![Ed Duda 3](/img/default-banner.jpg)
- 15
- 1 053 380
Ed Duda 3
Registrace 18. 09. 2007
Hutchinson Wooden Boat Salvage
Quick video of a recovery of a classic Hutchinson Brothers Wooden boat built in Alexandria Bay, NY. We did not know why the boat sank but quickly figured it out...
FYI.. it was only down there 2 or 3 days.. watch the first dive without airbags on it and you can see the deck is super clean. Then look at the second dive (with airbags) and it starting to get cover in slime!!!!
FYI.. it was only down there 2 or 3 days.. watch the first dive without airbags on it and you can see the deck is super clean. Then look at the second dive (with airbags) and it starting to get cover in slime!!!!
zhlédnutí: 535 570
Video
Chasing M2 Underwater ROV Drone Unboxing / Test
zhlédnutí 9KPřed 4 lety
Just received the New Chasing M2 Underwater ROV Drone. Check out the fast unboxing and the first splash in on a shore dive wreck on the Islander in the amazing Saint Lawrence River. The M2 has a very impressive 4K Sony camera, surprising power, super bright LED lighting and DJI like controls. If you can fly a drone you can run this with ease. Subscribe for a future review and new adventures.....
$5000 Lost Prop Recovery
zhlédnutí 4,7KPřed 4 lety
Got a call to help find a missing propeller. But not an ordinary size pro...this thing was 150 lbs of bronze and 32" diameter. Thankfully we got it back for the owners. But they still had to deal with a sheared starboard shaft.
Ice Out Dive
zhlédnutí 612Před 5 lety
A quick dive in April. Tested out some new gear in freezing water. We had some free flows due to the cold water temps and heavy breathing...lol. Stay tuned for some up to date vids.
Ice Dive Recovery
zhlédnutí 1,7KPřed 5 lety
Recovery of a trash rack rake. Not as exciting as Ice Fishing for a Mega Cab Cummins Truck but a super cool video showing some of the challenges of getting to your work site, under the ice. I should have taken a snow shovel down with me. Water was super clear but as you will see ice cold. Hero7 housing: www.amazon.com/dp/B0749DBX11/ref=cm_sw_em_r_mt_dp_U_ViLPCbE0YTP7V Music: Dark Tranquility by...
Ice Fishing Gone Wrong Cummins Mega Cab Dodge Salvage
zhlédnutí 446KPřed 5 lety
Had to go ice fishing for a cummins mega cab dodge, I stated miles out wrong it was roughly 4.6 miles from the boat launch in 24 feet of water but luckly 1200 feet from a shore line.
Slushy Ice Dive
zhlédnutí 10KPřed 5 lety
Canal inspection of Glen Park Hydro. Had to deal with some hard water but the excavator made quick work of it. Got the job done even with 20 foot of slush ice...
Fishing for Millsite Lake Monsters
zhlédnutí 2,2KPřed 5 lety
Well I have a little fishing video...an little above water fun time. We have been fishing on the Indian River chain for years. Great times,always making memories and struggling to find the bigger fish!!! 🎣
Underwater Torch Cutting Steel
zhlédnutí 6KPřed 5 lety
Finally got a min to edit this in my FCPX. Large learning curve!! Anyway, Here is some underwater cutting of some steel and the best thing is it right down the street. Great visibility, which is never the case normally. I have hours of new diving coming. Thanks for watching, like and subscribe.
MAS Salvage
zhlédnutí 2,2KPřed 6 lety
Emergency dive to salvage an arresting arm that is used as a safety measure to stop either forward or reverse excess movement of a ship. It basically will save the lock gates from an impact that could breach the lock and would cause massive loss of water control.... basically, a very bad day.
Diamond Island
zhlédnutí 309Před 6 lety
A quick inspection of a 100 year old hydro, they had some issues with controlling the wicket gates due to debris.
Diving at Alice Falls
zhlédnutí 1,3KPřed 6 lety
Little dive at Alice Falls in Keeseville, NY. We need to remove some sandbags and wedges to get this hydro back running. Making clean power.
Inside a hydro
zhlédnutí 14KPřed 6 lety
Little dive to get a Hydro back up and running. Site is an old paper mill from 1900's. Super old gates (well old guides) that need a bit of help sealing and some very well used turbines. That continuesly need attention.
Underwater Torch Cutting
zhlédnutí 19KPřed 6 lety
Here is a short vid of some underwater cutting of steel with a exothermic torch and Firewire rod.
Fishing Pole Rescue
zhlédnutí 679Před 6 lety
The Thousand Islands New York on the gorgeous St. Lawrence River. My son decided to test the waterproofing of his fishing pole?? or maybe just likes to test my treasure hunting and/or salvage skills. We had some family fun rescuing his lost fishing pole.
Hope yall picked up the stuff that was beside the boat up too
Salvers get their time and 💰.
Yikes,the Paint was holding the bottom on.
June 2024 we need updates on repais .. is it running and hoping under original power plant 😅😊👍
Well, it's been three years since this video was published. Was it salvaged or scrapped?
What are you looking at here are some very very very very very expensive firewood
Is it busted?
Waste of time fellas..
