Guy_with2cars
Guy_with2cars
  • 55
  • 118 036
How to calibrate air suspension (using VCDS) - AUDI A6
This video is intended to teach you how to calibrate the air suspension if you have done any work to the suspension or you have replaced the air struts , air compressor or air valve block.
Enjoy!
Like and subscribe!
zhlédnutí: 326

Video

BMC - Air Filter change - Audi A6 3.0 TFSI (CAJA)
zhlédnutí 20Před měsícem
Air filter change for an Audi A6 C6 - 3.0 TFSI No special tools required. You can easily do it on a Sunday morning. #100kview
Ep. 1 - Audi 3.0 TFSI - Oil Leaks
zhlédnutí 37Před měsícem
Episode 1 - Camshaft Adjuster Solenoid (3.0 TFSI, CAJA) O- ring WHT002789 (QTY - 2) One of the major oil leaks for this engine. Just a tiny o-ring that was turned into hard plastic over time.
Arnott Fail (dust cover broke after 2 years) - AUDI A6 C6 - 3.0 TFSI
zhlédnutí 13Před měsícem
Don't get me wrong, the air springs are still ok but honestly, it is not ok after only 2 years for the dust cover to just split like that. My old air springs have an intact dust cover still (after more than 15 years)
Save money on AC Condenser - Cheap fix - Audi A6 C6 3.0 TFSI
zhlédnutí 28Před měsícem
If you had an issue with your AC condenser on an AUDI 3.0 TFSI, I have found a way to save some money. The original part no. is 4F0260403R only for 3.0 TFSI Audi A6 which is pretty expensive. You can buy the other version 4F0260403P that has different supports. You just have to cut the old supports from your AC condenser and weld them on the new condenser. 4F0260403P this version you can find c...
Counter Strike 2 - Technical Timeout - Funny
zhlédnutí 82Před 8 měsíci
What do you actually do in a Technical Timeout?
VW Passat Service Reset - OIL Service RESET Procedure - No software or other equipment needed!!
zhlédnutí 39Před 8 měsíci
In this video I am presenting how to clear the SERVICE NOW message in a PASSAT B5 2002 Step 1: Press and hold right cluster button Step 2: Insert key in the ignition and turn it once (don't start the car) Step 3: Release the right cluster button and press once on it Step 4: Rotate clockwise (to the right) the left cluster button That's it!! You are done!
Audi A6 C6 3.0 TFSI Stage 1 # 0-100km/h
zhlédnutí 2,3KPřed 8 měsíci
0:00 Intro 0:11 Traction Control ON 0:21 Traction Control OFF Disclaimer Please do not replicate these actions. The speed presented in this video is fictional and edited to look fast. Thank you!
VCDS or ODIS? - Scan tool - Comparison and AUTO SCAN #audi #vw #skoda #seat #car
zhlédnutí 5KPřed 8 měsíci
VCDS or ODIS? - Scan tool - Comparison and AUTO SCAN #audi #vw #skoda #seat #car
VCDS Activate NEEDLE SWEEP - VW, AUDI, SKODA, SEAT - In under 2 MINUTES
zhlédnutí 25KPřed 8 měsíci
VCDS Activate NEEDLE SWEEP - VW, AUDI, SKODA, SEAT - In under 2 MINUTES
Audi A6 C6 3.0T Audi Night drive Romania FULL ASMR 4K
zhlédnutí 1,1KPřed 8 měsíci
Audi A6 C6 3.0T Audi Night drive Romania FULL ASMR 4K
Audi BMW Mercedes Supra Fanboy chat #funny #fail #audi #bmw #mercedes #supra #funnyvideo #fails
zhlédnutí 30Před 9 měsíci
Audi BMW Mercedes Supra Fanboy chat #funny #fail #audi #bmw #mercedes #supra #funnyvideo #fails
Audi A6 C6 3.0TFSI - Brutal Acceleration
zhlédnutí 6KPřed 9 měsíci
Audi A6 C6 3.0TFSI - Brutal Acceleration
Night drive through Bucharest (Time-lapse)
zhlédnutí 154Před 9 měsíci
Night drive through Bucharest (Time-lapse)
Audi S3 8L AMK 210hp acceleration 7000rpm!!
zhlédnutí 296Před 9 měsíci
Audi S3 8L AMK 210hp acceleration 7000rpm!!
Destroying the clutch back in 2010 VW 1.9 TDI 131hp
zhlédnutí 873Před 9 měsíci
Destroying the clutch back in 2010 VW 1.9 TDI 131hp
VW 1.9 TDI 131hp 0-100 Acceleration
zhlédnutí 914Před 9 měsíci
VW 1.9 TDI 131hp 0-100 Acceleration
AUDI A6 3.0 TFSI - Vacuum Pump cleaning and Disassembling (FULL ASMR - 4K)
zhlédnutí 145Před 9 měsíci
AUDI A6 3.0 TFSI - Vacuum Pump cleaning and Disassembling (FULL ASMR - 4K)
AUDI A6 3.0 TFSI Supercharger Removal (FULL ASMR - 4K)
zhlédnutí 131Před 9 měsíci
AUDI A6 3.0 TFSI Supercharger Removal (FULL ASMR - 4K)
Microsoft Surface Book 2 - Battery replacement (FULL ASMR - 4K)
zhlédnutí 4,4KPřed 9 měsíci
Microsoft Surface Book 2 - Battery replacement (FULL ASMR - 4K)
Audi, Volkswagen, Seat, Skoda door lock control module fix Repair and door panel removal for AUDI A6
zhlédnutí 25KPřed 3 lety
Audi, Volkswagen, Seat, Skoda door lock control module fix Repair and door panel removal for AUDI A6
AUDI A6 C6 3.0 TFSI - OIL CHANGE DIY
zhlédnutí 1,8KPřed 3 lety
AUDI A6 C6 3.0 TFSI - OIL CHANGE DIY
Audi A6 C6 3.0TFSI - Intro and REVS (Finally here)
zhlédnutí 400Před 3 lety
Audi A6 C6 3.0TFSI - Intro and REVS (Finally here)
Passat 1.9 tdi 2002 - Probleme semnalizare si avarii (pa caterinca)
zhlédnutí 4,9KPřed 3 lety
Passat 1.9 tdi 2002 - Probleme semnalizare si avarii (pa caterinca)

