Video

Try on Facebook there is some artillery owners groups

Not sure. I reinstalled the original firmware and it hasn't done it since

I created them myself in inkscape and lightburn

No way lol. Can this same pattern and color be done of anodized aluminum lol?

Not as good

Sell settings lol

Same file but different settings for each color. Done in Lightburn

@@deervalleyengravings3088 thank you for your response

That's just how they made it.

I have not

@@deervalleyengravings3088 for some reason that's the only way I can get it to come up at lest using the slicer they provide with it. don't "save TFT to whatever" for some reason it only works with "export as TFT" then select your micro sd card.

Bed leveling is where I would start first. Also be sure bed is clean

I tried that but the paint was so hard to get off did you wet the rag down or anything?

Kind of.

I'm the one that sent you the x3 plus original firmware. I thought I recognized your name.

@@deervalleyengravings3088 yes, thanks for that, also! I'm learning to love my naughty X3. Fixing a few bad assembly issues, and just moving forward. Big 4040 extrusions sides and back, nothing in the front. Almost back to printing with it.

@@davedempsey5282 yeah i do like it as well. Want to figure out a smoother spool holder. The stock one seems to draw a bit too much.

@@deervalleyengravings3088 I haven't had mine working long enough to say. Everytime I try to reinstall that button, it stops working. Finally just gave up and run it without. Turns out the board is just hanging in midair and really hard to line up properly.

I have not

I will share it tomorrow when I get back to my machine

Pull it iff

Off

Hello. What do you mean with "stretch the hotend cover"?

Why do printer companies always leave the M600 out of the firmware!? This is one of the main reasons I convert to Vanilla Klipper. You get all the features, and more

​@@geauxracerxand now you can on the X3 😀😀

@@TheFeralEngineer have you tried TPU on it? My X2’s and genius pro can, but I have to baby sit them the entire print so they filament doesn’t hang for even a second; or it kinks and can’t recover

@@geauxracerx not yet. I print a minimal amount of tpu, but what I've learned from all metal hot ends is that you can barely have any retraction at all and you need to print slowly. I think my best luck was 0.1 or 0.2mm retraction and 50mm/sec on my Neptunes. This machine was sent to me and I really only need it when I run production of a 4 part assembly I sell on my Etsy page because it's 4 different colors and it's so nice to batch everything out in a few hours 😀

I just printing with what it comes with

Possible I guess

It would probably destroy the flats

When I took the bed off I was able to tighten the bolt up a little. That seemed to fix it.

brother una pregunta? sabes si el artillery x2 y x3 plus son del mismo tamaño y capacidades similares? quiero comprarme mi primera printer 3D pero no se por q plataforma comprarlo. En un primer momento quise la ARTILLERY x2 pero me dicen q ya está dejando de ser producida pese a ser "moderna". Donde compras tus impresoras? Tmb soy de Perusalem.

@@submarinodeaire2127 hola, son el mismo tamaño la X1, X2 y la X3 plus

English please

@@deervalleyengravings3088Which slicer do you use for the X3?, I already have mine, but I don't know which slicer to use. Thank you

I used one that came with machine untill I can make a profile in another slicer.

The two center wheels are basically for bed rigidity. It is more to keep the bed flat than for tramming the bed.

Yes auto leveling no WiFi

I took the magnet sheet of the top and the bolt are right there. Just took it all loose so i could get to the bolts and nuts better.

I have not tried it yet

Different power and frequency settings with fiber laser.

@@deervalleyengravings3088 do you know if you can achieve the same thing with a CO2 laser?

@danielgumm3867 I don't think so. I have one as well

You can do that on the touch screen

But is it possible to do it during a print? Can the car start again?

I have not hard either of those printers. The x2 does have larger print bed.

I think it's louder.

Yes it is louder. The fans are louder, in the power supply and the part cooling fan. To print so fast you do need better cooling. Add the high speed motion to that and you're not going to be watching TV or talking on the phone right next to this printer like you can the X1 and X2. This is the same with the Bambu printers. I know because I have one. High speed printing sacrifices quiet, and these printers are running quiet drivers.

@@rburks many thanks for your answer. I was thinking buy one. I also have a X1 carbon and yes, it isn’t the quieter printer but it is closed which reduces the noise. But bambus printer are 3 to 5 times faster than a x1 or x2 (I also have both). I don’t know if these new models from artillery are valuable for the price versus speed in comparison to other printers like elego or Bambu. Best regards

According to Artillery they will be selling nozzles of different sizes on their web site soon. I'm glad to see here that the old ones still screw in. Maybe if we are able to order more silicone socks from Artillery then we can just trim the little lip off of one and use it for standard Volcano nozzles.

I use glass cleaner, acetone, or rubbing alcohol

I cleaned it a couple times. Did Z offset first. Then manually leveled it. Then did the automatic leveling. That's it

This is exactly what should be done, but I don't remember anyone telling me that on my first printer and I remember struggling back then. It seems like it should be pointed out that those are necessary first steps. I have a few X2's that have basically been trouble free. I almost pulled the trigger on the X3 but then found out they already have an X4 with wifi connectivity. So I decided to wait for it to be officially released. @@deervalleyengravings3088

I also had the benchy come loose two times, and my bed was perfectly level and my z offset was good. Everything else I've printed so far has stuck very good to the bed. I happened to have some VisionMiner NANO Polymer Adhesive that I haven't tried out yet, so I put some on the middle of the bed and was able to finish the benchy without it coming loose.

@@rburksjust start dropping your z offset by.02 at a time till it gets a solid stick

I do not know yet which one it uses. I have not seen a .6mm nozzle available for it. But I also haven't dug into it that deep

@@deervalleyengravings3088 I think they use the same as on the X2 - but it would be nice if you can confirm. But not so important - in a few days I should have mine - and I can order the 0.6mm later as well.

I look at the extra one

New video with nozzle is up

Shoot. Mine did come with the profile.

Mine didnt have the actual profile. It came with an older version of Cura it is in it after you install it.

I will doy best

Guys new video I posted show nozzle

I will as soon as I play with it more.

30 Watt Raycus Fiber

All 4