So why did it sink then? That long hole sure was not there when they left. Did they hit something?
garbage
The bottom will definitely be completely swelled now! Might not sink this time
WELL THAT A MONEY PIT A HOLE IN THE WATER YOU KEEP POURING MONEY INTO.
Hard to believe owner wasnt aware the waterline was in that condition.
You salvaged a reef? LOL
To make it simple, tie a heavy rope around the base of the boat. Attach the 4 air bags directly to that rope so they stay as low as possible. The boat will rise up above the water line. Tow it to a boat ramp, pump the water out of the boat and pull it onto a trailer. That boat is in bad shape and has been down there awhile.
Gaffer tape bondo she'll be alright
Given the flag im guessing they went down pirates weekend
why don't people check the audio levels on their videos before uploading? .
Hallo from Germany behinde 3 Years has this Boat a 2 nd live ?
Looks like hull split on right side, was rotted
Delta p is SCARY
Yeah, probably should have left it where it was, I can't believe it didn't sink at the dock before they went out.
She was in very bad shape.
Need an update!
I’ll ask around and see what is going on with it.
Was it hit over stone or smth?
It just was rotten wood
Fix your shitty audio.
Boat has been restored. Don’t know the story of why it ended up on the bottom of the river but it floats again.
We were not the team that pulled the boat, Fyi.
Good news then….I heard it was becoming a bar!! Email me a contact maybe we can get an after the washing video!!
Can you provide more information?
I think that split was caused by lifting it too fast and not supporting the bottom. The weight of the water just pushed the bottom away from the sides. You can tell the water was high up in the hull because it was pouring out of the vents at the rear. The wood might have been rotten too, which would not have helped.
That's what they're going to have to do in Baltimore.
I love this shit
I have two science degreees
Baltimore Bridge anyone?
I will never put my so loved pick-up in this kind of trouble...😄
your sound sucks like joe biden
Não compensa, virou sucata.
Can we get an update? Seeing this four years later.
the lift bags need AIR. They dont lift without air!
How deep?
20-25 feet
QUIT showing things like this from FOUR YEARS AGO!!!
Definitely don't want that dodge junk rotten up the water
Y would u take a 8000lbs dodge Cummins on ice like that lol what a dummy
Good job men.
No spank you! Eff that! I live in the Scottish highlands and my granddad worked building hydroelectric dams after WW2. We have lots of them up here and they all scare the bejaysus outta me!
You definitely need to pay attention to everything.
Need some scuba divers to go down and hook up that dodge. LMAO
I think that will buff out
❤❤❤
Story time. I grew up in a small middle eastern country that was part of the former Soviet Union. Housing in the 90s was scarce due to the severe economic recession/depression that rocked the region. My father is a welder, and worked in a boiler station that had since been abandoned. The whole complex was a big factory that produced things like plastic bags, candles, weirdly - fruit jam, and of course there was the steam. This is the steam that would be fed into the city to warm homes during winter (those old school radiators that they still use in Europe). Anywho, since my dad worked there, we were given a converted changing room as home. The word "changing room" is deceiving - imagine a locker room big enough for a factory that employed hundreds of people. The place was huge, there was exactly 1 window at the back of the "house". The ceiling was close to 20' and that "window" was greater than 10' high. Needless to say, we never saw the back side of that window, and to be honest it overlooked the factory so there wasn't much to see except decay. As a kid in an almost lawless land, I would go and explore that factory (that's how i know what they used to make). But one time, my father, his friend, and I went deep into the factory, to the back side of our "house" where I had never been before. Right beneath that giant "window" that looked into our home was a steel grating floor, and a few feet below it was a black pit of water, and some industrial blue pipes and a pump. The image of us walking over those steel grates over god knows what substance was underneath our feet still terrifies me. The whole factory was scary but nothing will ever compare to the day I saw those grates. As you are showing us in this video that the turbine have started by looking at the water rushing under those similar steel grates, it just shot me back to when I was 7 years old behind our old house. I've always had a fascination for industrial places, but still nothing will ever terrify me as bad as water in a factory (or a hydro plant). To add insult to injury, in order to leave our house we had to walk out of the front of the factory gates. On the way out of the factory, out in the open air, was a massive overflow pool that the boilers used to use (these boilers were easily thousands of gallons big... it was a massive complex that served the whole city). My dad took my sister and I swimming in that "pool" ... mind you this is not a swimming pool with a depth of 3 feet... that thing was a flat rectangle at least 15 feet deep. TERRIFYING. Over years of neglect, obviously the water evaporated or drained, the pool became filled with garbage and rubble from the old factory. One year before we finally left that house for a real, beautiful, apartment I actually fell into that fucking pool. 15 feet down. Broke my fall on garbage and a foot of stagnant water with algae and frogs in it. Luckily all that happened is I broke my arm, and that is the ONLY injury I ever sustained during my idiotic explorations of that factory.
Should have taken a screw Driver down took off the Hardware and salvaged that and left the rest down there .
lol that’s littering!! 😳
❤❤❤❤ that's what you call a slipper bottom right flip it over and take the bottom off of put new one on that and 10,000 good as new
I learned also welding under water with other training.
A Big “Cash Injection” will be needed here! 🏦🏦🏦🏦
Floatation Devices!
Remove the engine and gas tank this one is firewood