Komentáře

  • @a8f235
    @a8f235 Před 3 dny

    Would be good to say what the purpose is.

  • @JordLikesCars
    @JordLikesCars Před 6 dny

    Only shows on some models, tried with golf mk5 1.6fsi and seat Ibiza 1.4 tsi doesnt show, im using latest vagcom

  • @windischbauer_r32
    @windischbauer_r32 Před 27 dny

    Hello. Does it work on a Golf 4 R32 from 2003?

  • @martinpiroh1240
    @martinpiroh1240 Před 29 dny

    What if the right side is higher 1 cm? How can I make it even?

    • @thegrumpyoldbusdriver
      @thegrumpyoldbusdriver Před 15 dny

      Normally the car should be levelling itself, if it doesn’t after you enter all the measurements and confirming at the last step, take the car for a test drive, around a mile distance should be ok, after that come back and measure all the wheels again! If there is difference in measurements, like you said 1 cm, log in on vcds and do the same step again for all wheels inserting the values you have but the wheel that sits higher or lower enter the value you need to be at the level with the other side, keeping in mind if you need to increase the level you put a lower number and if you decrease the level put the higher number! The lower the number, the higher the car will sit! If one side is 405 and the other is 395, to get it at 405 from 395 you insert 415 in vcds!

  • @drazennikic772
    @drazennikic772 Před měsícem

    hello .. audi a4 b7 2006 year ...does it work ?????

  • @yahyabahi1069
    @yahyabahi1069 Před měsícem

    Thanks

  • @kacperolszowski1331
    @kacperolszowski1331 Před 2 měsíci

    What if long coding helper options is not appearing?

  • @TomaszTrybu
    @TomaszTrybu Před 2 měsíci

    Git😊

  • @BataokeBoet
    @BataokeBoet Před 2 měsíci

    Mulțumesc

  • @shreaksomebody7094
    @shreaksomebody7094 Před 3 měsíci

    It is showing function not available.

  • @Th3_Gael
    @Th3_Gael Před 3 měsíci

    Do these both use the same dongle/adapter thing?

    • @JaroslawS1989
      @JaroslawS1989 Před 3 měsíci

      No, there is different interface (dongle)

    • @Th3_Gael
      @Th3_Gael Před 3 měsíci

      @@JaroslawS1989 thankyou

    • @77wassu
      @77wassu Před měsícem

      Yes, as @JaroslawS1989 said, there are two separate interfaces and cables. Go with VCDS, it's much more easy to use :P for normal stuff.

