up. Which is our personal favorite, if you are struggling to get new maybe try and haggle someone down on a second hand deal. When paying more for airsoft guns you essentially get better externals and more features typically. Maybe more accurate attention to details like sizing and trades, more compatibility and spares that fit, more upgradability as they like to make parts that fit more expensive models as they will be around longer. Next gen models also offer immersive features like bolt stop simulation and recoil simulation. G&g raiders robust, I here specna arms offer a lot for the money as do delta armour and evolution. Go m4 that way internal parts are cheap enough to replace if the retailer has skimped on reliability.

@@Eagle6Airsoft thankyou

@@Dizzyfatpigeon kind words, thanks 🙏, would be nice to get back on the video band wagon at somepoint.

@@edgardo9003 yes, as in pull the trigger and the mechanism will click but it will not fire without gas.

@@Eagle6Airsoft Can you pull the hammer to fire it manually?

@@edgardo9003 you can cock it and then fire it but it will require gas to fire.

Can you fan the pistol like a revolver?

@@edgardo9003 nope

@@emmanaguilar1707 yes you do.

in the storm, the jefftron is the prefered unit. it has more features and works better with the bolt simulation system.

The gate also goes full auto in semi because of how the trigger works. You cant really do this with a jefftron unless you spam it like crazy.

@@no__name3747 gate Titan isn’t compatible with ngrs gears. Only gate aster. I should have been more specific on the reply to op.

we do functional testing to 65m meters, it may well go further but all we require of our builds is they hit 65m on average with a flat ish straight shot.

Tm send them to distributors and hand them out at trade shows. Or you can down load the posters from the website and have them printed.

We have a tune up kit builder that guides you through this in the upgrade kit section - under the parts menu on our website. It will only show you relevant parts

@@Eagle6Airsoft great thank you I’ll take a look!

There are advantages to plastic gun, the weight being the main one. Many write this off as too expensive but it’s a nice high quality base to start with for upgrades.

hi, internally flat triggers or ak triggers are the same. the shape of the trigger is all that changes, thus the amount it pulls interms of distance remains the same. you would have to clarify the question a bit more i think as to why you think a changed trigger might now be slow to pull.

heresy

There was no customisation for this gun at the time, it was a quick electrical fix and demo.

@@Eagle6Airsoft ok thanks you

gate aster mosfets have a power on pause

Absolutely. Lvl 1 is just the spring which will work fine. But you really get a lot of extra longevity from the stronger parts as well as some rof customisation from gear ratios.

The saiga uses the same as the old m92f. The ksg uses the twin version for 3 and 6 shot which is from the 870 only.