Video

V1 power supply fan is obnoxiously loud. Swapping out the fans and motherboard made it so much quieter

Great Video

I learned a lesson: the socket cap head screws fixing the two halves of the extruder will bore straight through if the stepper motor isn’t screwed in to the back first. Weird design choice, they should probably have used a washer or truss screw on the surface.

This is wrong. The thermal Pads should follow the Official Pi Cooler's pad placement, as it is clearly modeled after the official cooler. The thermal pads should be covering the CPU, Wifi Module (Shiny Rectangle) and Power Management Circuit. Ram and RP1 do not generate enough heat to require extra cooling and as such, a direct thermal connection from them to the heatsink will only subject them to further heat stress from the much hotter CPU (Thermal Conductance is a 2 way street.)

Thanks for an easy to understand tutorial. I didn't recieve the red nozzle. Have they changed it now?

Brilliant video.

My v3 SE has gotten into the habit of clogging at the end of every print. I use mainly PLA, and the clog turns up in the same place as you've shown in this video. What I do to unclog is preheat TPU, use a candle to heat up the tip of the cleaning rod and push it in and through the clog, then burn off the residue that sticks to the rod. Repeat about twice more until I can't feel anything impeding the movement of the rod and all is well and I can print again. My problem now is just the fact that it clogs after EVERY print.

Using a silicone spray for garage hinges worked for me. Thanks for the helpful tip.

Thank you so much for this info. Very helpful!❤

AHHHH🎉🎉🎉 I tried so many videos, this is the only one that worked for me and my situation THANK YOU

Edit: Turn the fracking thing off of 230v behind the printer if you are in Canada or America...

Sigh. I just bought this, returned it and bought another. Neither one will 'level' as yours did.

KakiDiy what kind of paint to use if our bicycle paint came out by little pint

thank you brother, i appreciate you !

Does this works good on home theater receivers because I use contact cleaner on a home theater receiver, circuit board. I had to open it up and clean off all the parts of the home theater receiver and it was working like brand new. It is safe to use on home theater receiver this particular spray bottle.? like a Sony home receiver, a RCA, or a stereo system receiver

I bought China tube type contact adhesive with needle tip,the instruction said need sand the surface of the part need to be glued together.Dunno apply or not lol.

Very helpful, thank you!

didnt know need to wait till dry touch, i have been doing it wrong

I wish I saw this before throwing out my old shoes with koyak soles.. 😅

En qué tienda de Perú puedo comprar la dremel

great video, but I have a question, here in the auto leveling, it shows me numbers of negative 0 and positive 0, with majority of it green boxes and on the further sides are blue, is it normal?

I have an ender 3 v3 se, and Ive been looking all over online but Can’t find anywhere what type of metal the filament drive gears in the extruder are? I wanted to run carbon fiber PETG but have heard you need to make sure your gears aren’t brass. I have a steel nozzle for it already also.. Would you happen to know if they are brass gears? Thank you very much!

All these USB types confused me.

Man, your a life saver!!!! This helped sooo much! I was so confused why it wasn't working 😅

A filament guide with mount for runout sensor would be even better...

Muchas gracias!! Me sirvió mucho la información!! Saludos

Thankyou this totally worked - was a bit nervous unscrewing all those screws lol - and praying you reversed it at the end so I could put it all back together again - but got the clog out and now its working perfect again.. It has given me the courage to now try on my 2 x flashforge ones lol

Hey, may I ask you a question about the Ender 3 v3 se?

Great video. I really like how you demonstrated checking squareness.

don't make the mistake of buying something tha tisn't EPSON that you can convert to CISS or has one alreadyu. Brother has a few also. Way less hassle than this crap

German flag spottet 🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪

Satu tungku tidak menyala merk niko reflesion phantom tanpa pematik ❤🙏

xyz cubes don’t account for a lot of things, including skew. not a good model to dial in dimensions

Receive my V3 se printer Tomorrow upgraded from the original ender 3

The newer version is incredibly silent. It's possible to print overnight without disturbing others 😃

Thank you for the tip for pulling a tiny part of the black foam to get the red layer off, I’ve been getting in a right mess trying to peel it off!

PM

this worked for me.... i was just stuck 5 minutes ago. thanks

mantap !

I need to sharpen my Bosch hand mower as I've had it for a year and I mow three areas of lawn. I've watched you tube videos on how to do this, but they mainly take a wheel off and I don't like to do this. I'm going to buy a flat file as this seems the easiest method though rather painstaking. Can using grinding paste and pushing lawnmower in reverse (backlapping) work just as effectively as taking a wheel off and using a drill? No lawn mowing shop will sharpen the blades, one shop outside the area will, but at a cost higher then the price of the lawn mower. It's an excellent grass cutter but needs sharpening urgently.

Great video, mine from 2019 is still printing great, I print mostly ABS. With an SKR mini E3 v1.2, metal extruder, BLtouch clone and capricorn tubing, I easily get 100mm/s and 800mm/s³ accel. PS: 2:45 You should back off the screw, it should not be touching the motor shaft and should be above the middle notch of the coupler, an easy way is to insert the spatula that came with the printer in the middle notch then insert the screw, it will make sure it stays above the notch.

lol wished I had this before I built mine. It was a headache especially since it’s the big model because the CR10-SE couldn’t fit barely in the medium one, but I do enjoy the extra space.

Yay

Always wondered what the micro usb was called, had many friends call it all sorts of things like "android charger" "type a" and "default charger" lol

Love usb c

USB Type A. 50% chance to get it plugged in, but 80% of the time, we get it wrong.😅😂

Is this stronger than the 3M vhb double sided tape? If i use this extreme with 3m 94 primer will it be stronger? Do you think it will be really strong for car dashboard to stick phone holder?

First of all don't break the depth gauge like I did on that model. 😢