  • @hamsterdangler
    @hamsterdangler Před 3 měsíci

    I just wasted $295 including delivery on VCDS Hex in an attempt to get my electric tailgate working. When closed the tailgate module showed that it was 66% open, I just wanted to change that value in 6D to zero. VCDS cannot do it, they have been very little help so far, can ODIS? It seems such a simple thing, so many other codes can be easily changed and I do not know how to find security codes or even if they are needed.

    • @77wassu
      @77wassu Před měsícem

      For reprogramming and use extensive module functions ODIS is the way to go for sure.

  • @FUNNYVlDS
    @FUNNYVlDS Před 5 měsíci

    I just got a car recently bro it’s the 2011 Audi a6 3.0t prestige my first car. I gotta question So the eps button is the traction control? Does it turn back on itself or do you need to turn on after the pull? I haven’t launched it yet without traction off cus Im honestly just finding out about launch mode n the difference

    • @77wassu
      @77wassu Před 4 měsíci

      Nice! If you press one the ESP button. It will turn off traction control and after up to approximately 70km/h it will turn back on automatically. Only if you press and hold the ESP button you will inactivate traction control and the electronic stability program for good and it will not turn on until you press it again. Enjoy your car bro! It’s a beast!

    • @FUNNYVlDS
      @FUNNYVlDS Před 4 měsíci

      @@77wassu thank you man , i subscribed to your channel I appreciate the response

  • @hansaniarchibald6919
    @hansaniarchibald6919 Před 5 měsíci

    Is this the 13.5" or the 15" model. Are the replacement batteries different for each model?

    • @77wassu
      @77wassu Před 4 měsíci

      Yes there are different, check with your laptop type on one of the dedicated sites for battery replacement like ifixit.com/store and search for your laptop. You will see the battery needed. Cheers

  • @1hara1
    @1hara1 Před 5 měsíci

    Great video! Do you have any contact so we can talk, I have a few questions. Email or Instagram?

  • @Thelakedr
    @Thelakedr Před 5 měsíci

    So what I've seen online about ODIS is every time you use it you have to pay $50 and that will only give you access for 1 hour and then you have to pay another $50 to use it again for another hour after you purchase the software and Hardware is this true.

    • @alinduta5398
      @alinduta5398 Před 3 měsíci

      you refering the programing function?

    • @77wassu
      @77wassu Před měsícem

      If you want to change units (ECU,CD changer, AC electronic unit, etc) in you car you must use ODIS online to remove the component protection and program the new installed units, but for the rest of the procedures everything is mainly offline.

  • @jayperalta4665
    @jayperalta4665 Před 6 měsíci

    Great video. Can you pull key pin codes with any of these programs to program new keys or fobs?

  • @landuXD
    @landuXD Před 6 měsíci

    What cable do you use? Hex V2?

  • @valistanciu179
    @valistanciu179 Před 6 měsíci

    Mulțumesc foarte mult mi-ai fost de folos❤😊

  • @valistanciu179
    @valistanciu179 Před 6 měsíci

    Salut la mine merge dar merge întrerupt ,ce are ?

  • @zbigniewrichard8291
    @zbigniewrichard8291 Před 6 měsíci

    VCDS won for me because of the scan speed.

    • @77wassu
      @77wassu Před 6 měsíci

      Yes the scan speed is good working with VCDS

  • @FookLuck
    @FookLuck Před 6 měsíci

    can you do it on audi a3 2006

    • @77wassu
      @77wassu Před 6 měsíci

      Hi, I will look into it but from my knowledge this was possible starting with approximately 2009 ( facelift versions) onwards

  • @PVflying
    @PVflying Před 7 měsíci

    Really good of you to make this video to help others. I’m gonna have to attempt this soon as my driver’s door is doing exactly what you showed.

  • @TheAmbassadorOfQuan
    @TheAmbassadorOfQuan Před 7 měsíci

    This guy is really bad at this

  • @TheAmbassadorOfQuan
    @TheAmbassadorOfQuan Před 7 měsíci

    clearly cut his finger in the process...

    • @77wassu
      @77wassu Před 7 měsíci

      Yeah it was a pain in the *** to get that battery out 😅

    • @77wassu
      @77wassu Před 7 měsíci

      And finger

    • @TheAmbassadorOfQuan
      @TheAmbassadorOfQuan Před 7 měsíci

      I need to change my battery, I'm not looking forward to it...

  • @metronyc2855
    @metronyc2855 Před 7 měsíci

    wow, that's a lot of heat work, but this is what most of the videos do not show you. Thanks for the full story.

  • @walterwang5996
    @walterwang5996 Před 8 měsíci

    any link to purchase the battery? Thanks.

    • @77wassu
      @77wassu Před 8 měsíci

      www.amazon.com/Battery-Replacement-Microsoft-Keyboard-G3HTA065H/dp/B09JSC5M8T

    • @77wassu
      @77wassu Před 8 měsíci

      What you need to know is the battery code which is G3HTA065H for the Keyboard side. You can search on google to see results in your area. Cheers!

    • @walterwang5996
      @walterwang5996 Před 7 měsíci

      @@77wassu I replaced my battery. but after that, the keyboard and trackpad are not working. I changed back to original battery, the same. And the NVDIA GPU disappeared and USB not comms, only charging. Do not know why.

  • @chevymalave7406
    @chevymalave7406 Před 8 měsíci

    'promosm' ❣️

  • @zafro961
    @zafro961 Před 8 měsíci

    How do you connect your pc to a car?

    • @77wassu
      @77wassu Před 8 měsíci

      You have to get an OBD2 cable with VCDS like this one

    • @77wassu
      @77wassu Před 8 měsíci

      store.ross-tech.com/shop/vchv2_ent/

  • @radaoctavian29
    @radaoctavian29 Před 8 měsíci

    Full power

  • @andrei_isc.14
    @andrei_isc.14 Před 8 měsíci

    Dacă îmi iese fum când apăs butonul de avarii e normal? Un prieten mi-o zis ca am făcut ceva în scurt, eu m am gândit să-l schimb și după va merge perfect (și fără fum)😂

    • @77wassu
      @77wassu Před 8 měsíci

      😂 100% este un scurt. Poate sa fie si din releu si sa se rezolve

  • @digitalmarketingservicesworld

    nice

  • @4To2Jest0Dramat
    @4To2Jest0Dramat Před 9 měsíci

    Yo, stock or chip? Nc1

    • @77wassu
      @77wassu Před 9 měsíci

      Hi, stock 131hp

  • @domnupetreb
    @domnupetreb Před 9 měsíci

    Good launch bro. Long live the old cars!

    • @77wassu
      @77wassu Před 9 měsíci

      True that pal! 👍 and thanks, 2010 old memories. Still have this car and I will probably take it to Mars if Elon Musk is going with his rocket.🚀

  • @madmat114
    @madmat114 Před 9 měsíci

    if your tablet screen battery is stuck on zero but too risky to replace would changing the keyboard allow you to carry the whole laptop from room to room etc and work off that battery alone or does that screen battery need to be replaced to work ? for context both my batterys are at zero and laptop wont work without being plugged in . i dont mind just changing one tablet .

    • @77wassu
      @77wassu Před 9 měsíci

      In my case I had the same issue with both on 0% (working only plugged) and after the replacement of the keyboard battery I noticed both batteries started to work fine and the culprit was still the main battery. Did your screen started to bulge or has some deformation? it usually happens when the batteries are done. If you have no expansion of the screen battery it could mean the laptop is ok. I even took it to a Microsoft dealer and they also said that both batteries are toast but eventually only this replacement did the job.

    • @madmat114
      @madmat114 Před 9 měsíci

      nice my tablet is at 0% but hopefully it's still working My screen tablet part is not bulging but neither is the keyboard.going to go ahead and get the keyboard battery part replaced @@77wassu

    • @nichderjeniche
      @nichderjeniche Před 7 měsíci

      ​@@77wassuinteresting, my screen battery is 0% but my main battery works fine. So it's still most likely the screen battery?

    • @77wassu
      @77wassu Před 7 měsíci

      @@nichderjeniche have you noticed any bulging of the screen if you look at it closely from an angle? The ones in the screen do fail as well. It only depends on if you use the main one or the tablet more.

    • @nichderjeniche
      @nichderjeniche Před 7 měsíci

      @@77wassu nope, it looks perfectly fine. Main is 97% health, screen is 0% and doesn't even charge. Its actually a Microsoft co-developed surface-like device, it's not a surface, I know it uses different batteries inside, that's most likely the reason there's no bulge

  • @sh1vrm
    @sh1vrm Před 9 měsíci

    Mis*crosoft🤘🤙

    • @77wassu
      @77wassu Před 9 měsíci

      Nice one 👍😅

  • @KeithGlanville
    @KeithGlanville Před 9 měsíci

    I'm about to do this. This is not a bad video but is missing some detail regarding the actual lock actuator removal. At 15 mins in, how was the white plastic lock cover removed (other videos say the window has to be partially removed but in this video it suddenly appears out in your hand)? Also, there needs to be more detail on the electrical connector to the lock and the interior and exterior handle cables connections. Perhaps it is clear once you are doing it but at the moment an other advice would be helpful.

  • @IIIIIIPETEIIIIII
    @IIIIIIPETEIIIIII Před 11 měsíci

    Do us a favour, record in landscape and skip the music next time! It would also be helpful if you include an explanatory narrative and use a tripod wherever possible.

  • @Rajsta78
    @Rajsta78 Před rokem

    I'm about to do this on my 2011 c6, this is going to help alot👍🏼. The only weird thing is that I don't know which replacement lock to buy as for some reason there are many part number for the lock!

  • @user-pm3dx4te4f
    @user-pm3dx4te4f Před rokem

    What torx mm Screw is that?

  • @user-pm3dx4te4f
    @user-pm3dx4te4f Před rokem

    Thank you very much for the video, gonna do this the next week after the lock actuator arrive

  • @iosebmeladze7971
    @iosebmeladze7971 Před rokem

    I have the same problem please reply

  • @iosebmeladze7971
    @iosebmeladze7971 Před rokem

    Watch a very good video, thank you. I saw it done, I did not understand how?

  • @danielvaduva9165
    @danielvaduva9165 Před rokem

    In The title it says repair not replace you did not shower any repair at all just how to dismantle the door trim.

    • @77wassu
      @77wassu Před rokem

      Yeap, the actual fix is changing the whole lock mechanism as it's not worth it to attempt a repair. Just buy new a door lock. It will make your life much easier :) and stay away from second hand ones. These will fail sooner or later. Cheers!

  • @tanasealin1202
    @tanasealin1202 Před rokem

    So what did you do?

  • @ditalaur8888
    @ditalaur8888 Před 2 lety

    Salut mie îmi stă partea stângă aprins și nu știu de unde și fără contact tot sta aprinsă far fata spate și fateral dar nu clipește doar sta aprins am schimbat releul de la buton avarie de unde ar mai putea sa fie modul confort sau sa fie în scurt ?

    • @vulpe1597
      @vulpe1597 Před rokem

      Salut ai rezolvat problema si la mine tot asa face acum

  • @richardogden6894
    @richardogden6894 Před 2 lety

    Do you not have to take the window out?

    • @77wassu
      @77wassu Před 2 lety

      No, you don't have to take the window out. You just have to fiddle a bit the lock but it comes out.

  • @gacraus4385
    @gacraus4385 Před 2 lety

    My problem was that I could not lock the car with my car key. I had the car robbed a few times after leaving it over night with front passenger door unlocked and decided to look into what I could do. Ofcourse I stumbled upon his great video which is of great help for anyone who decides to change their lock actuaor module. However, if you do not have the time or money to take it to a shop immediaely, a quick solution for locking your door is to look at the edge of the door and locate the MANUAL LOCK SWITCH. On my 2008 audi a6 there is a round cap with a lock icon on it, you pull that out and inside is key hole like mechanism, THIS is the MANUAL lock. You turn it 45 degrees clockwise and it will lock your car. To unlock it when a passenger wishes to enter the vehicle you simply pull the door handle from the inside and it unlocks it. Hope this helps. I also noticed that when i lock the car from my car key now, the beep sound is back. The car lets you know that the car is not locked properly by not making that beep sound upon locking. Hope this helps.

    • @VictorGonzalez-eu3vp
      @VictorGonzalez-eu3vp Před 7 měsíci

      You’re a damn life saver bro I was afraid I couldn’t unlock my door

  • @gacraus4385
    @gacraus4385 Před 2 lety

    Great video. Very detailed.

  • @creationtime7099
    @creationtime7099 Před 2 lety

    Cat te-a costat navigatia si de unde ai luat o(are bluetooth?)

    • @77wassu
      @77wassu Před 2 lety

      Salut! O am de foarte mult timp, 2009 chiar a rezistat eroic, si da are bluetooth pentru telefon, fara vreo problema. La vremea aceea undeva la 1400-1500Ron undeva prin zona Tineretului. O sa vad daca dau de tipul de la care am luat-o.